1 / 6Sorlaarti P1 Series Hotend with Removable 0.4 mm Hardened Steel Nozzle
Sorlaarti’s P1 Series hotend is a replacement assembly listed for Bambu Labs P1 Series 3D printers, with a removable 0.4 mm hardened steel nozzle. The listing says it does not include a cooling fan or retaining clip, so check whether those parts are needed for your installation.
At a glance
- Heat sink, throat, heat block and removable nozzle are described as already assembled.
- The listing says the ceramic heater and thermistor must be attached separately, or saved for future use.
- The product description states the assembly has no cooling fan or retaining clip.
- The listing specifies preheating to about 260℃ before replacing the nozzle and cautions users to protect their hands from heat.
Pros and cons
Pros
- The removable hardened steel nozzle can be changed with the supplied wrench, according to the listing.
- The heat sink, throat, heat block and nozzle are described as preassembled, reducing the assembly steps before fitting the heater and thermistor.
Cons
- The described assembly is supplied without a cooling fan and retaining clip, which may limit suitability if your replacement requires those parts.
Technical specifications
3 specifications| Brand | Sorlaarti |
|---|
| Compatible devices | Bambu Labs P1 Series 3D printers |
|---|
| Weight listed | 150 g |
|---|
What to know before buying
Listing details to confirm
The listing is inconsistent about kit contents: it says there is no cooling fan or retaining clip, while claiming an assembled hotend, nozzle, ceramic heater, thermistor, silicone cover, wrench and thermal grease. Confirm the selected listing’s actual package contents before buying. Compatibility is claimed for the P1 Series and explicitly excluded for the X1 Series due to heater and thermistor variations. For nozzle replacement, the listing advises preheating to about 260℃ and protecting your hands from heat.
What’s in the box
- Assembled hotend with removable 0.4mm hardened steel nozzleCheck selected pack
- Ceramic heaterCheck selected pack
- ThermistorCheck selected pack
- Silicone coverCheck selected pack
- WrenchCheck selected pack
- Thermal greaseCheck selected pack
- Cooling fanNot included
- Retaining clipNot included
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- P1 Series owners seeking a replacement hotend with a removable 0.4 mm hardened steel nozzle.
- Users who already have the required cooling fan and retaining clip, or do not need them for their installation.
Less suited to
- X1 Series printer owners, as the listing states this hotend is not compatible.
- Buyers who require a hotend assembly that definitely includes a cooling fan and retaining clip.

Frequently asked questions
Which printers is this hotend listed for?
The listing claims compatibility with Bambu Labs P1 Series 3D printers and says it is not compatible with the X1 Series. Check your printer and heater and thermistor configuration before buying.
Does it include a cooling fan?
The listing says the assembly is without a cooling fan and retaining clip. It also describes a kit, but the stated contents are inconsistent, so confirm what is included with the selected listing.
What is the nozzle size and material?
The listing specifies a removable 0.4mm hardened steel nozzle.
What does the listing advise for nozzle replacement?
It recommends preheating the hotend to about 260℃ and warns users to protect their hands from heat.

Alternative options

LEOWAY P1P P1S Hotend Complete Kit with 0.4mm Hardened Steel Nozzle | Full Assembly Hardened Steel Hotend , Ceramic Heater, Thermistor, Cooling Fan, For Bambu Lab P1P/P1S 3D Printer
$32.99

for Bambu Lab P1S Hot End, for Bambu Lab P1S Hotend Complete Hotend Fan Complete Hot End P1S Fan for Bambulab Nozzle 0.4 Nozzle with Fan,Thermistor,Ceramic Heater-0.4mm
$36.99

Asixxsix P1P / P1S Hotend Complete Kit, Full Assembly Hardened Steel Hot End with Fan, Thermistor, Ceramic Heater, and Extruder Heating Block Replacement, 0.4mm Nozzle
$31.53

Zerodis LAB P1P P1S of Ceramic Heating Thermistor Kit Compatible with Stable Heating and Precise Temperature Registry
$18.00

4-Pack Hotend Kit Compatible with Bambu Lab P2S/H2D/H2S/H2C, 0.2/0.4/0.6/0.8mm Hardened Steel Nozzles with Silicone Sleeves, 3D Printer Replacement Parts
$36.65

Jiawu 3D Printer Hotend Complete Kit Replacement with 0.2mm Nozzle Integrated Heater Thermistor Module for Bambu Lab P1P P1S Printing
$30.18

LEOWAY P1P P1S Hotend Complete Kit with 0.6mm Hardened Steel Nozzle | Full Assembly Hardened Steel Hotend , Ceramic Heater, Thermistor, Cooling Fan, For Bambu Lab P1P/P1S 3D Printer
$36.99

Hotend Kit 0.4mm Hardened Steel Nozzle for Bambu Lab P1P and P1S Printers | Complete Assembly with Ceramic Heater, Thermistor, Silicone Cover, Wrench and Grease
$19.54

LEOWAY 4PCS 0.2/0.4/0.6/0.8mm Hotend Kit for Bambu Lab P2S/P2SC/X2D | All-in-one 4-nozzle set covers 0.2–0.8mm, enabling ultra-fine detail to high-speed thick-layer printing with one purchase
$39.94

LEOWAY All-Metal Extruder Gear Kit for P1P, P1S, X1C 3D Printers | Upgrade DLC Nano-Coated Hardened Steel, Self-Lubricating Brass Helical Extrusion Gear
$36.54

Bewinner Hotend Kit 0.2mm Hardened Steel Nozzle with 2510 Cooling Fan, Upgraded Extruder Hot End Assembly for Bambu Lab P1P P1S 3D Printer, High-Temperature Printing
$31.72

Wisoqu 5V Hotend Cooling Fan for Bambu Lab P1P P1S 3D Printers Accessories | 2510 Fan 25x25x10mm 18000r/min, PWM Temperature Control
$12.15