1 / 7LONELY BINARY Electronics Starter Kit, 400+ Pieces
Pieces: The LONELY BINARY Electronics Starter Kit is a component assortment for breadboard prototyping with Arduino IDE and ESP32 projects. Its listed breadboard, jumper wires, sensors and varied components provide a starting point for circuit experiments, but the supplied list does not include a microcontroller board.
At a glance
- An 830-point breadboard and 120 jumper wires support solderless circuit layouts.
- The component list covers resistors, capacitors, LEDs, switching components, push buttons, potentiometers, and light and temperature sensors.
- The listed Type-C power supply module provides 3.3V/5V outputs.
- The listing describes compatibility with Arduino IDE and ESP32, and also names MicroPython, Raspberry Pi, and STM32 ecosystems.
Often bought together
Pros and cons
Pros
- Broad selection of basic parts for experimenting with input, output, and simple switching circuits.
- Breadboard and three jumper-wire configurations are listed, so basic prototyping connections are part of the kit.
- The power module’s stated 3.3V/5V outputs suit projects that need either listed voltage.
Technical specifications
3 specifications| Brand | LONELY BINARY |
|---|---|
| Model | Lonely Binary Electronics Component Kit |
| Wireless connection listed | Bluetooth |
|---|
What to know before buying
Listing details to confirm
The listing is inconsistent about quantities: it says 400+ pieces, elsewhere describes 238 essential components, and gives different sensor counts. It also lists four potentiometers in the contents but describes 60 potentiometers for use cases, gives conflicting potentiometer values, and says both one and two each of light sensors, temperature sensors, and RGB LEDs. The included ESP32, Arduino or other microcontroller board is unconfirmed. Confirm the selected listing’s itemised contents before relying on exact counts or board inclusion.
What’s in the box
- 1 × 830-point breadboardIncluded
- 1 × Type-C power supply module (3.3V/5V)Included
- 120 × jumper wires (40 each male-to-male, male-to-female, and female-to-female)Included
- 120 × resistors (20 each: 1K, 4.7K, 10K, 100R, 220R, 1M)Included
- 20 × monolithic capacitors (10 × 22pF, 10 × 100nF)Included
- 20 × electrolytic capacitors (10 × 10µF, 10 × 100µF)Included
- 5 × push buttons (12×12mm, assorted colours with caps)Included
- 4 × potentiometersCheck selected pack
- 5 × Schottky diodes (1N5819)Included
- 5 × NPN transistors (S8050)Included
- 5 × N-MOSFETs (2N7000)Included
- 50 × mixed-colour LEDs (red, blue, green, yellow, white)Included
- Light sensorsCheck selected pack
- Temperature sensorsCheck selected pack
- RGB LEDsCheck selected pack
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- Beginners learning breadboard circuit assembly and basic electronics.
- Makers who already have a compatible microcontroller and want assorted components for small sensor or LED projects.
- Classroom or workshop activities where a variety of basic circuit parts is useful.
Less suited to
- Buyers who need an ESP32 or Arduino board included in the kit.
- Projects requiring a confirmed exact quantity of sensors, RGB LEDs, or potentiometers.
- Anyone seeking a complete, guided microcontroller kit with a confirmed project curriculum.

Customer reviews on Amazon
- 5 stars
74% 74% - 4 stars
8% 8% - 3 stars
10% 10% - 2 stars
0% 0% - 1 star
8% 8%
Aggregate ratings lean positive, with most ratings in the five-star category, but a smaller low-star share means experiences are not uniformly positive. No customer comments or reasons for ratings are supplied, so this cannot establish which parts buyers liked or whether the kit’s listed contents matched their expectations. For buyers choosing it as a basic prototyping assortment, the unresolved quantities in the listing are more actionable than the rating alone.
Frequently asked questions
Does this kit include an ESP32 or Arduino board?
The supplied component list names a breadboard, power module, wires and electronic parts, but does not confirm that a microcontroller board is included.
What is included for breadboard prototyping?
The explicit contents list includes an 830-point breadboard, 120 jumper wires in three configurations, and a Type-C power supply module stated to provide 3.3V/5V.
Are the sensor and potentiometer quantities clear?
No. The listing gives inconsistent sensor counts, and its stated potentiometer counts and values do not agree. Check the selected listing if those parts are essential.
Which platforms does the listing name?
It describes use with Arduino IDE and ESP32 and also lists MicroPython, Raspberry Pi, and STM32 ecosystems. Compatibility for a particular project is not established by those general claims.

Alternative options

Basic Electronic Starter Kit for Arduino Breadboard Power Jumper Wires Resistors LED Power Supply Electronic Fun Kit Compatible with Arduino IDE UNO R3 Mega2560 Raspberry Pi
$19.99

Lonely Binary 3-Pack Solderless Breadboard Power Supply 3.3V 5V USB-C | 3.3V/5V slide switch, 500mA PPTC protection; USB-C 5V input; dual LED indicators; plugs into breadboard power rails
$19.99

Breadboard Kit with Power Supply for Electronics, 65 Pieces M/M Bread Jumper Wires(12/16/20/25cm), 1 Piece Power Supply Module MB 102(5V/3V), 1 Piece 830 Tie-Points Breadboard
$16.99

Breadboard Set Electronics Component Starter Kit for R3
$22.59

Freenove ESP32 Kit ESP32-S3 Camera Board Ultimate Starter Kit | 240 MHz 32-bit Dual-core, USB-OTG Camera WiFi+BT, Python C Java Code, 828-Page Tutorial, 121 Projects, 243 Items
$78.95

Lonely Binary Logic Analyzer Kit, 8 Channel 24MHz USB with Breakout Boards
$29.99

ELEGOO 37-in-1 Sensor Modules Kit with Tutorial Compatible with Arduino | Upgraded Parts, Suitable for UNO R3 MEGA Nano, 100% Compatible with Arduino IDE and STM32, Most Commonly Used Modules
$38.24

ELEGOO UNO R3 Project Most Complete Starter Kit, Compatible with Arduino | 63 Items, 200+ Components, 30+ Guided Projects, PDF Tutorial, Organized Storage, STEM and DIY Circuit Building
$60.79

Lonely Binary ESP32 WROOM-32UE IPEX + PinPulse Shield for Arduino IDE | External 2.4GHz antenna, extended range; dual M/F headers; per-GPIO LED indicators; FPC display port; MicroPython, ESP-IDF
$34.99

Lonely Binary 6-Pack SPI TFT LCD Display Kit 0.96"-3.5" for 3.3V MCUs | 9 no-solder FPC cables, pin headers & case; color screens for ESP32, Raspberry Pi Pico & STM32; Tutorials included
$90.00

Lonely Binary 27pcs Logic Level Converter Kit – Lead-Free Bi-Directional Voltage Shifters (2CH, 4CH, 6CH) Gold Edition
$19.99

Lonely Binary 12-Pack USB-C PD Trigger 100W Decoy DIP 5-20V Screw Terminal | PD 3.0/QC, fixed 5V/9V/12V/15V/20V via DIP switch; screw terminals; breadboard pins; for ESP32; laptop, router, LED
$29.99

