Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Sorlaarti P2S Hotend Kit, 0.4 mm Hardened Steel Nozzle

Sorlaarti’s P2S hotend kit is listed with a 0.4 mm hardened steel nozzle and a pre-assembled hotend. The maker says it is intended for Bambu Lab P2S printers and resists wear from abrasive filament, making printer-model compatibility an important check before ordering.

At a glance

  • The maker describes the nozzle as removable and wear-resistant with abrasive filaments such as carbon-fibre-filled PLA and PETG.
  • The hotend is supplied assembled, so the stated installation task is fitting the heater and thermistor.
  • The listing describes nozzle replacement by heating the hotend to about 260 C and using the wrench to hold the heat block.
Price
$15.29Save 15%

Reference price: $17.99

Price checked: 18 Nov 2026

View offer

Pros and cons

Pros

  • A 0.4 mm hardened steel nozzle is specified for buyers printing abrasive-filled filament.
  • Pre-assembly avoids having to build the heat sink, throat and heat block into a hotend assembly.

Technical specifications

6 specifications
Identity
BrandSorlaarti
Nozzle and compatibility
Nozzle diameter0.4mm
Nozzle materialHardened steel
Listed printer fitBambu Lab P2S
Dimensions and installation
Weight listed40 g
Hotend assemblyPre-assembled

What to know before buying

Listing details to confirm

The listing says the heater and thermistor differ from the X1 series and are not compatible with it. Confirm the printer is a P2S before buying. No customer feedback or ratings were supplied.

What’s in the box

  • Assembled hotendCheck selected pack
  • Hardened steel 0.4mm nozzleCheck selected pack
  • Ceramic heaterCheck selected pack
  • ThermistorCheck selected pack
  • Silicone coverCheck selected pack
  • WrenchCheck selected pack
  • Thermal greaseCheck selected pack

Check which accessories are included in your selected pack before buying.

Who is it for?

A good fit for

  • Bambu Lab P2S owners looking for a replacement hotend with a 0.4 mm hardened steel nozzle.
  • Users printing abrasive-filled PLA or PETG who want the listing's claimed wear resistance.

Less suited to

  • Owners of Bambu Lab X1 series printers, which the listing says are incompatible.
  • Buyers seeking a nozzle diameter other than 0.4 mm.
Sorlaarti P2S Hotend Kit, 0.4 mm Hardened Steel Nozzle · photo 2
Additional product photo 2

Frequently asked questions

Which printer is this hotend listed for?

The listing identifies Bambu Lab P2S printers and warns that the heater and thermistor differ from the X1 series. Confirm your exact printer model before ordering.

What nozzle is specified?

A removable 0.4mm hardened steel nozzle is listed. The maker says it resists wear from abrasive-filled PLA and PETG.

Does the listing describe a pre-assembled hotend?

Yes. It says the heat sink, throat and heat block arrive assembled, with installation involving the heater and thermistor.

How does the listing describe changing the nozzle?

It says to heat the hotend to about 260 C, hold the heat block with the wrench, then unscrew the nozzle. Follow appropriate handling precautions when working with a heated hotend.

Sorlaarti P2S Hotend Kit, 0.4 mm Hardened Steel Nozzle · photo 3
Additional product photo 3

Alternative options

Product details in Markdown