1 / 7EZDIY-FAB 3-in-1 ARGB PWM Fan Hub, 8 PWM and 8 ARGB Ports
Ports: EZDIY-FAB’s 3-in-1 ARGB PWM fan hub combines eight PWM fan connections with eight 5V ARGB lighting outputs, powered by SATA. It suits a desktop build needing a single motherboard PWM signal and synchronised lighting, provided the fans and lighting use compatible connections.
At a glance
- Eight connected 4-pin PWM fans follow the motherboard's shared PWM signal. Fan 1 supplies RPM feedback to the system.
- Eight LED outputs are for 5V 3-pin ARGB devices, with support for up to 200 LEDs total.
- A selector switch allows the sync input to match a compatible 5V 3-pin ARGB or 12V 4-pin RGB motherboard header.
- SATA power supplies connected fans and lighting, while the included adhesive hook-and-loop strip is intended to help mount the hub inside the case.
Reference price: $30.99
Price checked: 18 Nov 2026
View offerAhead of Black FridayExplore the selectionOften bought together
Pros and cons
Pros
- Combines fan and lighting connections in one hub, which can reduce cable runs to motherboard headers.
- Supports motherboard PWM control for connected 4-pin PWM fans and synchronised lighting through compatible motherboard software.
Cons
- The hub has no standalone lighting modes. Lighting control depends on a compatible motherboard sync connection.
Technical specifications
11 specifications| Brand | EZDIY-FAB |
|---|---|
| Model | US-12V 5V fan hub-16P |
| Fan ports | 8 PWM |
|---|---|
| ARGB ports | 8 ARGB |
| Power input | SATA |
| Fan connector | 4-Pin |
| Voltage | 12 Volts |
| Compatible devices | Desktop |
| Lighting support | 5V 3-pin ARGB output, up to 200 LEDs |
| Motherboard lighting sync input | 5V ARGB or 12V RGB |
| Weight listed | 0.11 Kilograms |
|---|
What to know before buying
- The 12V 4-pin RGB option applies to the motherboard sync input only. The hub's LED output ports are for 5V 3-pin ARGB devices and do not support 12V 4-pin RGB. Compatible 3-pin fans can connect but run at full speed rather than receiving PWM control. Power off the PC before installation.
Who is it for?
A good fit for
- Desktop PC builders connecting up to eight 4-pin PWM fans and up to eight 5V 3-pin ARGB devices.
- Builds where motherboard-based fan speed control and lighting synchronisation are both required.
Less suited to
- Users seeking independent lighting modes without a compatible motherboard sync header.
- Builds that need the hub to control 3-pin fans with PWM or connect 12V 4-pin RGB devices to its LED output ports.

Customer reviews on Amazon
- 5 stars
67% 67% - 4 stars
13% 13% - 3 stars
7% 7% - 2 stars
4% 4% - 1 star
9% 9%
Customer feedback reports ease of installation, connectivity and value as positives, while RGB control experiences are mixed and durability concerns include reports of failures and LED damage. For this hub, confirm the motherboard header and device types carefully: its listed outputs are 5V 3-pin ARGB, and its fan ports share PWM control. The ratings are mostly positive but include a meaningful spread of lower-star ratings, so they do not establish consistent reliability or lighting performance.
Positive themes
- Customers describe installation as easy and report positive experiences with connectivity and value.
Negative themes
- Customer feedback includes concerns about durability, including reported failures and LED damage.
Mixed feedback
- RGB control feedback is mixed, including reports of successful Mystic Light use as well as issues with specific colours.
Frequently asked questions
Can this hub control fan speed?
Its 4-pin PWM fan ports follow the motherboard's shared PWM signal. The first fan port provides RPM feedback. Compatible 3-pin fans run at full speed and cannot be PWM-controlled through the hub.
Can I connect 12V RGB lighting to the LED ports?
No. The LED output ports are for 5V 3-pin ARGB devices. The 12V 4-pin option is a motherboard sync input selected with the switch, not support for 12V RGB devices on the LED outputs.
Does the hub provide lighting effects on its own?
No. The listing says the sync cable must connect to a compatible motherboard header for lighting control, and the hub has no standalone lighting modes.
How many LEDs can it support?
The listing claims support for up to 200 LEDs in total across its eight LED ports.

Alternative options

AsiaHorse VE-HUB 2IN1 ARGB/PWM Fan Hub | 9-Port PWM + 9-Port 5V ARGB | SATA Power Supply| Clean Cable Management | DIY PC Must-Have
$21.24

10 Port ARGB Fan Hub, 10-Port 4 Pin PWM & 5V 3Pin ARGB PC Fan Controller, Magnetic Suction, SATA Power Input, Supports 10 Groups of RGB Fans
$15.75

AsiaHorse Umbra V2 5V 3-Pin ARGB Hub, Software 100+ Preset Lighting Modes | 50-Device Capacity, Custom PWM Speed Curve, Profile Save, 90% Faster Launch, Overload Protection for PC RGB Builds
$44.19

EZDIY-FAB RGB Converter/Fan hub, 12V RGB to 5V ARGB Transfer Hub with 3-Way Splitter, Motherboard with 12V 4-pin Header can Control 5V ADD-RGB Products, Built-in 50 Color Modes
$21.24

Thermalright ARGB Fan HUB Controller Support 8 Groups of Fans, 8-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Fan Hub, Strong Paste+Magnetic Suction, SATA Power Cord(12V 4-pin RGB is not Supported)
$23.68

ARGB Splitter PWM Fan Hub, 10 Ports PWM Fan Hub with Controller Splitter 1 to 10 Serial ATA Power Port 5V 3Pin Magnetic Base PC Case Fan Splitter ARGB Controller PC Fans Hub for
$27.45

ARGB Controller 5V 3Pin SATA Power Supply ARGB Light Stripe Remote Controller, ARGB PC Fans Controller Kit for PC Rainbow LED Strip, Computer ARGB Fans (Black)
$8.58

ARGB PWM Fan Hub 2 in 1 PWM ARGB Case Fan Hub,Dual 10 Bit Hub Computer Case Fan Splitter,4Pin PWM 3Pin ARGB Fan Hub with Acrylic Case, Interface Power Supply, Magnetic Design
$14.57

Veumoie PWM Speed Controller 4Pin PWM Fan Governor PWM Governor USB Type-C Power Supply DIY Watercooling Cooler Option, Fine Workmanship B
$23.39

Yieidui PWM Speed Controller 12V 4Pin PWM Fan Governor USB Type-C Power Supply DIY Watercooling Cooler with 1 to 3 Adapter Cable
$20.29
























