Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

BRIMETI 12V 60W LED Transformer, 5A, IP67

The BRIMETI 12V 60W LED Transformer is a constant-voltage supply for 12V DC LED strips and other LED lamps. Its stated 60W maximum load and 5A output suit a modest lighting load, while the listing also claims an IP67 enclosure and says the unit is not dimmable.

At a glance

  • Constant-voltage 12V DC output for compatible LED lighting.
  • The stated 60W maximum load and 5A output define the listing's capacity.
  • The listing claims IP67 waterproofing and an aluminium alloy housing.
  • Not dimmable, according to the product details.
Price
$14.44Save 15%

Reference price: $16.99

Price checked: 18 Nov 2026

View offer

Often bought together

Pros and cons

Pros

  • A clearly stated 12V DC output and 60W maximum load make it easier to compare against a compatible lighting load.
  • Slim stated 20mm thickness may help where installation space is limited.
  • Listing describes overvoltage, overheating, overcurrent and short-circuit protection.

Cons

  • It is explicitly not dimmable, so it is unsuitable for setups that require dimming through this driver.

Technical specifications

14 specifications
Identity
BrandBRIMETI
Model12V 60W
Electrical
Input85-260V, 50/60Hz
Output voltage12V
Output current5 Ampere
Maximum load60 watts
DimmingNOT dimmable!
Construction and installation
Waterproof ratingIP67
Housing materialAluminum alloy
Mounting types listedSurface Mount
Dimensions3 * 2 * 10,8 cm
Input and output wire length12 cm / 4.72 inches
Thickness20mm
Protection claims
Listed protectionsovervoltage, overheat, overcurrent, and short circuit

What to know before buying

Listing details to confirm

The listing describes installation in a ventilated dry location or hanging on a wall while also claiming IP67 waterproofing and outdoor suitability. Confirm the intended placement and protection requirements before installation. Its 12 cm leads are short, and the specified maximum load is 60 watts.

What’s in the box

Included
  • LED transformer

Who is it for?

A good fit for

  • Buyers powering a compatible 12V DC LED strip or other LED lamps within the stated 60W maximum load.
  • Installations where a slim driver and claimed IP67 enclosure are useful, subject to confirming placement and wiring requirements.

Less suited to

  • Lighting setups that require dimming through the power supply.
  • Loads exceeding the stated 60W maximum or lighting that does not use compatible 12V DC input.
BRIMETI 12V 60W LED Transformer, 5A, IP67 · photo 2
Additional product photo 2

Customer reviews on Amazon

5 / 5 · 2 ratings
  • 5 stars100%100%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

The supplied rating data is entirely five-star, but it comes from only a very small number of ratings and includes no written feedback. It cannot establish reliability or explain customer experience. For buyers, the stated 12V DC output and 60W ceiling are more useful for judging fit than this limited rating signal.

Frequently asked questions

Can this driver dim LED lights?

No. The listing explicitly states that it is not dimmable.

What output and load does it provide?

The listing specifies a constant 12V DC output, 5 Ampere output current and a maximum load of 60 watts. Keep the connected load within that stated limit.

Is it suitable for outdoor installation?

The listing claims IP67 waterproofing and describes outdoor use, but also recommends a ventilated dry location or wall hanging. Confirm the installation conditions and protection required for your location.

What should I check before wiring it?

Check compatibility with a 12V DC constant-voltage load and note that the listed input and output leads are 12 cm / 4.72 inches long. The listing identifies red as positive and black as negative on the output.

BRIMETI 12V 60W LED Transformer, 5A, IP67 · photo 3
Additional product photo 3

Alternative options

Product details in Markdown