Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

OVERTURE Rapid PETG Filament, 1.75 mm, 1 kg, Grass Green

OVERTURE Rapid PETG is a 1.75 mm, 1 kg Grass Green filament for FDM 3D printing. The listing claims support for printing speeds up to 300 mm/s, but its recommended range starts at 30 mm/s, so speed depends on printer and settings.

At a glance

  • PETG filament in the listed Grass Green colour, supplied as a 1 kg item.
  • The listing describes neat winding and suitability for multi-material systems, including AMS and MMU setups.
  • Manufacturer-listed print guidance gives nozzle temperatures of 230-260°C and bed temperatures of 65-70°C.
Price
$25.64Save 27%

Reference price: $34.99

Price checked: 18 Nov 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • The 1.75 mm diameter and PETG material are clearly specified for buyers matching filament to their printer.
  • The stated temperature ranges provide a starting point for printer setup.
  • A claimed accuracy of ± 0.02mm may suit parts where dimensional fit matters, subject to printer and material setup.

Cons

  • The listed 30-300mm/s speed range is broad, so the upper speed claim alone does not establish that a given printer can use it successfully.

Technical specifications

10 specifications
Identity
BrandOVERTURE
ModelVAB010009
Material and colour
MaterialPolyethylene Terephthalate Glycol
ColourGrass Green
Dimensions and weight
Filament diameter1.75 Millimeters
Weight listed1 Kilograms
Printing guidance
Recommended nozzle temperature230-260°C
Recommended bed temperature65-70°C
Recommended printing speed30-300mm/s
Claimed high-speed capabilityHigh Speed Printing Up to 300mm/s

What to know before buying

  • The listing presents up to 300mm/s as a high-speed capability and also gives a recommended range of 30-300mm/s. These are manufacturer claims, not verified results. Confirm compatibility with your printer and tune settings, as achievable speed and print quality depend on the setup. The listing also claims a 1-year shelf life for unopened spools when properly stored.

Who is it for?

A good fit for

  • FDM printer owners seeking 1.75 mm PETG in a single 1 kg Grass Green spool.
  • Makers printing functional parts who want the listing's claimed toughness and layer bonding, and can tune PETG settings.
  • Users of multi-material systems who want to assess a filament the listing describes as AMS and MMU friendly.

Less suited to

  • Buyers who need independently confirmed high-speed results, printer-specific profiles or guaranteed system compatibility.
  • Anyone whose printer does not accept 1.75 mm filament or cannot use PETG.
OVERTURE Rapid PETG Filament, 1.75 mm, 1 kg, Grass Green · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 209 ratings
  • 5 stars75%75%
  • 4 stars11%11%
  • 3 stars6%6%
  • 2 stars2%2%
  • 1 star6%6%

Aggregate customer ratings lean positive, with most ratings in the five-star category, but a smaller share are low ratings. There is no supplied written feedback to explain either response, so buyers should not treat the ratings as evidence of particular print results. The listing's diameter, material and temperature guidance are concrete details to compare with their own printer, while the claimed top speed remains unverified.

Frequently asked questions

What filament diameter and material does this listing specify?

It specifies PETG filament with a diameter of 1.75 Millimeters.

What printing temperatures are recommended?

The listing recommends a nozzle temperature of 230-260°C and a bed temperature of 65-70°C. Treat these as starting guidance and adjust for your printer and print.

Can it print at 300mm/s?

The listing claims printing up to 300mm/s and gives a recommended speed range of 30-300mm/s. It does not establish that every printer or print can reach the top of that range.

Is this filament confirmed to work with every AMS or MMU?

No. The listing describes it as AMS and MMU friendly, but does not confirm compatibility with every system. Check your printer or feeder requirements before buying.

OVERTURE Rapid PETG Filament, 1.75 mm, 1 kg, Grass Green · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.5
Nefelia 67XL Compatible Ink Cartridge 2-Pack
Nefelia 67XL Compatible Ink Cartridge 2-Pack

A$49.99

A$42.49

-15%
-15%
Product details in Markdown