1 / 6ELEGOO UNO R3 Arduino Project Starter Kit
Arduino: The ELEGOO UNO R3 Project Starter Kit combines a USB-connected controller board with a broad selection of circuit components and guided lessons. It is aimed at beginners who want to practise wiring and programming through sensor, display and motor projects.
At a glance
- The listing describes more than 22 guided projects, while another product section specifies a 24-lesson tutorial.
- The component mix covers basic circuits, input sensors, displays, and servo and stepper motors.
- Solderless breadboard work and a pre-soldered LCD header are described as beginner-friendly setup features.
Often bought together
Pros and cons
Pros
- A varied set of sensors, displays, motors and circuit parts supports several kinds of introductory projects.
- Guided lessons and example code are described for learning inputs, outputs, sensing, timing and motor control.
- A solderless breadboard and plug-in modules let beginners focus on wiring and code rather than soldering.
Technical specifications
7 specifications| Brand | ELEGOO |
|---|---|
| Model | UNO R3 |
| Connection listed | USB |
|---|---|
| Processor speed | 16 MHz |
| Processor brand | Atmel/Microchip |
| Weight listed | 1.35 Pounds |
|---|---|
| Dimensions | 14L x 21.1W x 5H centimetres |
What to know before buying
- The power-module input should not exceed 9V. The listing also recommends adult supervision for younger learners and describes suitability from age 10.
What’s in the box
Included- UNO R3 controller board
- LCD1602 module
- Breadboard expansion board
- Power-supply module
- Joystick module
- IR receiver
- SG90 servo motor
- Stepper motor
- ULN2003 stepper motor driver board
- Ultrasonic sensor
- DHT11 temperature and humidity module
- 9V battery with DC connector
- 65 jumper wires
- USB cable
- Active buzzer
- Passive buzzer
- Potentiometer
- 5V relay
- Breadboard
- Remote
- Tilt switch
- 5 small buttons
- Screen
- 4-digit 7-segment display
- 5 yellow LEDs
- 5 blue LEDs
- 5 green LEDs
- 5 red LEDs
- RGB LED
- 2 photoresistors
- Thermistor
- 2 1N4007 rectifier diodes
- 2 PN2222 NPN transistors
- 74HC595 IC
- 120 resistors
- 10 female-to-male Dupont wires
Who is it for?
A good fit for
- Arduino-compatible electronics beginners following guided projects
- Homeschool, coding-club or STEM classroom activities
- Learners who want to experiment with sensors, displays and small motors
Less suited to
- Buyers seeking a project kit with confirmed wireless connectivity
- Users who need advanced networking or a specified wireless feature set

Customer reviews on Amazon
- 5 stars
79% 79% - 4 stars
14% 14% - 3 stars
4% 4% - 2 stars
0% 0% - 1 star
3% 3%
Customer feedback describes the kit as beginner-friendly, with a useful component selection and educational material. Feedback is mixed on reliability and project complexity. That matters for a first learning kit: the supplied range of parts and lessons offers varied practice, but buyers should be prepared for some projects to feel more demanding than others and should not treat reported reliability as uniform.
Positive themes
- Customers describe it as suitable for beginners.
- Customers praise the selection of components and the educational material.
Mixed feedback
- Customer feedback is mixed on reliability.
- Customers disagree about project complexity.
Frequently asked questions
What kinds of projects does the kit cover?
The listing describes lessons involving LEDs, temperature and distance sensing, motors, an LCD, joystick input and an infrared receiver. The exact lesson count varies across listing sections.
Does it require soldering?
The listing describes plug-in modules, a solderless breadboard and a pre-soldered LCD header, so the described introductory builds focus on wiring and code rather than soldering.
What computer connection is listed?
USB is listed as the connection. The listing does not establish wireless connectivity for this kit.
What power limit should I observe?
The listing says to keep the power-supply module input at 9V or below.

Alternative options

ELEGOO Mega 2560 R3 Project The Most Complete Starter Kit with Tutorial | Compatible with Arduino, Ultimate Starter Kit, PDF Tutorial, 35+ Guided Projects, 200+ Components, Sensors, Displays, Motors
$67.99

ELEGOO 37-in-1 Sensor Modules Kit with Tutorial Compatible with Arduino | Upgraded Parts, Suitable for UNO R3 MEGA Nano, 100% Compatible with Arduino IDE and STM32, Most Commonly Used Modules
$38.24

ePalZoneXP Starter Kit, Compatible with Arduino Uno R3, the Most Detailed 50+ Lessons, Plus 40+ Background Knowledge Articles, Detailed Explanation, Compass, Gyro (Ultimate Kit)
$39.99

Freenove Ultimate Starter Kit with Board V4 (Compatible with Arduino IDE), 274-Page Detailed Tutorial, 217 Items, 51 Projects
$50.96

Breadboard Set Electronics Component Starter Kit for R3
$22.59

ELEGOO ESP-32 Super Starter Kit with Tutorial Compatible with Arduino IDE | Development Board, USB-C Dual Core Microcontroller Support AP/STA/AP+STA, CP2102 Chip, WiFi, Bluetooth, 200+ parts for IoT
$71.99

ELEGOO UNO R3 Project Most Complete Starter Kit, Compatible with Arduino | 63 Items, 200+ Components, 30+ Guided Projects, PDF Tutorial, Organized Storage, STEM and DIY Circuit Building
$60.79

ELEGOO UNO R3 Smart Robot Car Kit V4 with Camera, Compatible with Arduino | FPV Video, Line Tracking, Obstacle Avoidance, Auto Follow, App & IR Control, Class STEM Building & Coding Kit, Gift for 12+
$81.59

ELEGOO Upgraded Electronics Fun Kit w/Power Supply Compatible with Arduino | PDF Tutorials, Power Supply Module, Jumper Wire, Precision Potentiometer, 830 tie-Points Breadboard, 300+ Components
$22.94

Basic Electronic Starter Kit for Arduino Breadboard Power Jumper Wires Resistors LED Power Supply Electronic Fun Kit Compatible with Arduino IDE UNO R3 Mega2560 Raspberry Pi
$19.99

ELEGOO UNO R3 Basic Starter Kit with Tutorial Compatible with Arduino IDE | PDF Tutorial, Basic Electronic Components Kit for Arduino Beginner, Learn Coding with Guided Projects
$27.99

