1 / 4PWS Autoparts Anti-Rattle Hitch Shim Kit, 3-Piece Stainless Steel
PWS Autoparts Anti-Rattle Hitch Shim Kit is a three-piece stainless steel shim set intended to take up play between a tow-bar receiver and a ball-mount shank. The listing says it suits hollow or solid shanks and can reduce hitch movement and noise, but the right fit depends on your receiver and shank.
At a glance
- Three shims are provided, with a right-angle shim and two flat shims in different thicknesses.
- The listing says the shims suit hollow or solid shank ball mounts.
- The manufacturer says to insert the required number of shims into the receiver opening to reduce excess play.
Pros and cons
Pros
- The three-piece set offers multiple shim shapes and thicknesses for adjusting fit.
- Stainless steel construction and a polished finish are specified.
Technical specifications
8 specifications| Brand | PWS Autoparts |
|---|---|
| Model | Autoparts |
| Vehicle service type | Car, RV, Truck, UTV, Van |
| Fit type | Vehicle Specific Fit |
| Material listed | Stainless Steel |
|---|---|
| Finish | Polished |
| Shim length | 100mm |
| Manufacturer warranty description | 2 Years Warranty |
|---|
What to know before buying
- Compatibility depends on the receiver and shank fit. The listing provides a 100mm shim length but no receiver or shank dimensions, so compare those before ordering.
What’s in the box
Included- 1 x 1mm right-angle shim with slotted pin hole
- 1 x 0.5mm flat shim with slotted pin hole
- 1 x 0.5mm flat shim
Who is it for?
A good fit for
- Tow-bar owners looking to take up play between a receiver and a ball-mount shank.
- Buyers whose setup can use the listed 100mm shims and the included 1mm or 0.5mm pieces.
Less suited to
- Buyers who need a confirmed fit for a specific receiver size, since no compatible dimensions are supplied.
Customer reviews on Amazon
- 5 stars
50% 50% - 4 stars
0% 0% - 3 stars
50% 50% - 2 stars
0% 0% - 1 star
0% 0%
The supplied aggregate rating is split between five-star and three-star ratings, with only a small number of ratings overall. That gives limited evidence about customer experience and does not establish why ratings differ. Buyers should weigh it alongside the listed shim shapes, thicknesses and fit limitations.
Frequently asked questions
What is included in the kit?
The listed contents are one 1mm right-angle shim with a slotted pin hole, one 0.5mm flat shim with a slotted pin hole, and one 0.5mm flat shim.
Will the shims fit my ball mount?
The listing says they suit hollow or solid shanks, but does not give receiver or shank dimensions. Check the 100mm shim length and your setup before buying.
What does the kit aim to do?
It is intended to take up excess play between the tow-bar receiver and tongue, which the manufacturer says can reduce movement and noise.
Alternative options
Duskie Anti Rattle Stainless Steel Shim for Truck, Van, RV - 4 Pack (2x1mm & 2x1.5mm)
$32.00
MaxxHaul 50023 Hitch Tightener Anti Rattle Stabilizer for 1.25" to 2" Hitches Reduce Movement On Hitch Mount Cargo Carrier Bike Rack
$29.95
CURT 22325 No-Tool Anti-Rattle Hitch Clamp Tightener for 2-Inch Receiver, Hollow or Solid Shanks
$41.99
Famiron Anti-Rattle Hitch Pin Shim Device, 2-Inch Receiver, 1/2-Inch Hole, Trailer Hitch Stabilizer
$25.75
LIANJINLIU 2" Anti-Rattle Hitch Clamp,Hitch Stabilizer Tightener | Corrosion-resistant heavy-duty anti-rattle 2" hitch tightener stabilizer clamp eliminates shaking for quiet noise-free towing
$37.99
Rubber Hitch Pad 3Pcs for 2 Inch Receivers, Trailer Rattle Dampener | Tool-Free Setup, Black Cushioning, Supports Towing and Boat Trailer Hauling, Helps Create Quieter Rides for Pickup Owners
$16.99
