Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

eSUN PLA-LW 1.75 mm Lightweight Foaming PLA Filament, 1 kg

eSUN PLA-LW is a 1.75 mm polylactic acid filament designed to foam during printing for lightweight parts. Its foaming behaviour makes it relevant to model aircraft and props, but buyers should account for the higher listed print-temperature range and mixed reports of layer adhesion.

At a glance

  • Foams during printing, with the listing describing reduced-density parts for lightweight applications.
  • The manufacturer says foaming and strength can be controlled by adjusting print temperature between 210℃ and 270℃.
  • Suggested applications include model aircraft, drones and cosplay props. The listing also says the material is easy to paint.
Price
$34.85Save 15%

Reference price: $41.00

Price checked: 18 Nov 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • Foaming can produce lighter parts than ordinary PLA for the same model volume, according to the listing.
  • The adjustable foaming behaviour offers scope to tune lightweight model prints.
  • The listing describes a matte surface and paint adhesion suited to finished props and models.

Cons

  • The listed foaming temperature range of 210℃-270℃ is a key process requirement and may require tuning for a given printer and print.
  • Customer feedback reports inconsistent layer adhesion, with some users indicating that higher temperatures may be needed.

Technical specifications

10 specifications
Identity
BrandeSUN
ModelPLA175N1A
Dimensions and installation
Filament diameter1.75 Millimeters
Weight listed2.2 Pounds
Materials and appearance
Material listedPolylactic Acid
ColourNature
Printing properties
Foaming temperature range210℃-270℃
Listed maximum foaming volume ratio220%
Density0.54g/cm3
Printing extrusion rate can be reduced to45%

What to know before buying

Listing details to confirm

The listing describes the filament as 1KG in its title and as 2.2 Pounds in item-weight details. Its listed maximum foaming volume ratio is 220%, while another feature says printing increases volume by nearly 1.2 times. These figures refer to different stated descriptions and should not be treated as the same confirmed expansion amount. Customer feedback also mentions successful use at 204C but reports layer adhesion requiring 230C, differing from the listed foaming range of 210℃-270℃. Confirm the selected listing and tune temperatures for the intended print.

Who is it for?

A good fit for

  • Model aircraft and other lightweight printed parts where reduced weight is a priority.
  • Drone and cosplay-prop makers who want a filament described as paintable.

Less suited to

  • Buyers wanting ordinary PLA behaviour without foaming-related print tuning.
  • Projects where consistent layer adhesion or strength under stress is essential without first validating settings and the finished part.
eSUN PLA-LW 1.75 mm Lightweight Foaming PLA Filament, 1 kg · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 129 ratings
  • 5 stars80%80%
  • 4 stars10%10%
  • 3 stars6%6%
  • 2 stars2%2%
  • 1 star2%2%

Customer feedback is generally positive about print quality and usability, with reports of good prints at 204C. However, colour opinions vary, including comments that it can look more transparent than expected, and durability feedback ranges from decent strength to breakage under light stress. Layer adhesion is a reported concern, with some feedback pointing to 230C. These differences matter for parts intended to carry load, while the listing's broad foaming range and lightweight-use claims are product claims rather than proof of a successful result on a particular printer. Opinions on value are also divided.

Positive themes

  • Feedback describes good print results and generally positive printability.

Negative themes

  • Layer adhesion is a reported concern, with some feedback indicating 230C was needed.

Mixed feedback

  • Colour appearance is mixed, including reports that it can appear more transparent than natural.
  • Durability feedback ranges from adequate strength to breakage under light stress.
  • Opinions about value for money are divided.

Frequently asked questions

What makes this filament different from standard PLA?

It is designed to foam during printing, which the listing says can increase printed volume and reduce part density. Results depend on printing conditions.

What temperature range is listed for printing?

The listed foaming and temperature-adjustment range is 210℃-270℃. Customer feedback also mentions printing at 204C and reports that some users needed 230C for layer adhesion, so settings may require tuning.

What is it intended to print?

The listing names model aircraft, drones and cosplay props, where lighter parts or paintable surfaces may be useful.

Does the listing give one clear expansion figure?

No. It states a maximum foaming volume ratio of 220% and separately says volume increases by nearly 1.2 times. Treat these as inconsistent descriptions rather than a single confirmed expansion figure.

eSUN PLA-LW 1.75 mm Lightweight Foaming PLA Filament, 1 kg · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.7
ELEGOO Water Washable 2.0 Resin, Ceramic Grey, 2000g
ELEGOO Water Washable 2.0 Resin, Ceramic Grey, 2000g

A$72.01

A$57.60

-20%
-20%
Product details in Markdown