Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Lokkr CR-10 Tempered Glass 3D Printer Bed, 310 × 310 × 4 mm

Lokkr Glass Bed is a tempered-glass build surface listed for selected Creality CR-10-series printers. Its 310 mm square plate is designed to sit on an existing heated bed and be held with clips, but the listing warns it may be shorter than the beds on some compatible models.

At a glance

  • Can be placed over an existing hotbed and secured with clips, according to the listing.
  • The manufacturer says prints may release by hand after the hotbed cools to room temperature.
  • The listing provides suggested hotbed temperatures for several filament types.
Price
$28.00Save 15%

Reference price: $32.99

Price checked: 18 Nov 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • The plate is listed for several CR-10 family models, including CR-10S and CR-X.
  • Clip mounting allows placement over an existing hotbed without replacing it, according to the product description.
  • The supplied instructions describe cleaning with water or alcohol.

Cons

  • The stated 310 mm square size may be short for CR-10S and CR-10 V2 beds, which the description says measure 310 mm by 320 mm.

Technical specifications

9 specifications
Identity
BrandLokkr
ModelGlass Bed
Materials and protection
Material listedTempered Glass
ColourBlack
Fit and dimensions
Listed size310mm x 310mm x 4mm
Compatible devicesCR-10, CR-10S, CR-10 V2, CR-10 S3, CR-X
Other listed details
Operating SystemWindows, macOS, Linux
Connector TypeUSB
Batteries IncludedNo

What to know before buying

Listing details to confirm

Listing details are inconsistent or unconfirmed: the title calls the product an official Creality plate while the brand and manufacturer fields say Lokkr. The description says CR-10S and CR-10 V2 beds are 310 mm x 320 mm and that this plate may be short, despite listing those models as compatible. Dimension formats and weight entries also conflict, and the dimensions, weight and USB connector details are not reconciled with the glass-bed description. Confirm the selected listing and your bed size before buying. The suggested temperatures are manufacturer guidance, not guarantees of adhesion or release.

Who is it for?

A good fit for

  • CR-10-series owners looking for a clip-mounted glass build surface who have confirmed the plate dimensions suit their heated bed.
  • Buyers who want a surface that the listing says can be cleaned with water or alcohol.

Less suited to

  • Owners who need a confirmed full-width 310 mm by 320 mm plate for a CR-10S or CR-10 V2.
  • Buyers seeking a verified official Creality-branded product, since the page's title and brand information disagree.
Lokkr CR-10 Tempered Glass 3D Printer Bed, 310 × 310 × 4 mm · photo 2
Additional product photo 2

Customer reviews on Amazon

4.3 / 5 · 42 ratings
  • 5 stars66%66%
  • 4 stars20%20%
  • 3 stars0%0%
  • 2 stars8%8%
  • 1 star6%6%

Customer feedback highlights positive perceptions of performance and print quality, while adhesion feedback is mixed, with reports of both good adhesion and parts not sticking. That variability matters for buyers relying on consistent first-layer grip. The listing's clip-mounted glass surface and suggested filament temperatures describe intended use, but do not guarantee a particular print result.

Positive themes

  • Customer feedback describes performance positively.
  • Customer feedback describes print quality positively.

Mixed feedback

  • Adhesion feedback is mixed, with some customers reporting good adhesion and others saying parts do not stick properly.

Frequently asked questions

Will this glass bed fit a CR-10S or CR-10 V2?

The listing names both as compatible, but also says their beds measure 310 mm x 320 mm and that this 310 mm square plate may be slightly short. Check your printer's bed dimensions before ordering.

How is the plate attached?

The description says it sits on top of an existing hotbed and is held in place with clips. The package list names four binder clips and one removal tool.

How does print removal work?

The listing says the bed should be allowed to cool to room temperature, after which the print may release by hand. It also mentions using a scraper, so release may depend on the print.

Lokkr CR-10 Tempered Glass 3D Printer Bed, 310 × 310 × 4 mm · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.4
Zoyood LC436XL Compatible Ink Cartridges, 4-Pack
Zoyood LC436XL Compatible Ink Cartridges, 4-Pack

A$37.99

A$28.49

-25%
-25%
Product details in Markdown