1 / 7Jiawu Kobra 3 Hotend Kit, 0.4 mm Hardened Steel Nozzle
Jiawu’s Kobra 3 hotend kit is a replacement assembly listed for the Kobra 3 and Kobra 3 Combo. Its ceramic heater and hardened steel nozzle are claimed to reach 400℃, while the listing also claims support for print speeds up to 600mm/s.
At a glance
- Modular assembly with an integrated terminal connector, described as a direct-install replacement.
- Listing specifies a 0.4mm hardened steel nozzle and 1.75mm filament.
- A ceramic heating case is claimed to heat the nozzle to 400℃, with speed support claimed up to 600mm/s.
Pros and cons
Pros
- The listing names both Kobra 3 and Kobra 3 Combo as compatible models.
- The integrated connector and assembled design may simplify replacing a damaged hotend compared with sourcing separate parts.
- The stated range of filament types includes common materials such as PLA, PETG and ABS as well as higher-temperature options.
Technical specifications
11 specifications| Brand | Jiawu |
|---|---|
| Product type | Upgrade Hotend Kit |
| Compatible models | For Kobra 3, for Kobra 3 Combo |
| Nozzle diameter and material | 0.4mm Nozzle Material: Hardened Steel |
|---|---|
| Filament diameter | 1.75mm |
| Supported filaments | PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI, etc. |
| Claimed maximum temperature | 400℃ |
|---|---|
| Claimed print speed | 600mm/s |
| Heatbreak material | CrZr Copper, Ti Alloy |
| Weight listed | 60 g |
|---|
| Material listed | Metal |
|---|
What to know before buying
- The 400℃ temperature and 600mm/s speed are manufacturer claims, not independently verified performance figures. Confirm that your printer, firmware and filament settings suit the intended operating conditions before relying on them.
Who is it for?
A good fit for
- Kobra 3 or Kobra 3 Combo owners seeking a replacement hotend assembly.
- Users whose printer setup calls for a 0.4mm hardened steel nozzle and 1.75mm filament.
Less suited to
- Owners of printer models other than the listed Kobra 3 and Kobra 3 Combo, unless compatibility is confirmed.

Customer reviews on Amazon
- 5 stars
72% 72% - 4 stars
0% 0% - 3 stars
28% 28% - 2 stars
0% 0% - 1 star
0% 0%
The supplied evidence contains aggregate ratings only, with a small sample and a split between five-star and three-star ratings. That offers limited guidance about fit, installation or real-world heating and speed performance, so buyers should base compatibility decisions on the listed printer models and treat performance figures as claims.
Frequently asked questions
Which printers is this hotend listed for?
The listing names the Anycubic Kobra 3 and Kobra 3 Combo. Confirm the model and fit before ordering.
What nozzle and filament size are specified?
The specifications list a 0.4mm hardened steel nozzle and 1.75mm filament.
Does it support 400℃ and 600mm/s?
Those figures are listing claims. They are not independently verified, and actual suitability depends on the printer, firmware, filament and operating settings.

Alternative options

Heating Block Ceramic Hotend Upgrade Kit for Kobra 3, for Kobra 3 Combo, Hardened Steel Nozzle Hotend Kit, 3D Printers Ceramic Heating Block, Heatbreak Hot End Replacement
$19.03

3D Printer Hot End Kit, Upgrade Ceramic Hotend Kit 0.4mm Hardened Steel Nozzle, Assembled Hotend Kit 3D Printer Replacement Parts for Kobra 3 Printer, for Kobra 3 Combo
$22.77

YUYUEMI Kobra 3 Hotend Upgrade Set for Anycubic Kobra 3 Print Head Extruder Kit with 0.4mm Hardened Steel Nozzles 24v 60w High Speed 3D Printer
$24.85

VGOL 3D Printer Extruder Hot End Kit Hotend/Printhead 0.4mm Brass Nozzle 100K Thermistor Heater Cartridge Heat Block Silicone Sleeve Compatible with Anycubic Compatible with Kobra 3
$23.09

for Kobra 3 Printer Hotend Heater Block Kit,Silicone Sock Brass Hardened Steel Nozzle 0.4mm,Heating Rod Thermistor High Flow Hot End Kit for Anycubic Kobra 3 3D Printer (Brass Without Radiator)
$17.00

YUYUEMI Kobra S1 Hotend for Anycubic Kobra S1/S1 Combo Hot End Kit 24V 48W High-Speed Extruder Print Head Upgrade Kobra S1 Hotend Kit
$46.36

Pyhodi Upgrade Hotend Kit, Ceramic Heater 0.4mm Hardened Steel Nozzle Aluminum Heatsink Hot End Kit for Kobra 3 Combo/ 3 V2 Combo
$29.43

Creality Official Ender 3 V3 SE/KE Hotend Upgrades Kit, 3D Printers Ceramic Heating Block with Quick-Swap Nozzle, Supports 300°C High Temperature, 600mm/s High-Speed for Ender 3 V3 SE/Ender 3 V3 KE
$56.99

ASHATA 3D Printer Build Plate for Kobra S1, PEI S1 Combo Build Plate, PEI Print Bed Platform Spring Steel Flexible Sheet for, 3D Printer PEY Star PEO Gradient Double
$20.99

Creality Upgraded Ender 3 Hotend Kit 3D Printer Assembled Extruder MK8 Kits 24V 40W for Creality Ender 3S/Pro/V2, Comes with 0.4mm Nozzle + PC4-M6 Fittings + PC4-M10 Fittings 3D Printer Accessories
$22.90

Xlihdzum 10-Pack Brass Extruder Nozzles for Ender 3 V3 SE | High Speed Brass Nozzle 3D Printer Accessories Kit Brass Nozzles Set 8x0.4mm + 2x0.6mm for Extruder Nozzle Accessories
$20.99

Creality Upgraded Sprite Extruder SE NEO Kit, Direct Drive Extruder, Upgrade Dual Gear Feeding Design for Ender-3 V2 Neo/Ender-3 Neo/Ender-3 Max Neo/Ender-2 Pro
$42.32