Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Lokkr SpacePi X4 Filament Dryer, 4 Spools

Spools: Lokkr SpacePi X4 is a four-spool filament dryer listing two independently controlled heating chambers and a maximum temperature of up to 85°C. Its claimed capacity and broad filament compatibility may suit multi-material printing, but the listing contains conflicting power and voltage details to clarify before purchase.

At a glance

  • The listing claims room for four spools and simultaneous drying and printing.
  • Two chambers are described as independently operated, allowing different temperature settings for different filament types.
  • Active dehumidification and desiccant regeneration are claimed for filament storage.
  • The stated supported spool limit is 200mm in diameter and 150mm in width.
Price
$228.65Save 15%

Reference price: $269.00

Price checked: 18 Nov 2026

View offer

Pros and cons

Pros

  • Four-spool capacity can reduce the need to swap spools during multi-material or multi-colour workflows.
  • Independent chambers offer flexibility when drying different filament types.
  • The listed material range includes PLA, PETG, ABS, TPU, PC, PA and PAHT.

Cons

  • The listed weight is 6.5 kilograms, so this is not a lightweight option to move around frequently.

Technical specifications

16 specifications
Identity
BrandLokkr
Listed modelSpacePi X4 Filament Dryer
Capacity and compatibility
Spool diameter200 Millimeters
Listed filament materialsPLA, PETG, ABS, TPU, PC, PA, PAHT
Supported filament diameters1.75mm/2.85mm
Supported spool dimensions≤200mm diameter, ≤150mm width
Spool size compatibility1kg/2kg spools
Heating and operation
Heating chamberstwo 200W PTC heating chambers
Maximum temperatureup to 85°C
Drying timeAdjustable (1-48 hours)
Power and dimensions
Power listed in description360W
Voltage listed in description220-240V or 100-120V, depending on region
Product dimensions listed382290270mm
Weight listed6.5 Kilograms
Materials and protection
Housing claimUL 94 V-0 flame-retardant housing
Safety features claimedoverheat, short-circuit, and dry-burn prevention

What to know before buying

Listing details to confirm

Listing details are inconsistent or unconfirmed: it says two 200W heaters but lists 360W total power, gives multiple region-dependent voltage ranges without confirming the version supplied in Australia, and the listed dimensions lack separators or units. Confirm the selected model's power, voltage and dimensions before buying. The 85°C maximum and other performance and safety details are manufacturer claims, not independently verified here.

What’s in the box

Included
  • SpacePi X4 Filament Dryer

Who is it for?

A good fit for

  • 3D printer users who want to dry and feed up to four spools at once.
  • Users working with multiple listed filament types who want separately operated heating chambers.
  • Buyers whose spools fit the stated maximum dimensions and who can confirm the local electrical configuration.

Less suited to

  • Anyone who needs independently confirmed power, voltage or precise dimensions before purchase.
  • Users who only need capacity for one or two spools.
Lokkr SpacePi X4 Filament Dryer, 4 Spools · photo 2
Additional product photo 2

Customer reviews on Amazon

4.8 / 5 · 14 ratings
  • 5 stars90%90%
  • 4 stars0%0%
  • 3 stars10%10%
  • 2 stars0%0%
  • 1 star0%0%

Aggregate ratings lean strongly positive, with most recorded ratings in the five-star category and a smaller three-star portion. With no written feedback supplied, the ratings do not show what customers liked or criticised. Treat them as limited context rather than evidence of drying performance, particularly if you need the four-spool capacity or maximum temperature for a specific workflow.

Frequently asked questions

How many spools can the SpacePi X4 hold?

The listing claims capacity for four spools and says it can dry and print from four simultaneously. It also lists support for 1kg and 2kg spools within the stated size limits.

Which filaments does it support?

The listing names PLA, PETG, ABS, TPU, PC, PA and PAHT, and states support for 1.75mm and 2.85mm filament.

What should I check about the power supply?

The description lists two 200W heaters and 360W total power, while giving voltage ranges of 220-240V or 100-120V depending on region. Confirm the supplied Australian version's power and voltage before purchase.

Lokkr SpacePi X4 Filament Dryer, 4 Spools · photo 3
Additional product photo 3

Alternative options

Product details in Markdown