1 / 3Kludi 7480500-00 Low-Pressure Mixing Valve Cartridge, 35 mm
Kludi 7480500-00 is listed as a 35 mm cartridge for a low-pressure single-nozzle mixing valve. The supplied product information also describes it as a temperature control unit for spare parts 35100 and 35101, so confirm the part number against your existing valve before ordering.
At a glance
- Described as a temperature control unit spare part for 35100 and 35101 NeutralControl units.
- Listing title specifies a 35 mm cartridge for a low-pressure mixing valve.
- Operating guidance recommends 3-5 bar and a maximum hot-water inlet temperature of 65 degree C to save energy.
Reference price: $53.70
Price checked: 18 Nov 2026
View offerAhead of Black FridayExplore the selectionOften bought together
Pros and cons
Pros
- The listing identifies specific spare-part references, which can help when matching a replacement to an existing valve.
- Operating pressure and hot-water guidance are provided for installation planning.
Technical specifications
9 specifications| Brand | Kludi |
|---|
| Dimensions listed | 6.81 x 4.7 x 4.8 cm; 51 Grams |
|---|---|
| Weight listed | 51 g |
| Recommended operating pressure | 3-5 bar |
|---|---|
| Maximum operating pressure | 10 bar |
| Maximum test pressure | 25 bar |
| Maximum operating temperature | 90°C |
| Recommended maximum hot-water inlet temperature | 65 degree C |
| Diameter | 23 |
What to know before buying
Listing details to confirm
The listing is inconsistent about dimensions: the title says 35 mm, while the product description gives a diameter of 23 mm without stating its unit. It also describes this as a spare temperature-control unit for 35100 and 35101, while the title calls it a cartridge for a single-nozzle mixing valve. Confirm the required part and measurement with your valve documentation before buying. The description says that above 5 bar a pressure regulator must be installed to keep noise level DIN 4109, and recommends an operating pressure of 3-5 bar. It also recommends a maximum hot-water inlet temperature of 65 degree C to save energy, although the stated maximum operating temperature is 90°C.
Who is it for?
A good fit for
- People replacing a Kludi temperature control unit who can match the 35100 or 35101 spare-part reference.
- Buyers who can verify the valve type and required cartridge dimensions before ordering.
Less suited to
- Buyers who need a confirmed fit without checking the valve model and the listing's conflicting dimensional details.

Customer reviews on Amazon
- 5 stars
74% 74% - 4 stars
18% 18% - 3 stars
5% 5% - 2 stars
2% 2% - 1 star
1% 1%
Aggregate ratings lean positive, with most ratings in the five-star category and a smaller range of lower ratings. No written feedback is supplied, so the ratings do not establish fit, durability or the reason for individual scores. For a replacement part, matching the valve reference and resolving the listing's dimensional inconsistency matter more than the overall rating.
Frequently asked questions
Which valve parts is this unit listed for?
The product description calls it a temperature control unit spare part for 35100 and 35101 NeutralControl units. Check that reference against your existing valve.
Is the cartridge dimension confirmed?
No. The title specifies 35 mm, but the description lists a diameter of 23 without a unit. Confirm the required measurement before ordering.
What operating conditions does the listing recommend?
It recommends 3-5 bar operating pressure and a maximum hot-water inlet temperature of 65 degree C to save energy. Above 5 bar, it says a pressure regulator must be installed to keep noise level DIN 4109.



























