Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Jectse NEMA 23 Stepper Motor Driver Kit, 23HS5628

The Jectse NEMA 23 Stepper Motor Driver Kit pairs a 23HS5628 motor with a TB6600 driver for CNC, engraving and 3D-printer motion projects. The listing describes closed-loop control and safety protections, but check the detailed specifications and package list against the selected listing before purchase.

At a glance

  • Listing describes a closed-loop system intended to reduce lost steps and adjust current in response to load.
  • Driver listing gives a 0.5-4.0A output-current range and 1–32 subdivision options, including the listed 2/A and 2/B settings.
  • Motor is listed as a two-phase hybrid type with 1.8° step angle and 126N.cm holding torsion.
  • Overheat, undervoltage and overcurrent protection are claimed for the driver.
Price
$44.47Save 15%

Reference price: $52.32

Price checked: 18 Nov 2026

View offer

Pros and cons

Pros

  • Motor and driver are both specified, with current, step angle, shaft diameter and torque details to help assess project fit.
  • The stated subdivision options and variable driver current give builders several listed setup choices.

Technical specifications

24 specifications
Identity
BrandJectse
ModelJectse3yx4ug18ag
Driver
Driver modelTB6600
Output current0.5-4.0A
Maximum power160W
Subdivision1, 2/A, 2/B, 4, 8, 16, 32
Recommended power supplyRecommend using 5A Switching Power Supply
Motor
Motor model23HS5628
Shaft diameter6.35mm
Current/phase2.8A
Holding torque12600g.cm
Step angle1.8°
TypeHybrid
Step lengthApprox. 56mm / 2.20in
Phase resistance0.9Ω
Phase inductance2.5mH
Holding torsion126N.cm
Rotor inertia300g.cm2
Wires4 Wires
Operating conditions
Operating temperature-10 to 45℃
Storage temperature-40 to 70℃
HumidityNo Condensation, No Water Droplets
Gas and dust conditionsNo Flammable Gas and Conductive Dust
Materials
MaterialsAlloy Steel, PCB, Aluminum Alloy, ABS

What to know before buying

  • The 5A switching power supply is recommended, but is not named in the package list. Confirm whether you have a suitable supply before planning installation.
  • Environmental conditions are stated as no condensation or water droplets, and no flammable gas or conductive dust. These are listed operating limits, not an outdoor or wet-environment rating.

Listing details to confirm

The listing uses both “holding torque” at 12600g.cm and “holding torsion” at 126N.cm, and claims closed-loop operation while naming the driver TB6600 without clarifying how these details map to the supplied system. Confirm driver and control compatibility, torque specification and closed-loop implementation for your setup. The package list also conflicts with the separate “Included Components” value “no”.

What’s in the box

  • MotorCheck selected pack
  • DriverCheck selected pack
  • Connecting cableCheck selected pack
  • Driver controllerCheck selected pack
  • KnobCheck selected pack

Check which accessories are included in your selected pack before buying.

Who is it for?

A good fit for

  • CNC, engraving or 3D-printer builders who need a NEMA 23 motor and driver combination and can verify controller and power-supply compatibility.
  • Users whose design can make use of the listed 1.8° motor step angle and driver subdivision settings.

Less suited to

  • Buyers who need a confirmed power supply included or a clearly documented closed-loop wiring and control arrangement.
  • Installations exposed to condensation, water droplets, flammable gas or conductive dust.
Jectse NEMA 23 Stepper Motor Driver Kit, 23HS5628 · photo 2
Additional product photo 2

Customer reviews on Amazon

5 / 5 · 1 ratings
  • 5 stars100%100%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

The supplied evidence contains only a single aggregate rating and no written customer feedback. That small sample cannot establish how reliably the motor, driver or claimed closed-loop features perform in practical CNC or printer setups.

Frequently asked questions

What motor and driver models are listed?

The listing specifies a 23HS5628 motor and a TB6600 driver.

What power supply does the listing recommend?

It recommends using a 5A switching power supply. The package list does not name a power supply, so plan to confirm this before ordering.

Does the listing clearly confirm closed-loop operation?

It claims a closed-loop system intended to reduce lost steps, but does not explain the implementation alongside the TB6600 driver model. Check the selected listing and confirm compatibility with your controller.

What are the stated environmental limits?

The listing gives an operating temperature of -10 to 45℃ and storage temperature of -40 to 70℃. It also specifies no condensation, water droplets, flammable gas or conductive dust.

Jectse NEMA 23 Stepper Motor Driver Kit, 23HS5628 · photo 3
Additional product photo 3

Alternative options

Product details in Markdown