1 / 7Product guide
Xiuganpo GY-302 BH1750 Digital Light Sensor Module
The Xiuganpo GY-302 BH1750 digital light module is a compact sensor board specified for 3–5V power and digital light readings. Its direct output is intended to reduce calibration calculations, making it a candidate for electronics projects that need ambient-light measurements.
At a glance
- Uses a BH1750FVI chip and a 16-bit converter, with a stated data range of 0-65535.
- The listing describes direct digital output intended to avoid complicated calibration calculations.
- Specified for a 3–5V supply, with applications including photography and environmental monitoring.
Often bought together
Pros and cons
Pros
- The listed supply range accommodates projects designed around 3V or 5V power.
- Small stated module dimensions suit compact sensor builds.
Technical specifications
13 specifications| Brand | Xiuganpo |
|---|---|
| Module type | Digital Light Intensity Module |
| Model | GY-302 BH1750 |
| Light sensor chip | original ROHM BH1750FVI chip |
| Converter | 16-bit AD converter |
| Data range | 0-65535 |
| Supply voltage | 3-5V |
|---|
| Module size | Approx. 13.9mm * 18.5mm / 0.5 * 0.7in |
|---|---|
| Weight listed | 3 g |
| Mounting hardware | no |
| Number of items | 1 |
|---|---|
| Package dimensions | 6 x 6 x 1 cm; 3 Grams |
| Country/region of origin | China |
What to know before buying
- The listing calls the output direct digital and says calibration is unnecessary, but does not specify an interface, communications protocol, measurement units, accuracy tolerance or integration instructions. Confirm these details against your controller and project requirements.
Who is it for?
A good fit for
- Makers adding light-level sensing to electronics projects.
- Researchers or technicians seeking a module specified for 3–5V operation.
- Projects involving ambient-light measurements, photography or environmental monitoring.
Less suited to
- Buyers who need documented accuracy tolerances, measurement units or interface details before selecting a sensor.

Frequently asked questions
What power supply does the GY-302 require?
The listing specifies a 3-5V power supply. Check that this range suits your controller and wiring.
Which sensor chip and converter are specified?
The listing names the ROHM BH1750FVI chip and a 16-bit AD converter.
Does the listing describe the module's interface?
It describes direct digital output but does not name an interface or communications protocol. Confirm compatibility with your controller before buying.
What size is the module?
The listed module size is Approx. 13.9mm * 18.5mm / 0.5 * 0.7in.

Alternative options

Lonely Binary TinkerBlock ESP32-S3 Starter Kit, 12 Sensors, for Arduino IDE | Dual USB-C Ports, WiFi and Bluetooth LE, works with Arduino IDE, MicroPython, ESP-IDF, IoT and Smart Home Projects
$44.99

120 Pcs 10cm Multicolored Dupont Wire 40pin Male to Female Male to Male Female to Female Solderless Breadboard Jumper Wires Ribbon Cables Kit for Arduino and Raspberry Pi
$9.99

MOSFET Module, with Indicator MOS Tube Module, Quick Connection Strong Anti-Interference Ability for High Power Equipment Lamp Control
$10.70

4 Pcs/set Clock Module DS3231 High Precision RTC Clock Module Memory Module for Raspberry Pi
$26.19

Lonely Binary 120-Pack Breadboard Jumper Wires 20cm M-M M-F F-F for Arduino | 40 each: male-male, male-female, female-female; 20cm/7.8in, multicolor; for breadboard, Arduino, ESP32, STEM
$12.99

DIGISHUO ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
$18.26

DIGISHUO 2Pcs ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
$22.89

Freenove Touchscreen for Raspberry Pi 5 4 Screen Display Monitor 7 Inch IPS | 800x480 Pixel, 5-Point Capacitive Touch Screen, Integrated Back Mounting, Driver-Free Easy to Use
$68.95
$6.61$8.14
Save 19%
