Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Jiawu TPU 95A 1.75 mm Transparent 3D Printer Filament

Jiawu TPU filament is a transparent, flexible 1.75 mm material listed for FDM 3D printers. Its claimed 95A hardness and high-speed positioning may suit flexible parts, while the listing gives recommended nozzle and bed temperatures rather than a printing-speed range.

At a glance

  • Flexible TPU is marketed for parts such as straps, gaskets, protective casings and phone cases.
  • Transparent appearance is intended for clear-looking printed designs.
  • Listing claims a diameter tolerance of ±0.02 mm and mechanical winding.
  • Recommended nozzle temperature is 200°C to 230°C and recommended build plate temperature is 60 °C to 80 °C.
Price
$25.01Save 16%

Reference price: $29.60

Price checked: 18 Nov 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • Transparent TPU offers a flexible-material option for protective parts and other designs where a clear appearance is desired.
  • The listed diameter tolerance and recommended temperature ranges give useful starting points for printer setup.

Cons

  • The listing provides no specific printing-speed range despite positioning the filament as high-speed.

Technical specifications

7 specifications
Identity
BrandJiawu
Material and appearance
Material listedThermoplastic Polyurethane
ColourTransparent
Hardness95A
Filament dimensions
Diameter1.75 Millimeters
Printing settings
Recommended nozzle temperature200°C to 230°C
Recommended build plate temperature60 °C to 80 °C

What to know before buying

Listing details to confirm

The title identifies the filament as 95A, but the technical description leaves its hardness field blank. The listing also alternates between a claimed exact 1.75 mm diameter and an approximate diameter, and its title's dimensional-accuracy wording is misspelled. Treat the figures and performance claims as listing specifications rather than independently verified results. Confirm printer compatibility and tune settings for your setup.

Who is it for?

A good fit for

  • FDM printer owners seeking transparent TPU for flexible designs such as straps, seals or protective casings.
  • Buyers whose printer supports 1.75 mm filament and can use the listed temperature ranges.

Less suited to

  • Those who need a stated maximum printing speed, a clearly documented hardness specification, or evidence of measured print performance.
Jiawu TPU 95A 1.75 mm Transparent 3D Printer Filament · photo 2
Additional product photo 2

Customer reviews on Amazon

5 / 5 · 1 ratings
  • 5 stars100%100%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

Only a single five-star rating is reported, with no written feedback supplied. That is too limited to identify customer-reported strengths or concerns, and it does not establish how the filament prints. For buyers considering flexible transparent TPU, the listed material and settings are more useful than this sparse rating evidence.

Frequently asked questions

What printer type is this filament listed for?

The listing says it is suitable for most FDM 3D printers. Check that your printer takes 1.75 mm filament and supports the stated temperature ranges.

What temperatures does the listing recommend?

It lists a nozzle temperature of 200°C to 230°C and a build plate temperature of 60 °C to 80 °C.

Is the filament specified as 95A?

The title says 95A, but the technical description leaves the hardness field blank. Confirm the specification with the selected listing if hardness is important.

Does the listing state a printing speed?

No numerical speed range is supplied, so the high-speed positioning alone does not establish a particular supported print speed.

Jiawu TPU 95A 1.75 mm Transparent 3D Printer Filament · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.4
Zoyood LC436XL Compatible Ink Cartridges, 4-Pack
Zoyood LC436XL Compatible Ink Cartridges, 4-Pack

A$37.99

A$28.49

-25%
-25%
Product details in Markdown