1 / 7Bambu Lab ABS Yellow 3D Printer Filament, 1.75 mm, 1 kg
Printer: Bambu Lab ABS filament is a yellow, 1.75 mm refill intended for functional parts and prototypes where the listing’s claimed toughness, heat resistance and water resistance are relevant. It is supplied without a spool, and ABS printing calls for ventilation and care with warping.
At a glance
- The manufacturer describes the ABS as tough and impact-resistant for functional parts and prototypes.
- RFID printing parameters are claimed to be readable by Bambu Lab AMS systems.
- A reusable spool is mentioned, but this refill arrives without one and needs to be installed on a spool.
- Listing guidance warns of pungent printing odours and potential warping on large or high-infill prints.
Often bought together
Pros and cons
Pros
- ABS is presented for durable functional prints, with manufacturer claims of heat, moisture and impact resistance.
- The stated 1.75 mm diameter and 1 kg quantity suit buyers seeking a standard-size refill.
- AMS RFID parameter reading is claimed for compatible Bambu Lab equipment.
Cons
- The refill is supplied without a spool, so a reusable spool or a self-printed spool is needed before use.
- ABS printing requires attention to ventilation, drying and warping, particularly for large or high-infill models.
Technical specifications
12 specifications| Brand | Bambu Lab |
|---|---|
| Model | B00-Y1-1.75-1000-SPLFREE |
| Material listed | Acrylonitrile Butadiene Styrene |
|---|---|
| Colour | Yellow |
| Additional features | Heat & Water Resistant |
| Diameter | 1.75 Millimeters |
|---|---|
| Number of items | 1 |
| Weight listed | 2.54 Pounds |
|---|
| Heat Deflection Temperature | 87°C |
|---|---|
| Drying conditions | 80℃ for 8 hrs. |
| Compatible printers listed | Bambu Lab X1 Series Bambu Lab P1S 3D Printer |
| Warranty description | 1 Year Manufacturer |
|---|
What to know before buying
- The manufacturer says to print in a well-ventilated area because pungent odours may be released. It advises drying at 80℃ for 8 hrs., storing dry, and drying again before use if the filament absorbs moisture. For warping, it recommends avoiding large or high-infill prints, using an enclosure and properly glued build plate, and using lower print speed with a higher heatbed temperature.
Listing details to confirm
The listing’s title says a reusable spool is included, while its product note says the filament is packaged without a spool. The body weight is listed as 2.54 Pounds while the stated filament quantity is 1 kg. Confirm the selected listing’s spool contents and weight details before buying.
Who is it for?
A good fit for
- Bambu Lab AMS users interested in RFID-based parameter loading, subject to printer and system compatibility.
- Makers printing functional parts or prototypes who can manage ABS ventilation, drying and warping considerations.
- Buyers who already have a compatible reusable spool or can print one.
Less suited to
- People who need filament ready to load without transferring it onto a spool.
- Users who cannot print in a well-ventilated area or manage ABS warping precautions.
- Buyers seeking a listing that clearly confirms the delivered spool configuration.

Customer reviews on Amazon
- 5 stars
81% 81% - 4 stars
10% 10% - 3 stars
3% 3% - 2 stars
3% 3% - 1 star
3% 3%
Aggregate ratings are mostly five-star, with a smaller spread across lower star categories. With no review-summary evidence, they do not establish why customers rated the filament as they did or confirm its printing performance. Buyers should weigh the listed ABS printing precautions and unresolved spool wording against their own setup.
Frequently asked questions
Does this refill include a spool?
The title mentions a reusable spool, but the product note says the filament is packaged without one. It says to install the refill on a previously used spool or a self-printed spool. Confirm the selected listing’s package details.
What printing precautions does the listing give?
It warns that printing may release pungent odours and recommends a well-ventilated area. It also notes ABS can warp on large or high-infill models and gives enclosure, bed adhesion, speed and heatbed guidance.
What is the stated drying guidance?
The listing specifies 80℃ for 8 hrs. It also advises dry storage and drying before use if the material has absorbed moisture.
Which printers are named as compatible?
The listing names the Bambu Lab X1 Series and Bambu Lab P1S. It also claims RFID parameters can be read through AMS. Check compatibility with your specific printer and setup.

Alternative options

Bambu Lab PLA Matte 3D Printer Filament 1.75mm RFID 1kg with Spool, Charcoal
$35.69

Bambu Lab PAHT CF 3D Printer Filament 1.75mm RFID 1kg with Spool, Black | MakerWorld Model Library, High Mechanical Properties, Layer Adhesion, Low Moisture Absorption, AMS-Compatible 3D Material
$131.74

AXVVA PLA+ 3D Printer Filament 1.75mm Sunflower Yellow 1KG | AMS Compatible, High Precision, Strong Toughness, Odorless, Better Flow for Most FDM 3D Printers
$23.68

for Bambu Labs X2D Build Plate for Bambu Lab A1 Plate A1 Build Plate, for Bambu Textured PEI Plate for Bambu Lab P1S Build Plate for Bambu P2S Build Plate Holographic Build Plate 257x257mm
$27.99

Creality Space Pi Filament Dryer Plus, 2 Spools Filament Storage Box, Double 360° Heating Drying with Fan&Touch Screen, 3D Printer Filament Spool Holder, Dehydrator 1.75/2.85/3mm PLA PETG ABS TPU
$118.99

Creality 3D Printer Filament, PLA Filament 1.75mm Bundle 2Kg for 3D Printing, Ender PLA Filament No-Tangling, Strong Bonding & Overhang Performance, Accuracy +/- 0.02mm (Black & Black 2-Pack)
$36.53

Sovol 3D Printer Filament PLA Silk Tri Color Rose Blue Yellow 3 in 1 Coextrusion Multicolored, Dimensional Accuracy +/-0.03mm, 1kg/2.2lbs
$28.99

Bambu Lab PLA 3D Printer Filament 1.75mm RFID 1kg with Spool, White | MakerWorld Model Library, No Warping & Tangling, AMS-Compatible 3D Print Material,Fast Printing
$41.99

Soleyin Ultra PLA Filament 1.75mm, Pineapple Yellow PLA 3D Printer Filament, High Speed Printing Up to 600mm/s, Dimensional Accuracy ±0.02mm, Easy to Print, 1kg Spool for FDM 3D Printers
$26.99

Bambu Lab PLA 3D Printer Filament 1.75mm RFID 1kg with Spool, Black | MakerWorld Model Library, No Warping & Tangling, AMS-Compatible 3D Print Material,Fast Printing
$35.68

























