Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools

Sovol SH01 SV-SH01-1 is a filament dryer and storage box intended for 3D printing spools. Its listing describes selectable 40 °, 45 ° and 50 ° C settings, real-time temperature and humidity display, and capacity for two narrower spools or one wider spool.

At a glance

  • Displays temperature and humidity inside the box in real time, according to the listing.
  • The built-in fan is claimed to distribute heat more evenly.
  • The stated spool capacity is two rolls under 70 mm wide, or one roll under 150 mm wide.
  • PTFE plugs should be opened during heating to let moisture evaporate. The listing also claims sealed, unpowered filament storage.
Price
$58.13Save 15%

Reference price: $68.39

Price checked: 18 Nov 2026

View offer

Often bought together

Pros and cons

Pros

  • Two-spool capacity suits users who want to dry or store more than one narrow roll at a time.
  • Temperature and humidity readouts provide in-box monitoring while drying.
  • The listing gives three temperature choices and drying times from 6 to 12 hours.

Cons

  • The highest selectable temperature stated in the listing is 50 °C, which may not suit buyers seeking higher-temperature drying.

Technical specifications

9 specifications
Identity
BrandSovol
ModelSV-SH01-1
Drying and capacity
Temperature settings40 °, 45 °, 50 ° C
Drying time setting6 hours to 12 hours
Capacity2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm
Filament diameter listed1.75 Millimeters
Dimensions and installation
Weight listed1.4 Kilograms
Materials and protection
Material listedMultiple (PLA, PETG, ABS, TPU)
SealsSilicone & PTFE seal

What to know before buying

  • For heating, open the PTFE plugs on top for moisture to escape. After setting temperature and time with the M button, press M again to start operation.

Listing details to confirm

The listing says the box may not reach 50℃ in rooms below 16℃, while stating this does not reduce drying effect. Listing details are inconsistent about the recommended sealing state: it claims the seals keep filament dry during printing and storage without power, but instructs users to open the PTFE plugs during heating. Customer feedback also mentions mixed experiences with moisture removal, airtightness, temperature control and durability, including a report of failure after two months. Confirm that the stated 50 °C maximum and operating instructions suit your use.

Who is it for?

A good fit for

  • 3D-printing users who want a dryer with space for two spools narrower than 70 mm, or one spool narrower than 150 mm.
  • Buyers who want selectable drying settings and an in-box temperature and humidity display.
  • Users printing with the listed PLA, PETG, ABS or TPU materials.

Less suited to

  • Users who need a dryer with a stated maximum above 50 °C.
  • Buyers who require consistently airtight storage while the box is actively heating, as the listing instructs opening the plugs during drying.
Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 2,652 ratings
  • 5 stars68%68%
  • 4 stars21%21%
  • 3 stars5%5%
  • 2 stars2%2%
  • 1 star4%4%

Customer feedback highlights perceived good quality, ease of use and value, but reports are mixed on the 50 °C temperature ceiling, moisture removal and airtightness, fan noise, and durability, including one report of failure after two months. For users whose filament and drying needs fit the listed settings, the readouts and two-spool capacity are relevant, but the reports reinforce the importance of the 50 °C limit and the instruction to open the plugs during heating.

Positive themes

  • Customers describe the dryer as good quality and simple to use.
  • Customers also report positive value for money.

Negative themes

  • Airtightness receives negative feedback, with users reporting a need to open the lid slightly for ventilation.

Mixed feedback

  • Feedback is mixed about temperature control, moisture removal, noise and durability.
  • The supplied summary includes one report that the unit broke within two months.

Frequently asked questions

How many spools can the Sovol SH01 hold?

The listing says it holds two rolls each under 70 mm wide, or one roll under 150 mm wide.

What temperature and time settings are listed?

Temperature settings are 40 °, 45 ° and 50 ° C, with time adjustable from 6 hours to 12 hours.

Should the seals stay closed while the SH01 heats?

No. The listing instructs users to open the PTFE plugs during heating so moisture can escape. It separately claims sealed storage when the unit is not powered.

What do customers report about using it?

Feedback describes the dryer as easy to use and good quality, but reports are mixed on temperature control, moisture removal, airtightness, noise and durability. The supplied summary includes one report of failure after two months.

Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools · photo 3
Additional product photo 3

Alternative options

Product details in Markdown