Aussie Deal ScoutDeals for Australia
Search
Product guide

Ampper Am-CBS01 Battery Disconnect Switch, 275 A

Ampper Am-CBS01 is an on/off battery disconnect switch described for vehicle, RV and boat electrical systems. Its listing claims 275 A continuous operation at DC 12V and compatibility with DC 12–48 V systems, but buyers should confirm the rating and fit for their specific installation.

At a glance

  • Two-position on/off switching is intended to isolate a battery when a vehicle or boat is not in use.
  • The listing gives separate continuous, intermittent and momentary current ratings, all specifically stated for DC 12V.
  • The listing says it can stand alone or lock together with another switch.
Price
$16.99Save 15%

Reference price: $19.99

Price checked: 18 Nov 2026

View offer

Pros and cons

Pros

  • Simple on/off isolation suits installations where a basic battery cut-off is needed rather than battery selection.
  • Separate current ratings make the stated operating categories clearer than a single current figure.
  • Customer feedback reports straightforward installation and useful disconnection in some applications.

Cons

  • Customer feedback raises durability concerns, including reports that the switch did not hold up to its stated rating.

Technical specifications

23 specifications
Identity
BrandAmpper
ModelAm-CBS01
Electrical ratings and operation
Operating voltage in details12 Volts (DC)
System compatibility claimedDC 12 - 48 V systems
Continuous rating at DC 12V275 A continuous at DC 12V
Intermittent rating at DC 12V455 A Intermittent at DC 12V
Momentary rating at DC 12V1250 A momentary at DC 12V
OperationON-OFF
Positions2
Contact typeNormally Open
Circuit type2-way
Terminals and construction
Connector typeScrew
Copper terminal studs3/8" (10 mm) x 2
Housing materialAcrylonitrile Butadiene Styrene, Plastic
Contact materialCopper
Protection rating listedIP65
Connectivity and controls
Wireless connection listedWi-Fi
Control methods listedPush Button
Switch typeToggle
Dimensions and installation
Mounting typeSurface Mount
Dimensions7 x 9.5 x 7.5 centimetres
Weight9.34 Ounces
Mounting holes claimed4 mounting screw holes

What to know before buying

Listing details to confirm

The listing is internally inconsistent: it describes toggle and push-button controls, gives both 12 Volts (DC) and DC 12–48 V system compatibility, and lists Wi-Fi for a manual battery switch. Treat these control, connectivity and voltage details as unconfirmed. Current ratings are stated at DC 12V only, so do not assume the same ratings at higher system voltages. Verify the required current rating and installation compatibility for your system.

Who is it for?

A good fit for

  • Vehicle, RV or boat owners seeking a manual on/off battery isolation switch.
  • Installations where the listed DC 12V current ratings match the application and a surface-mounted unit is suitable.

Less suited to

  • Buyers needing a substantiated wireless or Wi-Fi-controlled switch.
  • Applications that require confirmed current ratings above DC 12V or verified durability at the specified load.
Ampper Am-CBS01 Battery Disconnect Switch, 275 A · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 8,414 ratings
  • 5 stars78%78%
  • 4 stars15%15%
  • 3 stars4%4%
  • 2 stars1%1%
  • 1 star2%2%

Customer feedback reports that the switch works well for some buyers, with positive comments about material quality, installation and disconnection. One use mentioned is a solar-panel system for off-grid camping. Other feedback raises durability concerns, including reports that it did not hold up to its rating, and battery isolation experiences are mixed. These experiences matter because the listing's current ratings are specific to DC 12V and do not establish performance at other voltages or prove durability under a particular load.

Positive themes

  • Feedback describes the switch as simple to install and reports effective disconnection in some uses.

Negative themes

  • Feedback includes durability concerns and reports that the switch did not hold up to its rating.

Mixed feedback

  • Experiences with the battery isolation function are mixed.

Frequently asked questions

What current ratings does the listing give?

It claims 275 A continuous, 455 A intermittent and 1250 A momentary, each at DC 12V. Confirm the rating needed for your system before installation.

Is this switch suitable for a 12–48 V system?

The listing claims compatibility with DC 12–48 V systems, but its separate current ratings are stated at DC 12V. Confirm suitability and ratings for the voltage and load you plan to use.

Does it have Wi-Fi control?

Wi-Fi appears in the specifications, but the listing also describes manual on/off and toggle or push-button controls. Wireless operation is unconfirmed.

What comes in the package?

The description claims one battery switch and four sets of mounting bolts. Check the selected listing because the package contents are not independently confirmed here.

Ampper Am-CBS01 Battery Disconnect Switch, 275 A · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.5
INNOSURE Tempered Glass Protector for Yamaha 5-Inch Motorcycle Screens
INNOSURE Tempered Glass Protector for Yamaha 5-Inch Motorcycle Screens

A$41.35

A$34.80

-16%
-16%

Offer details

  • Amazon Prime savings offer
Product details in Markdown