Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Sorlaarti P1 Series Hotend with Removable 0.4 mm Hardened Steel Nozzle

Sorlaarti’s P1 Series hotend is a replacement assembly listed for Bambu Labs P1 Series 3D printers, with a removable 0.4 mm hardened steel nozzle. The listing says it does not include a cooling fan or retaining clip, so check whether those parts are needed for your installation.

At a glance

  • Heat sink, throat, heat block and removable nozzle are described as already assembled.
  • The listing says the ceramic heater and thermistor must be attached separately, or saved for future use.
  • The product description states the assembly has no cooling fan or retaining clip.
  • The listing specifies preheating to about 260℃ before replacing the nozzle and cautions users to protect their hands from heat.
Price
$18.99Save 17%

Reference price: $22.99

Price checked: 18 Nov 2026

View offer

Pros and cons

Pros

  • The removable hardened steel nozzle can be changed with the supplied wrench, according to the listing.
  • The heat sink, throat, heat block and nozzle are described as preassembled, reducing the assembly steps before fitting the heater and thermistor.

Cons

  • The described assembly is supplied without a cooling fan and retaining clip, which may limit suitability if your replacement requires those parts.

Technical specifications

3 specifications
Identity
BrandSorlaarti
Compatibility and nozzle
Compatible devicesBambu Labs P1 Series 3D printers
Dimensions and installation
Weight listed150 g

What to know before buying

Listing details to confirm

The listing is inconsistent about kit contents: it says there is no cooling fan or retaining clip, while claiming an assembled hotend, nozzle, ceramic heater, thermistor, silicone cover, wrench and thermal grease. Confirm the selected listing’s actual package contents before buying. Compatibility is claimed for the P1 Series and explicitly excluded for the X1 Series due to heater and thermistor variations. For nozzle replacement, the listing advises preheating to about 260℃ and protecting your hands from heat.

What’s in the box

  • Assembled hotend with removable 0.4mm hardened steel nozzleCheck selected pack
  • Ceramic heaterCheck selected pack
  • ThermistorCheck selected pack
  • Silicone coverCheck selected pack
  • WrenchCheck selected pack
  • Thermal greaseCheck selected pack
  • Cooling fanNot included
  • Retaining clipNot included

Check which accessories are included in your selected pack before buying.

Who is it for?

A good fit for

  • P1 Series owners seeking a replacement hotend with a removable 0.4 mm hardened steel nozzle.
  • Users who already have the required cooling fan and retaining clip, or do not need them for their installation.

Less suited to

  • X1 Series printer owners, as the listing states this hotend is not compatible.
  • Buyers who require a hotend assembly that definitely includes a cooling fan and retaining clip.
Sorlaarti P1 Series Hotend with Removable 0.4 mm Hardened Steel Nozzle · photo 2
Additional product photo 2

Frequently asked questions

Which printers is this hotend listed for?

The listing claims compatibility with Bambu Labs P1 Series 3D printers and says it is not compatible with the X1 Series. Check your printer and heater and thermistor configuration before buying.

Does it include a cooling fan?

The listing says the assembly is without a cooling fan and retaining clip. It also describes a kit, but the stated contents are inconsistent, so confirm what is included with the selected listing.

What is the nozzle size and material?

The listing specifies a removable 0.4mm hardened steel nozzle.

What does the listing advise for nozzle replacement?

It recommends preheating the hotend to about 260℃ and warns users to protect their hands from heat.

Sorlaarti P1 Series Hotend with Removable 0.4 mm Hardened Steel Nozzle · photo 3
Additional product photo 3

Alternative options

Product details in Markdown