1 / 6Creality Sprite Extruder Pro Kit, all-metal direct drive
Creality Sprite Extruder Pro Kit is an all-metal direct-drive extruder upgrade for selected Ender-series printers. Its dual-gear feed and high-temperature hotend are aimed at users seeking flexible-filament support, but compatibility and installation requirements vary by printer model.
At a glance
- Dual-gear direct-drive design with a stated 3.5:1 reduction ratio and up to 80N extrusion force, depending on filament.
- Manufacturer lists a high-temperature hotend rating of ≤ 300℃ and support for a range of filaments including TPU.
- Compatibility notes specify added firmware or hardware conditions for some Neo models.
Often bought together
Pros and cons
Pros
- Direct-drive dual-gear feeding is intended to give more controlled filament feeding and withdrawal.
- The listed filament range includes flexible TPU as well as PLA, PETG, ABS, PA and PC.
- The listing says a short cable for BL Touch or CR Touch connection is included.
Technical specifications
14 specifications| Brand | Creality |
|---|---|
| Model | AMUS-CU-3D-AC-Sprite-AllMetal |
| Drive | Dual Gear Drive |
|---|---|
| Rated voltage | 1.4VDC |
| Rated current | 0.8A |
| Maximum extrusion force | 80N (depending on filament) |
| Reduction ratio | 3.5:1 |
| Hotend temperature rating | ≤ 300℃ |
| Withdrawal distance | Max 3mm |
| Supported filaments | PLA, PETG, ABS, PA, PC, TPU, etc. |
| Supported filament diameter | 1.75 ± 0.05mm |
| Dimensions listed | 6.43 x 5.4 x 5 cm; 288 Grams |
|---|---|
| Weight listed | 288 g |
| Listed compatible models | Ender 3 / Ender 3 V2 / Ender 3 Pro / Ender 3 MAX / Ender 3 S1 / Ender 3 Plus / Ender 3 Neo / Ender 3 MAX NEO / Ender 3 V2 NEO / CR-10 Smart Pro |
What to know before buying
Listing details to confirm
The compatibility information is not uniform: Ender 3 S1 and CR-10 Smart Pro can use only the extruder components, not the supplied connecting wires or mounting brackets. Ender-3 MAX NEO and Ender-3 NEO require a 4.2.7 motherboard and firmware flashing, while Ender-3 V2 NEO also requires a limit-switch bracket. Customer feedback also reports Ender 3 Neo compatibility concerns, so confirm the exact printer revision and required parts before purchase. The dimensions line gives a weight of 288 Grams, while a separate weight field says 288 g, and the listing's model compatibility wording varies.
Who is it for?
A good fit for
- Ender-series owners checking a model-specific upgrade for direct-drive feeding and flexible filament use.
- Users who are prepared to confirm their printer's motherboard, wiring, bracket and firmware requirements before installation.
Less suited to
- Buyers who need a plug-and-play kit confirmed for their exact printer revision without additional firmware or hardware checks.
- Users who need established long-term reliability, as customer feedback includes reliability concerns.

Customer reviews on Amazon
- 5 stars
72% 72% - 4 stars
11% 11% - 3 stars
5% 5% - 2 stars
2% 2% - 1 star
10% 10%
Customer feedback describes installation and print quality positively, including a report of improved PETG printing at higher temperatures. Views on value are mixed, while compatibility problems, particularly with Ender 3 Neo, and reliability concerns are also reported. Those concerns make model-specific fit and firmware checks important, especially for buyers choosing the kit for higher-temperature or flexible-filament printing.
Positive themes
- Customers describe the extruder as easy to install and report positive print-quality results.
Negative themes
- Feedback reports compatibility problems with Ender 3 Neo and reliability concerns, including one report of the unit stopping after three months.
Mixed feedback
- Customers disagree on whether the upgrade is worth its cost.
Frequently asked questions
Which printers does the listing say this kit supports?
It lists Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 MAX, Ender 3 S1, Ender 3 Plus, Ender 3 Neo, Ender 3 MAX NEO, Ender 3 V2 NEO and CR-10 Smart Pro. Conditions differ for some models, so verify the exact requirements before ordering.
Can this extruder be used with TPU?
The listing includes TPU among its supported filaments. Actual installation and operation still depend on the printer and correct firmware configuration.
Do all listed printers use every part in the kit?
No. The listing says only the extruder components can be used on Ender 3 S1 and CR-10 Smart Pro, and their included wires and mounting brackets cannot be used. Neo variants have separate motherboard, firmware or bracket requirements.
What temperature does the hotend support?
The product specification lists the hotend as ≤ 300℃. This is a manufacturer-listed rating, not an independently verified measurement.

