1 / 7Lonely Binary 6-Pack DHT22 and DHT11 Temperature and Humidity Sensors
Sensors: The Lonely Binary DHT22 and DHT11 sensor pack combines three of each sensor for microcontroller-based temperature and humidity projects. Its mixed sensor types can suit projects needing both broader-range DHT22 readings and basic DHT11 monitoring, but the listing does not provide one consistent specification set for every model.
At a glance
- Mixed set of three DHT22 and three DHT11 sensors, intended for different levels of environmental monitoring.
- Single-wire digital interface and stated 3.3V to 5V compatibility, with a separate listing claim of up to 6V for DHT22.
- The listing describes use with microcontroller projects including ESP32, ESP8266 and STM32.
Often bought together
Pros and cons
Pros
- Six sensors across two types provide options for basic monitoring and projects with broader stated measurement ranges.
- Digital single-wire output is suited to wired microcontroller prototypes and environmental monitoring projects.
Technical specifications
7 specifications| Brand | LONELY BINARY |
|---|---|
| Model | 6-PACK (3 DHT11 + 3 DHT22) |
| Sensor technology | Digital |
|---|---|
| Wireless connection listed | Wired |
| Display listed | no display |
| Power configuration | Powered By Connected Microcontroller |
|---|
| Weight listed | 0.05 Kilograms |
|---|
What to know before buying
Listing details to confirm
The listing’s temperature accuracy details are inconsistent: one field gives 0.5 °c and another encodes plus_minus_0_point_5_degrees_celsius, while feature text assigns ±0.5°C/±2% accuracy to DHT22 and ±2°C/±5% to DHT11. It also gives a general 80 Degrees Celsius upper range but model-specific ranges of -40°C to 80°C for DHT22 and 0–50°C for DHT11. Confirm which model-specific readings apply to your project. The stated voltage range is also phrased as 3.3V–5V generally and up to 6V for DHT22.
What’s in the box
- 3 Lonely Binary DHT22 Gold Edition sensorsIncluded
- 3 Lonely Binary DHT11 Gold Edition sensorsIncluded
- 1 storage containerCheck selected pack
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- Makers building wired temperature and humidity projects with a microcontroller.
- STEM learning and prototyping where having both basic and broader-range sensor types is useful.
- Projects that can use the stated single-wire digital interface and verify sensor-specific operating requirements.
Less suited to
- Buyers wanting a standalone display or wireless sensor system.
- Applications that require a single unambiguous accuracy specification without checking which sensor model is being used.

Customer reviews on Amazon
- 5 stars
75% 75% - 4 stars
17% 17% - 3 stars
0% 0% - 2 stars
8% 8% - 1 star
0% 0%
Aggregate ratings lean positive, with most ratings in the five-star category, but a smaller two-star share means the overall figure should not be treated as uniform satisfaction. No review themes are supplied, so the ratings do not establish specific strengths or problems. For buyers, the listing’s model-specific specification inconsistencies remain important to resolve before relying on either sensor for a measurement requirement.
Frequently asked questions
What sensors are in the pack?
The listed kit contains three DHT22 sensors and three DHT11 sensors.
Are the DHT22 and DHT11 specifications the same?
No. The listing gives different model-specific temperature and humidity ranges and accuracy claims. Check the notes and confirm the relevant figures for your intended use.
How do the sensors connect and receive power?
The listing describes a wired, single-wire digital interface and power from a connected microcontroller. It states 3.3V to 5V compatibility, with a separate claim of up to 6V for DHT22.
Does the kit include a storage container?
The detailed product description and box list mention one storage container, but the included-components field lists only the six sensors. Check the selected listing to confirm whether the container is included.

Alternative options

DIGISHUO 2Pcs DHT22/AM2302 Digital Temperature and Humidity Sensor Module | Temperature Humidity Monitor Sensor | Replace SHT11 SHT15 for Arduino Electronic Practice DIY
$10.58

Lonely Binary ESP32-S3 N16R8 Dev Board + 2.54mm Base for Arduino IDE | 16MB Flash, 8MB PSRAM, 240MHz; WiFi + BT 5.0 LE; dual USB-C 5V, VIN 5-12V; 2.54mm GPIO breakout, male/female; MicroPython
$28.99

Lonely Binary 46-in-1 Sensor Kit for ESP32, Raspberry Pi Pico and STM32 | TFT LCD, 8x8 LED matrix, 7-seg clock, joystick, encoder, IR, EEPROM + 39 more; no solder, labeled; tutorials; I2C/SPI/PWM
$89.99

Lonely Binary 3-Pack ESP32 WiFi BT + 3 Expansion Bases for Arduino IDE | WS2812 RGB LED on GPIO2; 3 bases: 2.54mm GPIO, screw & non-screw terminal; USB-C, pre-soldered, no solder; cable + case
$39.99

ELEGOO 3PCS ESP-WROOM-32 Development Board USB-C, 2.4GHz Dual Mode WiFi+Bluetooth Dual Core Microcontroller for Arduino IDE, Support Arduino, MicroPython, NodeMCU, AP/STA/AP+STA, CP2102 Serial Chip
$30.59

Lonely Binary 27pcs Logic Level Converter Kit – Lead-Free Bi-Directional Voltage Shifters (2CH, 4CH, 6CH) Gold Edition
$19.99

Lonely Binary 6-Pack SPI TFT LCD Display Kit 0.96"-3.5" for 3.3V MCUs | 9 no-solder FPC cables, pin headers & case; color screens for ESP32, Raspberry Pi Pico & STM32; Tutorials included
$90.00

Lonely Binary UNO R3 ATmega328P Board USB-C Sakura Pink | Works with Arduino IDE; Immersion Silver finish; 16MHz, 32KB Flash; pre-soldered, 14 I/O + 6 analog
$15.99

Lonely Binary TinkerBlock ESP32-S3 Starter Kit, 12 Sensors, for Arduino IDE | Dual USB-C Ports, WiFi and Bluetooth LE, works with Arduino IDE, MicroPython, ESP-IDF, IoT and Smart Home Projects
$44.99

Lonely Binary 6-Pack TM1637 4-Digit Clock Display for ESP32 & Arduino IDE | 6colors: yellow, green, blue, white, orange, red; central colon (HH:MM), no decimal; 2-pin DIO/CLK; 3D cases + film; for Pico
$29.99

Lonely Binary 12-Pack USB-C PD Trigger 100W Decoy DIP 5-20V Screw Terminal | PD 3.0/QC, fixed 5V/9V/12V/15V/20V via DIP switch; screw terminals; breadboard pins; for ESP32; laptop, router, LED
$29.99

Lonely Binary ESP32 WROOM-32UE IPEX + PinPulse Shield for Arduino IDE | External 2.4GHz antenna, extended range; dual M/F headers; per-GPIO LED indicators; FPC display port; MicroPython, ESP-IDF
$34.99
