Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Freud 99-034 Lock Mitre Router Bit, 45°, 1/2-Inch Shank

Inch Shank: The Freud 99-034 Lock Mitre Router Bit is designed to cut interlocking corner joints, with a listed thickness range suited to thinner panels as well as stock for box and cabinet work. It supports CNC, automatic and table-mounted portable routers, but the setup requires one board to run vertically and the mating piece horizontally.

At a glance

  • Made to cut interlocking 90-degree corner joints.
  • The listed 12.7–25.4 mm thickness range includes thinner panels for projects such as humidors and jewellery boxes.
  • The stated procedure uses one board vertically and its mating piece horizontally.
Price
$135.91Save 15%

Reference price: $159.90

Price checked: 19 Nov 2026

View offer

Often bought together

Pros and cons

Pros

  • The stated stock range and thinner-panel use extend the bit's application beyond thicker box joints.
  • The listing claims use with composition materials, plywood, hardwoods and softwoods, and with CNC or table-mounted portable routers.

Technical specifications

11 specifications
Identity
BrandFreud
Model99-034
Dimensions and installation
Stock thickness range12.7 - 25.4 mm
Shank1/2-Inch Shank
Cutting length1.31 Inches
Cutting diameter2.75 Inches
Weight listed1.04 Pounds
Materials and protection
Material listedBlend
Cutting and use
Cut type listedStraight Cut
Compatible materials claimedCuts all composition materials, plywoods, hardwoods and softwoods
Router types claimedUse on CNC and other automatic routers, as well as table-mounted portable routers

What to know before buying

  • The listing gives stock thickness as 12.7 - 25.4 mm and also describes use in 1/2 to 1 in stock. Customer feedback reports mixed setup experiences and that some found the bit larger than expected, so confirm the required clearance and joint setup for your project.

What’s in the box

Included
  • 1 x Freud 1/2-Inch Shank Lock Mitre Bit, 12.7 - 25.4 mm Thickness

Who is it for?

A good fit for

  • Woodworkers making interlocking 90-degree corners in stock within the listed thickness range.
  • Users with a CNC, automatic router or table-mounted portable router who can set up the two boards in the stated orientations.
  • Projects involving thinner panels, including humidors and jewellery boxes.

Less suited to

  • Buyers seeking a general-purpose router bit rather than a lock mitre profile.
  • Users whose router cannot accept the listed 1/2-inch shank or whose stock thickness falls outside the stated range.
Freud 99-034 Lock Mitre Router Bit, 45°, 1/2-Inch Shank · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 261 ratings
  • 5 stars75%75%
  • 4 stars11%11%
  • 3 stars10%10%
  • 2 stars2%2%
  • 1 star2%2%

Customer feedback describes the bit as sharp and sturdy, with reports of good results on hardwoods and appreciation for its functionality. Setup experiences are mixed, and some customers say the bit is larger than expected. That matters for buyers who need a predictable fit: verify available clearance and allow for careful alignment of the vertical and horizontal board cuts.

Positive themes

  • Customers describe the bit as sharp and sturdy, and report good results on hardwoods.
  • Some customers appreciate its functionality and consider it worth the extra cost.

Mixed feedback

  • Feedback on setup is mixed, with some finding it easy and others difficult.
  • Some customers report that the bit is larger than they anticipated.

Frequently asked questions

What joint does the Freud 99-034 make?

It is described for interlocking 90-degree corner joints. The listing says to run one board vertically and the piece being joined horizontally.

What stock thickness does it suit?

The listed size is 12.7 - 25.4 mm, and the listing also describes use in 1/2 to 1 in stock. Confirm your material thickness and setup before cutting.

Which routers can use this bit?

The listing claims compatibility with CNC and other automatic routers, as well as table-mounted portable routers. It specifies a 1/2-inch shank.

What materials can it cut?

The manufacturer listing claims it cuts composition materials, plywoods, hardwoods and softwoods. This is a stated capability, not an independently verified performance result.

Freud 99-034 Lock Mitre Router Bit, 45°, 1/2-Inch Shank · photo 3
Additional product photo 3

Alternative options

Product details in Markdown