Alternative options

Official Creality Sprite Extruder Pro Kit, Direct Drive Extruder, Ender 3 Extruder, All Metal Dual Gear Feeding Design for Ender-3/Ender-3 Pro/Ender-3 MAX/Ender-3 V2/Ender 3 S1/CR 10 Smart Pro
$103.50

Sprite Direct Drive Extruder Pro Kit All Metal Extruder Upgrade Kit | For Ender 3/Ender 3 v2/Ender 3 Pro/Ender 3 Max 3D Printer, Dual Gear Dual Fan Design, Support BL Touch/CR Touch
$109.99

Creality Upgraded Sprite Extruder SE NEO Kit, Direct Drive Extruder, Upgrade Dual Gear Feeding Design for Ender-3 V2 Neo/Ender-3 Neo/Ender-3 Max Neo/Ender-2 Pro
$42.32

Official Creality Ender 3 Direct Drive Upgrade Kit, Ender 3 V2 Upgrades for Ender 3, Ender 3 Pro, Ender-3S 3D Printer with Stepper Motor Hotend Kit 1.75mm Extruder Fan and Cables Support TPU Filament
$50.39

Creality Official Ender 3 Direct Drive Upgrade Kit, Original Comes with 42-40 Stepper Motor Hotend Kit, 1.75mm Direct Drive Extruder Fan and Cables Support Flexible TPU Filament
$46.74

Creality K2 Combo (A) 3D Printer with CFS, 4-Colour Printing | Enclosed CoreXY, Up to 600mm/s, Auto Bed Levelling, AI Camera Monitoring, 260x260x260mm Build Volume
$699.00

Creality Upgraded Epoxy Resin Printing Platform 235 * 235mm, Magnetic Flexible Steel Plate, 3D Printer Platform for Ender-3 SE/3 KE/K1/Ender-3 S1/5 S1/3 S1Pro/3/3 Pro/3S/3V2/Ender-5/5S/5Pro
$22.00

Creality Upgraded Sprite Extruder SE Kit, Direct Drive Extruder, Upgrade Dual Gear Feeding Design for Ender-3/Ender-3 V2/Ender-3 Pro/Ender-5/Ender-5 Pro/Ender-5 PIus/CR-10
$42.30

LEOWAY P1P P1S Hotend Complete Kit with 0.4mm Hardened Steel Nozzle | Full Assembly Hardened Steel Hotend , Ceramic Heater, Thermistor, Cooling Fan, For Bambu Lab P1P/P1S 3D Printer
$32.99

Creality Upgraded Ender-3 Linear Rail Guide Kit MGN12 320mm - High Precision, High Speed Printing, and Long Service Life - Easy to Modify, Compatible with Ender-3, Ender-3 Pro, Ender-3 V2
$42.29

Creality Original Sprite Extruder Pro Heating Block Kit, High Temperature 300℃ Titanium Heatbreak Plated Copper Nozzle, Compatible with Ender-3S1/Ender-3S1 Pro/Plus, CR-10 Smart Pro 3D Printer
$31.49

Creality Space Pi Filament Dryer Plus, 2 Spools Filament Storage Box, Double 360° Heating Drying with Fan&Touch Screen, 3D Printer Filament Spool Holder, Dehydrator 1.75/2.85/3mm PLA PETG ABS TPU
$118.99
