Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

NEEWER TL253A+DS001 Table Camera Tripod and Two-Section Arm

Tripod: The NEEWER TL253A+DS001 combines an adjustable light stand with a horizontal two-section arm for desk-mounted cameras, webcams or lights. The stand supports up to 4 kg according to the listing, while the arm is specified for up to 0.9 kg, so match the device to the relevant mount before buying.

At a glance

  • Three-section stand adjusts in height, with a ball head and 1/4-inch screw for supported lights and cameras.
  • Two-section arm extends horizontally from the stand and has its own ball head and lower stated load limit.
  • C-clamp fits desk edges up to 9 cm thick and is described with rubber pads to protect the surface.
  • Includes a phone holder adjustable across the stated 64-105 mm range and two screw adapters.
Price
$55.99Save 30%

Reference price: $79.99

Price checked: 20 Nov 2026

View offerBlack Friday weekExplore the selection

Often bought together

Pros and cons

Pros

  • The stand and extension arm provide separate positioning options in one desk-mounted setup.
  • A stated 4 kg stand capacity accommodates heavier equipment than the arm's separate 0.9 kg limit.
  • The adjustable phone holder and screw adapters broaden the mounting options described in the listing.

Cons

  • The horizontal arm has a substantially lower stated load limit than the main stand, limiting what should be mounted on it.

Technical specifications

15 specifications
Identity
BrandNEEWER
ModelTL253A+DS001
Stand and arm
Stand sections3 sections
Stand extension24 inches to 47 inches (61 cm to 120 cm)
Stand load capacityup to 8.8 lb (4 kg)
Arm sections2 sections
Arm extension11.8 - 20 inches (30-51 cm)
Arm load capacityup to 2 lb (0.9 kg)
Stand ball head rotation360°
Mounting and fit
Desk thickness limitup to 3.5 inches (9 cm)
Phone holder adjustment range2.5 - 4 inches (64-105 mm)
Pole clamp compatibility22-28mm (08-1.1’’) diameter
Screw adapters1/4 inch to 3/8 inch and 1/4 inch to 5/8 inch
Dimensions and installation
Weight listed991 g
Package dimensions and weight61 x 13 x 2 cm; 992.23 Grams

What to know before buying

Listing details to confirm

The listing describes an arm capacity of up to 0.9 kg and stand capacity of up to 4 kg. Customers report both stable and wobbly experiences, so consider the mounted load and intended positioning rather than assuming every setup will feel equally steady.

Who is it for?

A good fit for

  • Desk-based video calls, streaming or online lessons with a webcam or light.
  • Overhead or close-up setups where adjustable stand height and a horizontal arm are useful.
  • Users who want to mount a compatible phone, camera or light on a clamped desk stand.

Less suited to

  • Setups that require the extension arm to support equipment heavier than its stated 0.9 kg limit.
  • Buyers needing a freestanding floor tripod, which this desk-clamp product is not described as providing.
NEEWER TL253A+DS001 Table Camera Tripod and Two-Section Arm · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 492 ratings
  • 5 stars76%76%
  • 4 stars12%12%
  • 3 stars5%5%
  • 2 stars1%1%
  • 1 star6%6%

Customer feedback commonly praises build quality, ease of setup, adjustability and versatility, with some users describing quick positioning through the ball heads. Stability reports are mixed, including both secure and wobbly setups. For buyers using this desk-mounted stand, that mixed feedback matters most when positioning equipment near the arm's 0.9 kg limit or using an extended reach. The positive overall rating distribution is encouraging but does not establish how the stand will perform in a particular setup.

Positive themes

  • Customers report that it is well-made and easy to set up.
  • Feedback highlights adjustability and versatility, including use with different device types.

Mixed feedback

  • Stability feedback is mixed, with reports of both steady support and wobbling.

Frequently asked questions

What is the difference between the stand and arm load limits?

The listing states up to 4 kg for the TL253A stand and up to 0.9 kg for the DS001 horizontal arm. Use the limit for the specific section carrying your equipment.

How far does the stand extend?

The three-section stand is specified to adjust from 24 inches to 47 inches (61 cm to 120 cm).

Will the clamp fit my desk?

The listing gives a maximum desk thickness of 3.5 inches (9 cm). Check your desk edge against this limit before purchase.

Can it hold a phone?

The included phone holder is described as adjustable between 2.5 and 4 inches (64-105 mm). Confirm your phone fits within that range.

NEEWER TL253A+DS001 Table Camera Tripod and Two-Section Arm · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.5
EMART EM-BS3036L 10 x 12 ft Adjustable Backdrop Stand Kit
EMART EM-BS3036L 10 x 12 ft Adjustable Backdrop Stand Kit

A$119.99

A$101.99

-15%
-15%
Product details in Markdown