Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Wire Revolution Nichrome 80 Resistance Wire, 22 AWG, 30.5 m

Wire Revolution Nichrome 80 resistance wire is a 22 AWG spool intended for heating-element projects, foam cutters and other listed uses. Its stated resistance is 3.35 ohms per metre, with a 30.5 m length for projects needing a longer continuous supply.

At a glance

  • The listing describes Nichrome 80 as an 80/20 nickel-chromium alloy for general heating work.
  • The stated resistance and wire length help when sizing a heating element or foam-cutter span.
  • The manufacturer says the wire remains flexible after use and is easy to wind into coils.
  • The manufacturer describes each spool as carrying a production batch number for traceability.
Price
$28.01Save 15%

Reference price: $32.95

Price checked: 18 Nov 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • 30.5 m on one spool suits projects requiring more wire than a short repair length.
  • The stated resistance per metre supports calculations for a planned element length.
  • The listing identifies uses ranging from foam cutting and heat sealing to kiln repairs and hobby electronics.

Cons

  • At 22 AWG, the listing characterises this as a heavier gauge with lower resistance than finer wire, so it may not suit designs requiring higher resistance in a short length.

Technical specifications

17 specifications
Identity and construction
BrandWire Revolution
Alloy/material listedChromium, Nickel, Trace Elements
Alloy description80/20 nickel-chromium alloy
ColourSilver
Wire formRound wire
Number of wires1
Dimensions and electrical properties
Gauge22 AWG
Diameter0.64 mm
Length30.5 m (100 ft)
Resistance3.35 ohms per metre
Resistance per foot1.0206 ohms per foot
Operating claims and uses
Maximum temperature claimed1200 °C
Example at 12 V1 m of this wire on 12 V draws about 3.6 A (43 W)
Listed applicationsreplacement heating elements, hot-wire foam cutters, heat sealers, kiln and furnace repairs, resistors and hobby electronics
Origin and identification
Country of originAustralia
Part numberN80-22-100
Batch traceabilityEvery spool carries the heat (batch) number from production

What to know before buying

  • The guide of about 3.6 A (43 W) applies to 1 m of wire on 12 V. The listed maximum temperature is a material-use claim, not a recommended operating temperature for every build.

What’s in the box

Included
  • Plastic spool
  • Nichrome 80 round wire, 22 AWG (0.64 mm), 30.5 m

Who is it for?

A good fit for

  • People replacing or building heating elements who need a stated resistance per metre and a 30.5 m supply.
  • Foam-cutter and heat-sealer projects where the listed 22 AWG wire gauge and lower resistance are suitable.
  • Hobbyists working on the listed kiln, furnace, resistor or general heating applications.

Less suited to

  • Buyers seeking insulated electrical cable or a multi-conductor lead. The listing describes single round resistance wire.
  • Projects whose required resistance, current or operating conditions do not match this wire's specifications.
Wire Revolution Nichrome 80 Resistance Wire, 22 AWG, 30.5 m · photo 2
Additional product photo 2

Frequently asked questions

How long is the spool?

The listing specifies 30.5 m (100 ft) of wire.

What resistance does this wire have?

The stated resistance is 3.35 ohms per metre, or 1.0206 ohms per foot.

What projects is it listed for?

The listing names replacement heating elements, hot-wire foam cutters, heat sealers, kiln and furnace repairs, resistors and hobby electronics.

What does the 12 V example mean?

The manufacturer gives about 3.6 A (43 W) for 1 m of this wire on 12 V. Treat that as a length- and voltage-specific example rather than a universal operating value.

Wire Revolution Nichrome 80 Resistance Wire, 22 AWG, 30.5 m · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.6
meite 7 mm V-Nails, 4,000 Pieces
meite 7 mm V-Nails, 4,000 Pieces

A$52.99

A$40.84

-23%
-23%
Product details in Markdown