1 / 7Dpofirs P2S Extruder Filament Sensor, 2 Sets
Sets: Dpofirs’ P2S extruder filament sensor is a replacement hall switch board assembly with ribbon cable, listed for Bambu Lab P2S 3D printers. Its intended role is detecting filament at the extruder, including in AMS-assisted multicolour printing.
At a glance
- The listing specifies compatibility with Bambu Lab P2S 3D printers.
- The hall switch board is described as monitoring filament presence in the extruder.
- The listing says the sensor communicates with AMS for multicolour filament transitions.
- Replacement is intended for filament-detection failures or damaged sensor cables.
Pros and cons
Pros
- A targeted replacement component for a stated P2S filament-sensing application.
- The listing gives a replacement procedure, including removing the rear cover and fastening screws.
Technical specifications
6 specifications| Brand | Dpofirs |
|---|
| Listed application | Replacement for Bambu Lab P2S |
|---|---|
| Component type | Extruder Filament Sensor |
| Material | PCB |
| Weight listed | 5 g |
|---|---|
| Package dimensions | 8 x 4 x 2 cm; 5 Grams |
What to know before buying
Listing details to confirm
The title describes two sets and a hall switch board assembly with ribbon cable, while the package list specifies two sensors and two screws. The ribbon cable is not confirmed in that package list, so check the selected listing contents before buying. The listing also gives package dimensions with a 5-gram figure and separately lists item weight as 5 g.
Who is it for?
A good fit for
- Bambu Lab P2S owners replacing a filament sensor or damaged sensor cable.
- Users troubleshooting filament-presence detection or AMS-assisted multicolour transitions.
Less suited to
- Owners of printers other than the stated Bambu Lab P2S unless compatibility is confirmed.
- Buyers who need a complete extruder assembly rather than a sensor replacement.

Frequently asked questions
Which printer is this sensor listed for?
The listing specifies replacement use with Bambu Lab P2S 3D printers. It does not establish compatibility with other models.
What does the sensor do?
The listing describes a hall switch board that monitors filament presence at the extruder and communicates with AMS for multicolour transitions.
What is included?
The package list specifies two sensors and two screws. Although the title mentions a ribbon cable, the package list does not confirm one, so check the selected listing before ordering.
Is installation tool-free?
No. The described procedure involves removing the print head rear cover, loosening the cutter, disconnecting the PTFE tube and removing two screws with an H1.5 hex wrench.

Alternative options

Extruder Filament Sensor Replacement Fit for Bambu Lab P2S 3D Printer | Hall Switch Filament Detector for Precise Detection Print Failure Prevention, 3D Printing Accessory
$43.03

Cryfokt Hardened Steel Extruder Gear Assembly | Nano Coating Hotend Component for P1S P1P X1, 2 X Gears Accessory
$23.32

SENECESLI Hotend Replacement for Bambu Lab P2S, 4 Sizes 0.2 0.4 0.6 0.8mm | 4 Distinct Nozzle Sizes, Hardened Steel and All Metal Heat Break, Preinstalled Silicone Sleeve, No Wiring or Stripping Needed
$39.99

LEOWAY P1P P1S Hotend Complete Kit with 0.4mm Hardened Steel Nozzle | Full Assembly Hardened Steel Hotend , Ceramic Heater, Thermistor, Cooling Fan, For Bambu Lab P1P/P1S 3D Printer
$32.99

LEOWAY P2S Hotend Heating Assembly Kit for Bambu Lab P2S 3D Printer | Ceramic Zirconia Heat-Insulating Base, Quick-Change Design, With Heater Cartridge & Thermistor
$36.99

iSANGHU Matte PLA Filament, High Speed PLA 1.75mm, Macaron Color 3D Printer Filament, 1 KG/Spool, Fast Printing Supports Printing Speeds from 30 to 300mm/s
$32.99

YOOPAI PTFE Teflon Tubing 5M with Cutter, 2.5mm ID × 4mm OD PTFE Teflon Tube Fits Direct Drive Extruder 3D Printer, for A1/A1 mini/P1P/P1S/X1C, K1/K1 Max/Ender 3 V3 (White)
$19.99

LEOWAY All-Metal Extruder Gear Kit for P1P, P1S, X1C 3D Printers | Upgrade DLC Nano-Coated Hardened Steel, Self-Lubricating Brass Helical Extrusion Gear
$36.54