1 / 5ELEGOO 28BYJ-48 5V Stepper Motor and ULN2003 Driver Board, 5 Sets
Sets: ELEGOO 28BYJ-48 is a five-set stepper motor and ULN2003 driver-board pack for low-speed, light-load positioning projects. The listing describes five motors and five boards, with 5-wire, 4-phase motors and nominal 1:64 reduction. This suits classroom experiments and repeated prototypes, but not applications needing high torque or closed-loop positioning.
At a glance
- The listing claims five matched motors and five ULN2003 driver boards, intended for multiple builds or replacements.
- Four onboard LEDs indicate the active coil sequence during setup.
- The described geared motors target controlled, low-speed movement in light-load positioning projects.
- The driver board switches motor current so the load is not powered directly from a microcontroller I/O pin.
Often bought together
Pros and cons
Pros
- A five-motor, five-driver set can support several prototypes without sourcing each motor and board separately.
- IN1-IN4 inputs and visible coil-sequence LEDs can help with wiring and control setup.
Cons
- These geared stepper motors are described for low-speed, light-duty movement rather than high-torque or closed-loop positioning.
Technical specifications
12 specifications| Brand | ELEGOO |
|---|---|
| Model | EL-SM-003 |
| Motor type | 28BYJ-48 |
|---|---|
| Rated voltage | DC5V 4-phase |
| Motor design | 5-wire, 4-phase unipolar |
| Reduction ratio | 1/64 |
| Stepper driver | ULN2003 |
| Connection listed | USB |
|---|---|
| Driver inputs | IN1-IN4 |
| Driver indicators | Four onboard LEDs |
| Weight listed | 0.21 Grams |
|---|
| Processor listed | Core i5-9500 |
|---|
What to know before buying
- For reliable operation, the listing advises a regulated 5 V supply with sufficient current, shared controller and motor-supply grounds, and checking the plug and IN1-IN4 sequence. Reduce speed if the shaft buzzes or vibrates. Steps per revolution may need calibration because gearbox ratio, backlash and load can affect final position. De-energise coils when holding torque is not needed to help reduce heat.
Listing details to confirm
Listing details are inconsistent: the title and feature text describe five motor-and-driver sets, while the explicit package list names five motors and five boards, and a separate components field lists a female-to-male cable without quantity. The listed USB connection, computer processor and weight also appear at odds with the stepper-motor product identity, so they should not be treated as confirmed motor specifications.
What’s in the box
- 28BYJ-48 stepper motors, 5Check selected pack
- ULN2003 driver boards, 5Check selected pack
- Female-to-male jumper wires, 10Check selected pack
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- Classroom and learning projects involving basic stepper-motor control.
- Maker prototypes, small displays, gauges or other light-load, low-speed positioning tasks.
- Buyers who want several motors and driver boards for repeated builds or spares.
Less suited to
- High-torque applications or projects requiring closed-loop position control.
- Applications that require a guaranteed output position without calibration for gearbox backlash and load.

Customer reviews on Amazon
- 5 stars
100% 100% - 4 stars
0% 0% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
0% 0%
Only aggregate rating information is supplied, with a small sample showing five-star ratings. That is a limited signal and does not establish specific strengths or performance. There is no customer-comment evidence to explain the ratings, so assess suitability from the stated low-speed, light-load use and check the package details.
Frequently asked questions
What is the stated set quantity?
The product title and feature text claim five motor-and-driver sets. The package details are inconsistent, so confirm the contents of the selected listing before purchase.
What kind of project is this motor intended for?
The listing describes low-speed, light-load positioning such as clocks, gauges, rotating displays and learning projects. It is not presented as a high-torque or closed-loop solution.
What power and wiring does it need?
The listing recommends a regulated 5 V supply with sufficient current, a shared ground between controller and motor supply, and checking the motor plug and IN1-IN4 order.
Does it include a controller or power supply?
The product description says the controller board and external 5 V supply are not included. The separate component details mention a female-to-male cable, so package contents should be confirmed.

Alternative options

DIGISHUO 3Pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board for Arduino PI PIC Raspberry Pi
$18.69

ELEGOO 37-in-1 Sensor Modules Kit with Tutorial Compatible with Arduino | Upgraded Parts, Suitable for UNO R3 MEGA Nano, 100% Compatible with Arduino IDE and STM32, Most Commonly Used Modules
$38.24

ELEGOO MEGA2560 R3 Board ATmega2560 ATMEGA16U2 with USB Cable | Compatible with Arduino IDE
$22.09

Eacam Stepper Motor, 1pcs Nema 17 Stepper Stepping Motor Drive Control 2 Phase 1.8 Degree 0.9A 0.4N.M 42mm with 90cm Lead Cable 3D Printer/CNC Accessory Replacement.
$60.22

Nema 17 Stepper Motor 34mm 1.5A 2 Phase 1.8 Degree with 90cm Cable, for 3D Printer, CNC Machine, 12V-24V
$19.99

Versatile 6-Pack Mini Electric Motors - DC 1.5-6V, 15000-16500RPM Electric Motor for DIY Toys & Science Experiments - Electric Toy Cars, Educational Projects, and Hobby Electronics
$9.49

SG90 9G Micro Servo Motor Kit for RC Robotics, Arduino Projects, and DIY Electronics, High Torque for Robot Arm and Remote Control Vehicles
$16.99

Official Creality Ender 3 Dual Z-axis Upgrade Kit, Lead Screw with Stepper Motor and Metal Power Supply Holder, 3D Printer Accessories Upgrades for Ender 3/Ender 3 Pro/Ender 3 V2
$44.99

LuojinLuoda 5Pcs DC Motor Driver Board DRV8833 Compatible with TB6612FNG | Designed for Computer Motor Fan Light Control, Size 21x18mm Electronic Board Module 5 Pieces
$15.99

Nema 17 Stepper Motor 40mm 1.5A 2 Phase 1.8 Degree with 100cm Cable, for 3D Printer, CNC Machine, 12V-24V (42-40)
$19.99

ELEGOO Mega 2560 R3 Project The Most Complete Starter Kit with Tutorial | Compatible with Arduino, Ultimate Starter Kit, PDF Tutorial, 35+ Guided Projects, 200+ Components, Sensors, Displays, Motors
$67.99

Nema 17 Stepper Motor High Performance Small Size Extruder Motor
$20.20

