Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Jectse Hall Effect Proximity Sensor, 10 mm NPN Normally Open

The Jectse Hall Effect Proximity Sensor is a three-wire, normally open NPN switch for detecting permanent magnets. The listing describes a 10 mm detection distance and a digital open-collector output, making it a candidate for magnetic sensing and compatible logic-circuit projects.

At a glance

  • Hall-effect sensing is specified for permanent magnets, rather than general-purpose object detection.
  • The claimed normally open NPN output uses three wires and an open-collector output stage.
  • The listing says the output can connect directly to transistor, TTL and MOS logic circuits.
Price
$8.67Save 15%

Reference price: $10.20

Price checked: 18 Nov 2026

View offer

Pros and cons

Pros

  • The stated 10 mm detection distance and magnetic target type give a clear starting point for magnetic sensing projects.
  • The three-wire NPN normally open output is specified alongside an open-collector digital output.
  • The listing describes compatibility with transistor, TTL and MOS logic circuits.

Technical specifications

16 specifications
Identity
BrandJectse
Detection and output
Sensor typeNJK - 5002C
Detection distance10 mm
OutputNPN three wire normally open type
Detectable objectspermanent magnets
Output current200 mA
Switching frequency320 KHZ
Output stageopen collector output
Output signalthe output is a digital voltage .
Electrical and wiring
Supply voltage5-24VDC,6-36VDC
Wiringbrown-Power+,blue-Power-,black-
Construction and dimensions
AppearanceM12mm cylinder
Shell materialcopper
Weight listed40 g
Package dimensions9.4 x 7.7 x 1.8 cm; 40 Grams
Power requirement
Batteries requiredNo

What to know before buying

Listing details to confirm

The listing gives conflicting supply ranges, 5-24VDC and 6-36VDC. Its title claims 6~36V, so confirm the applicable operating range before connecting power. The title also says 10mm while the body specifies an M12mm cylinder, and the wiring entry ends at “black-” without identifying the black wire’s function. Treat the 320 KHZ switching frequency and 200 mA output current as listing claims, not independently verified measurements.

Who is it for?

A good fit for

  • Electronics hobbyists building circuits that detect permanent magnets and can accommodate an NPN normally open output.
  • Buyers checking a compact cylindrical sensor for a project with a compatible power supply and logic input.

Less suited to

  • Applications requiring confirmed voltage or wiring details before purchase without first resolving the listing’s inconsistencies.
  • Sensing ordinary non-magnetic objects, which the listing does not claim.
Jectse Hall Effect Proximity Sensor, 10 mm NPN Normally Open · photo 2
Additional product photo 2

Customer reviews on Amazon

5 / 5 · 2 ratings
  • 5 stars100%100%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

Only a very small set of aggregate ratings is supplied, and it is entirely five-star. That is a limited positive signal rather than enough evidence to establish reliability or performance. No customer comments are available to explain the ratings, so buyers should rely on the stated electrical and detection details and resolve the conflicting voltage information before use.

Frequently asked questions

What does this sensor detect?

The listing says it detects permanent magnets and gives a detection distance of 10 mm.

What output does it use?

It is listed as a three-wire NPN normally open sensor with an open-collector digital output.

What supply voltage does it require?

The listing conflicts: it states both 5-24VDC and 6-36VDC, while the title claims 6~36V. Confirm the correct range before powering it.

Is the black wire’s function specified?

Not clearly. The wiring detail ends with “black-” and does not state its function.

Jectse Hall Effect Proximity Sensor, 10 mm NPN Normally Open · photo 3
Additional product photo 3

Alternative options

Product details in Markdown