Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Jiawu 80 mm PWM Case Fan, 800–2500 RPM

Jiawu’s 80 mm PWM case fan is a compact cooling option with a 4-pin connector and a listing-claimed speed range of 800–2500 RPM. Its small listed dimensions and variable speed suit buyers replacing a matching case fan, but confirm chassis clearance and header compatibility before purchase.

At a glance

  • 4-pin PWM connection is described for a SYS_FAN header, with speed control claimed across 800–2500 RPM.
  • Listed airflow is 26.5 CFM at the stated top speed of 2500 RPM.
  • The listing claims a maximum noise level of 25.5 dBA and eight silicone vibration pads.
  • Listing describes seven fan blades and gives a 72 mm hole spacing.
Price
$17.68Save 15%

Reference price: $20.80

Price checked: 18 Nov 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • PWM speed control gives compatible systems a means to vary fan speed rather than run at one fixed speed.
  • The stated 80 mm-class dimensions and 72 mm hole spacing help buyers compare against a chassis mount.

Technical specifications

14 specifications
Identity
BrandJiawu
ModelJiawu0ngmcqiwep-12
Dimensions and installation
Dimensions listed8L x 8W x 2.5H centimetres
Connector4-Pin
Listed hole spacing72MM
Cooling and operating claims
Cooling methodforced air
Speed range800-2500RPM±10%
Maximum rotational speed2500 RPM
Airflow26.5 Cubic Feet Per Minute
Noise level25.5 Decibels
Rated voltage12V
Rated current0.16±0.02A
Bearing typeMFDB
MaterialSilicone

What to know before buying

Listing details to confirm

The listing gives the dimensions as 8L x 8W x 2.5H centimetres, while its description also states approximately 80x80x25mm. It describes the bearing as MFDB dynamic pressure and also uses hydraulic and magnetic-levitation terminology. Confirm the actual dimensions and bearing specification if either is critical. Speed tolerance is given as ±10% in the detailed specification, while the title gives a range without that tolerance. Noise and airflow figures are listing claims, not independent measurements.

Who is it for?

A good fit for

  • Replacing a case fan where an 80 mm size, 72 mm hole spacing and 4-pin PWM header are confirmed.
  • Buyers seeking a compact fan with an adjustable listed speed range.

Less suited to

  • Systems requiring a fan larger than the listed 80 mm dimensions or a connector other than 4-pin PWM.
  • Buyers who need independently verified acoustic or airflow performance.
Jiawu 80 mm PWM Case Fan, 800–2500 RPM · photo 2
Additional product photo 2

Customer reviews on Amazon

5 / 5 · 3 ratings
  • 5 stars100%100%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

Only aggregate ratings are supplied, with all recorded ratings in the five-star category. The small sample offers limited evidence about consistency and contains no customer comments, so it cannot establish noise, airflow or longevity in actual use.

Frequently asked questions

What connector does this fan use?

The listing specifies a 4-pin connector and says it can be connected to a SYS_FAN header. Check that your motherboard or controller has a compatible header.

What speed and airflow are listed?

The detailed specification states 800-2500RPM±10%, and the listing claims 26.5 Cubic Feet Per Minute airflow at 2500 RPM.

Will it fit my case?

The listed dimensions are 8L x 8W x 2.5H centimetres, and the description also gives an approximate 80x80x25mm size with 72 mm hole spacing. Check the mount and clearance against your case.

What is included?

The description’s package list says one fan and four screws. Check the selected listing if the included hardware is important.

Jiawu 80 mm PWM Case Fan, 800–2500 RPM · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

5.0
Thermalright Phantom Spirit 120 Vision Snow CPU Air Cooler
Thermalright Phantom Spirit 120 Vision Snow CPU Air Cooler

A$125.59

A$71.33

-43%
-43%
Product details in Markdown