Aussie Deal ScoutDeals for Australia
Search
Product guide

ELEGOO Nano V3.0 Microcontroller Board, 3-Pack

The ELEGOO Nano V3.0 is a compact, breadboard-friendly microcontroller board offered here as a three-board pack. It is listed as compatible with the Arduino IDE, but the kit excludes USB cables and the header pins are unsoldered, so plan for those before starting a project.

At a glance

  • Three Nano boards are listed in the pack, with no USB cables included.
  • The board is described as breadboard-friendly and compact, making it suitable for projects where board space matters.
  • Uses the ATmega328P and CH340, rather than the FT232 USB chip mentioned for the official version. A suitable driver may be needed.
  • The listing describes USB power and external power options. Check the notes because the stated external input ranges differ across listing sections.
Price
$19.99Save 20%

Reference price: $24.99

Price checked: 18 Nov 2026

View offer

Often bought together

Pros and cons

Pros

  • Three boards provide multiple units for separate builds or spares.
  • Compact, breadboard-friendly format can leave more room for components on a breadboard.
  • Listed Arduino IDE compatibility and ATmega328-based design suit common microcontroller project workflows.

Cons

  • USB cables are not included, so USB connection and programming require a separately obtained Mini-B cable.
  • Header pins are unsoldered, which requires soldering before using them in many breadboard setups.

Technical specifications

17 specifications
Identity
BrandELEGOO
ModelNano V3.0
Connectivity and controls
Wired connection listedUSB
Computing specifications
RAM listed2 KB
Storage listed32 KB
MicrocontrollerATmega328
ArchitectureAVR
Clock speed16 MHz
Operating voltage5 V
EEPROM1 KB
Digital I/O pins22
DC current per I/O pin40 mA (I/O Pins)
Power consumption19 mA
Power
Input voltage7-12 V
Dimensions and installation
Weight listed0.35 Pounds
PCB size18 x 45 mm
Header pinsThe header pins haven't been soldered.

What to know before buying

Listing details to confirm

The listing is inconsistent about external input voltage: one section says 6-20V unregulated and another says 6-12V, while the technical specifications list 7-12 V. It also varies between ATmega328 and ATmega328P, describes 22 digital I/O pins while detailing 14 digital pins, and labels 32 KB as storage although another section calls it flash memory. Confirm the exact board revision and relevant electrical limits before designing around these details.

Who is it for?

A good fit for

  • Arduino IDE users needing compact boards for breadboard-based projects.
  • Hobbyists or learners who can solder headers and already have, or will obtain, a Mini-B USB cable.
  • Projects that benefit from buying several microcontroller boards together.

Less suited to

  • Anyone needing a ready-to-use board with soldered headers or a supplied USB cable.
  • Buyers whose project depends on a confirmed input-voltage range or exact pin count without checking the board revision.
ELEGOO Nano V3.0 Microcontroller Board, 3-Pack · photo 2
Additional product photo 2

Customer reviews on Amazon

4.8 / 5 · 94 ratings
  • 5 stars87%87%
  • 4 stars10%10%
  • 3 stars0%0%
  • 2 stars2%2%
  • 1 star1%1%

Customer feedback reports positive impressions of reliability and quality, including a mention of a board running its preloaded blink sketch. That is encouraging for basic project use, though feedback does not establish performance across every unit or confirm the conflicting listing specifications. The aggregate ratings are also mostly at the positive end, with a small spread of lower ratings, so treat them as an overall signal rather than a guarantee.

Positive themes

  • Customers report positive impressions of reliability.
  • Customers report positive impressions of product quality.

Frequently asked questions

How many boards are in the pack?

The listing identifies three Nano boards.

Does the pack include a USB cable?

No. The listing says cables are not included and specifies a Mini-B USB cable for use over USB.

Are the header pins soldered?

No. The listing says the header pins have not been soldered.

Which USB driver does this board use?

The listing identifies a CH340 chip rather than FT232 and says to use the manufacturer's driver. Check the board revision and operating system when setting it up.

ELEGOO Nano V3.0 Microcontroller Board, 3-Pack · photo 3
Additional product photo 3

Alternative options

Product details in Markdown