# Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools

Sovol SH01 SV-SH01-1 is a filament dryer and storage box intended for 3D printing spools. Its listing describes selectable 40 °, 45 ° and 50 ° C settings, real-time temperature and humidity display, and capacity for two narrower spools or one wider spool.

- [Original product page](https://aussiedealscout.com/product/sovol-sh01-two-spool-filament-dryer)
- [View offer](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)
- Market: AU
- Language: en-AU
- Currency: AUD
- Brand: Sovol
- Model: SV-SH01-1
- Price: 58.13 AUD
- Previous price: 68.39 AUD
- Discount: 15%
- Price checked: 2026-11-18T08:54:11.073Z
- Rating: 4.4 / 5
- Reviews: 2652

Prices and deal status are the latest recorded data, not a guarantee of availability. Confirm the price and availability with the store.

## At a glance

- Displays temperature and humidity inside the box in real time, according to the listing.
- The built-in fan is claimed to distribute heat more evenly.
- The stated spool capacity is two rolls under 70 mm wide, or one roll under 150 mm wide.
- PTFE plugs should be opened during heating to let moisture evaporate. The listing also claims sealed, unpowered filament storage.

## Pros

- Two-spool capacity suits users who want to dry or store more than one narrow roll at a time.
- Temperature and humidity readouts provide in-box monitoring while drying.
- The listing gives three temperature choices and drying times from 6 to 12 hours.

## Cons

- The highest selectable temperature stated in the listing is 50 °C, which may not suit buyers seeking higher-temperature drying.

## Specifications

### Identity
- Brand: Sovol
- Model: SV-SH01-1
### Drying and capacity
- Temperature settings: 40 °, 45 °, 50 ° C
- Drying time setting: 6 hours to 12 hours
- Capacity: 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm
- Filament diameter listed: 1.75 Millimeters
### Dimensions and installation
- Weight listed: 1.4 Kilograms
### Materials and protection
- Material listed: Multiple \(PLA, PETG, ABS, TPU\)
- Seals: Silicone & PTFE seal

## Before you buy

- For heating, open the PTFE plugs on top for moisture to escape. After setting temperature and time with the M button, press M again to start operation.
- The listing says the box may not reach 50℃ in rooms below 16℃, while stating this does not reduce drying effect.
- Listing details are inconsistent about the recommended sealing state: it claims the seals keep filament dry during printing and storage without power, but instructs users to open the PTFE plugs during heating. Customer feedback also mentions mixed experiences with moisture removal, airtightness, temperature control and durability, including a report of failure after two months. Confirm that the stated 50 °C maximum and operating instructions suit your use.

## A good fit for

- 3D-printing users who want a dryer with space for two spools narrower than 70 mm, or one spool narrower than 150 mm.
- Buyers who want selectable drying settings and an in-box temperature and humidity display.
- Users printing with the listed PLA, PETG, ABS or TPU materials.

## Less suited to

- Users who need a dryer with a stated maximum above 50 °C.
- Buyers who require consistently airtight storage while the box is actively heating, as the listing instructs opening the plugs during drying.

## Customer feedback

Customer feedback highlights perceived good quality, ease of use and value, but reports are mixed on the 50 °C temperature ceiling, moisture removal and airtightness, fan noise, and durability, including one report of failure after two months. For users whose filament and drying needs fit the listed settings, the readouts and two-spool capacity are relevant, but the reports reinforce the importance of the 50 °C limit and the instruction to open the plugs during heating.
- Positive themes: Customers describe the dryer as good quality and simple to use.
- Positive themes: Customers also report positive value for money.
- Negative themes: Airtightness receives negative feedback, with users reporting a need to open the lid slightly for ventilation.
- Mixed feedback: Feedback is mixed about temperature control, moisture removal, noise and durability.
- Mixed feedback: The supplied summary includes one report that the unit broke within two months.

### Rating distribution

- 5 stars: 68%
- 4 stars: 21%
- 3 stars: 5%
- 2 stars: 2%
- 1 star: 4%

## Frequently asked questions

### How many spools can the Sovol SH01 hold?
The listing says it holds two rolls each under 70 mm wide, or one roll under 150 mm wide.
### What temperature and time settings are listed?
Temperature settings are 40 °, 45 ° and 50 ° C, with time adjustable from 6 hours to 12 hours.
### Should the seals stay closed while the SH01 heats?
No. The listing instructs users to open the PTFE plugs during heating so moisture can escape. It separately claims sealed storage when the unit is not powered.
### What do customers report about using it?
Feedback describes the dryer as easy to use and good quality, but reports are mixed on temperature control, moisture removal, airtightness, noise and durability. The supplied summary includes one report of failure after two months.

