Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

eSUN PVA Water-Soluble 3D Printer Filament, 1.75 mm, 0.5 kg

eSUN PVA Water-Soluble Filament is a support material for 3D prints, intended to dissolve in water after printing. Its listed 1.75 mm diameter and 0.5 kg net filament weight suit compatible printers, while the listing also gives setup temperatures and a two-extruder support workflow.

At a glance

  • Designed to dissolve in water so support structures can be washed away from complex prints.
  • Listing claims bonding with materials such as PLA and says removal can reduce the risk of damaging the model.
  • The described support workflow uses a second extruder for PVA while another prints the model material.
  • Manufacturer recommends printing at 190℃ within a stated range of 180-230℃.
Price
$33.97Save 32%

Reference price: $49.95

Price checked: 18 Nov 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • Water-soluble supports can help with complex shapes that are difficult to support with material that must be broken away.
  • The listing provides temperature, bed, fan and speed starting points for setup.
  • Vacuum-sealed packaging with desiccant is claimed for the filament.

Cons

  • Using PVA as a separate support material is most applicable to printers with a second extruder, as described in the listing.

Technical specifications

15 specifications
Identity and dimensions
BrandeSUN
Filament diameter1.75 Millimeters
Net filament weight0.5KG
Weight listed1 Kilograms
ColourNatural
Manufacturer part numberAUPVA175N05KG
Material properties
Special featureWater Soluble
Density1.25g/cm³
Tensile strength22MPa
Elongation at break360%
Suggested print settings
Printing temperature180-230℃ (Recommended Temperature 190℃)
Bed temperature45-60°C
Fan speed100%
Printing speed20-50mm/s
Recommended heated build platformTextured Paper, PEI

What to know before buying

Listing details to confirm

The listing is inconsistent about quantity: the title says 0.5KG and packaging text calls this the filament net weight, while the details list the item weight as 1 Kilograms. Confirm the delivered spool's net amount before purchase. The stated settings are manufacturer recommendations, not guaranteed settings for every printer or material pairing.

Who is it for?

A good fit for

  • Owners of compatible dual-extruder printers who want water-removable support for complex prints.
  • Users printing with PLA who want to try a support material the listing says bonds well with it.

Less suited to

  • Buyers who need a conventional single-material filament for printing finished parts rather than support structures.
  • Users whose printer cannot accommodate 1.75 mm filament.
eSUN PVA Water-Soluble 3D Printer Filament, 1.75 mm, 0.5 kg · photo 2
Additional product photo 2

Customer reviews on Amazon

4.2 / 5 · 10 ratings
  • 5 stars75%75%
  • 4 stars0%0%
  • 3 stars11%11%
  • 2 stars0%0%
  • 1 star14%14%

Aggregate ratings lean positive, with five-star ratings forming the largest reported share, but one-star and three-star ratings are also present. With a small rating sample and no written feedback supplied, the figures do not explain the reasons behind those experiences. For buyers, this uncertainty matters because support-filament results depend on printer setup and the material pairing, and the listed spool weight is inconsistent.

Frequently asked questions

What is this filament intended for?

It is PVA support material. The listing describes printing supports that can later be removed by immersing the model in water.

Does the listing recommend a particular printer setup?

It describes using a two-extruder printer, with one extruder printing the model and the other printing PVA supports.

What print settings does eSUN list?

The supplied settings specify 180-230℃ printing temperature, with 190℃ recommended, a 45-60°C bed, 100% fan speed and 20-50mm/s printing speed. Actual compatibility and results can depend on the printer and material combination.

How much filament is included?

The title and packaging description say 0.5KG of filament, but the item details list a weight of 1 Kilograms. Confirm the selected listing's spool quantity because those weight details conflict.

eSUN PVA Water-Soluble 3D Printer Filament, 1.75 mm, 0.5 kg · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.4
Zoyood LC436XL Compatible Ink Cartridges, 4-Pack
Zoyood LC436XL Compatible Ink Cartridges, 4-Pack

A$37.99

A$28.49

-25%
-25%
Product details in Markdown