Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

JicoDirect 45-Degree Pergola Support Brackets, 4-Pack

Support Pack: JicoDirect pergola brackets are a four-piece set of 45-degree steel braces for DIY timber structures. The listing specifies 90 x 90 mm timber, while its installation guidance also gives a minimum mounting-side width of 80 mm, so check your timber dimensions before buying.

At a glance

  • Four 45-degree brackets and 34 screws are claimed for bracing timber posts and beams.
  • The listing specifies a 2 mm steel plate with a matte black powder coating.
  • Pre-drilled holes and direct-to-timber fitting are described as avoiding timber notching.
  • The listing suggests use on pergolas, gazebos, decks, carports, awnings and other wooden structures.
Price
$63.74Save 15%

Reference price: $74.99

Price checked: 19 Nov 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • The stated four-bracket set includes 34 screws, providing hardware for a DIY frame assembly.
  • The described pre-drilled design is intended for direct mounting without cutting or notching timber.
  • The 45-degree brace form is suited to adding diagonal support between timber beams and posts.

Technical specifications

9 specifications
Identity
BrandJicoDirect
Dimensions and installation
Dimensions listed43 x 5 x 8 cm; 2.8 kg
Weight listed2.8 kg
Bracket angle45 degree
Quantity of brackets4 Pcs
Included screws34 screws
Stated timber size90x90mm (4"x4")
Materials and finish
Steel plate thickness2 mm thick steel plate
Finishmatte black powder coating

What to know before buying

  • The listing describes the set as suitable for 90 x 90 mm timber, but also says the mounting side must be at least 80 mm wide. Confirm the fit for your timber and project, and do not treat the listing's structural or weather-resistance claims as verified load or safety ratings.

Who is it for?

A good fit for

  • DIY builders adding diagonal bracing to timber pergolas, gazebos, decks or carports.
  • Buyers whose timber mounting faces meet the stated minimum width and intended fit.

Less suited to

  • Projects needing a published load rating, engineering certification or verified wind-resistance specification.
  • Timber mounting faces narrower than the stated 80 mm minimum.
JicoDirect 45-Degree Pergola Support Brackets, 4-Pack · photo 2
Additional product photo 2

Customer reviews on Amazon

5 / 5 · 2 ratings
  • 5 stars100%100%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

Only aggregate ratings are available, with a very small rating sample that is entirely five-star. This offers little evidence about long-term performance, fit across timber sizes or structural capacity, so assess those needs using the stated dimensions and seek project-specific guidance where appropriate.

Frequently asked questions

How many brackets and screws does the listing claim are included?

It describes four 45-degree brackets and 34 screws.

What timber size are these brackets intended for?

The listing says they suit 90 x 90 mm timber and gives a minimum mounting-side width of 80 mm. Check that your timber and bracket fit before installation.

Does installation require cutting or notching timber?

The listing describes direct mounting through pre-drilled holes and says notching is unnecessary. It recommends marking and pre-drilling the timber.

Are the brackets rated for a particular structural load or wind speed?

No load rating or wind-speed figure is supplied, so the listing's strength claims do not establish project suitability. Seek appropriate structural advice where needed.

JicoDirect 45-Degree Pergola Support Brackets, 4-Pack · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.6
MightyPhine 5D 12-Inch Ground Anchors, Set of 4
MightyPhine 5D 12-Inch Ground Anchors, Set of 4

A$69.94

A$51

-27%
-27%
Product details in Markdown