## Alternative options

- [Creality Official 2026 New Space Pi V2 Plus Filament Dryer, 2 Rolls 3D Printer Dryer Box Upgraded PTC Heating, 360° Real-Time Humidity Monitor, 75°C Faster Drying for 1.75/2.85mm PLA PETG ABS TPU PP](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)
- [2026 Upgraded Creality Space Pi V2 Plus Filament Dryer, 2-Roll 160W PTC \| with 75℃ High-Temp, 360° Hot-Air Circulation, 2nd-Gen Smart Sensor & Touch Control for PLA ABS PETG1.75/2.85mm Filament](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)
- [Creality Space Pi Filament Dryer Plus, 2 Spools Filament Storage Box, Double 360° Heating Drying with Fan&Touch Screen, 3D Printer Filament Spool Holder, Dehydrator 1.75/2.85/3mm PLA PETG ABS TPU](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)
- [AUTENS 25L 3D Printer Filament Dryer Box, Holds 5 Rolls \| Humidity Control for Filament Storage, Transparent Glass, Aluminum Alloy, Noiseless/Stackable, for PLA/ABS/PETG](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)
- [eSUN eBOX Lite 3D Filament Dryer Box Drying Filaments Storage Box Keeping Filament Dry Holder Free 3D Printing Tools…](https://aussiedealscout.com/visit/esun-ebox-lite-3d-filament-dryer-box)
- [Creality Official 3D Printer Stand, CFS Workstand Filament Dryer Holder, Space-Saving Dual-Layer Pull-Out Shelves, 30kg Capacity Anodized Aluminum Bracket for Holds 3D Printers/Filament Dryer/CFS](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)
- [3D Printer Enclosure for A1 Mini, Large Transparent Window Enclosure with LED Light, Fireproof Dustproof Noise Reduction Constant Temperature 3D Printer Cover, 470x550x550MM](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)
- [Creality Official 2026 New Upgrade Filament Dryer Box Pro, Space Pi SE with High PTC Efficiency & Precision Sensor for 1KG Spools 45~65℃, 3D Printer Filament Dehydrator for PLA PETG ABS ASA TPU](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)
- [Creality SpacePi X4 Filament Dryer Box, 4-Spools 3D Printer Storage Box, Dual Heating Chambers, 200W PTC Heats Up to 85°C Maximum Efficiency](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)
- [Sovol 3D Printer Filament PLA Silk Tri Color 1.75mm 1KG Bronze Purple Green \| 3 in 1 Co-extrusion, +/-0.03mm High Precision Strong Toughness Wiring Tightness](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)

## Add-ons

- [Sovol White PTFE Tube 5M/16.4ft Length, 2.5mm ID 4mm OD, with 2 Couplers & Tubing Cutter for Bambu lab X1/ X1C/ P1P/ P1S/ A1/](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)
- [Creality PLA Filament 1.75mm, 3D Printer Filament, 1.0kg \(2.2lbs\) Spool, No Warp Enhanced Toughness, Dimensional Accuracy ±0.](https://aussiedealscout.com/visit/sovol-sh01-two-spool-filament-dryer)

## Images

![Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools — 1](https://aussiedealscout.com/i/yd7QobGkGYeEhjW_Tudafiw7uHBBZE0FS0IhtDo9_wC3wtBesjWsMMuQILwvG7VEmwBmVXev2x0hrfXpNVmhWq3k8OaiSoJhLcx_mn3TUNprR8vFYiQpwJg7.jpg)

![Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools — 2](https://aussiedealscout.com/i/B5sgZu_jP8uTMxY8Q1GK4fwoVqzem9xiM2P8IPjoz4uu6oaSs7_ueajfXKYd-gp40ovec9FJtZ0-EGzfFI1kxbLpWNbMoPwDa5KDqWtosO6MoZcdINV-o-xr.jpg)

![Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools — 3](https://aussiedealscout.com/i/QqRB97uyWFlXiI_SLaumT9CcnFBSU-6wAFqF78de5PNhnZK0RICQ9c6FmGfzi9y0z24ryowTJs7U0pWQi4no41Ul13KqS3C4534cPAbbrZupqBTw3lwsxqKq.jpg)

![Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools — 4](https://aussiedealscout.com/i/i64fIGq70qNMYt2AT9d9etRisICh4-04FojH_NEGxki9pAOGe4U4Ce3ys5qANig1F-Mb8cccVtke3jTKG8WKHNeWJo9Eb2RsgN8nTnMfFw_XNet9Oh3BD7nS.jpg)

![Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools — 5](https://aussiedealscout.com/i/ay6DtEQJCXXgS2L5UFaXNW__95_wHrhRCFtzyvqXuMgY3vKhJakXztkzLrkjtDAzWXOPj2S4M4GMFq6EnBcX6HvIuy4XBEkZj8IFliK1ijw5SPQt7esNt8RR.jpg)

![Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools — 6](https://aussiedealscout.com/i/sTi25rDnLARZXClm02vDV_spnEp-fxFn8QI7anrLc80QW2NbkbDhYZl94h3VkcrUwV1DJd55P_icxGYr7LdPZbsOFJ2TVpbD5EpKkfAgh3xMABolXDUBpfn3.jpg)

![Sovol SH01 SV-SH01-1 Filament Dryer for 2 Spools — 7](https://aussiedealscout.com/i/612ouFqJaN0LL6ic4VOD9HPTOQvNVivwuli7imUQgBXAenT9ThPJWW47kQ0CH7ncTXMStYF-t8dC9XkvtulOl8a9emKIoAnPWW0No539UIqRLkKLkONvFYHS.jpg)
