1 / 7Lokkr SpacePi X4 Filament Dryer, 4 Spools
Spools: Lokkr SpacePi X4 is a four-spool filament dryer listing two independently controlled heating chambers and a maximum temperature of up to 85°C. Its claimed capacity and broad filament compatibility may suit multi-material printing, but the listing contains conflicting power and voltage details to clarify before purchase.
At a glance
- The listing claims room for four spools and simultaneous drying and printing.
- Two chambers are described as independently operated, allowing different temperature settings for different filament types.
- Active dehumidification and desiccant regeneration are claimed for filament storage.
- The stated supported spool limit is 200mm in diameter and 150mm in width.
Pros and cons
Pros
- Four-spool capacity can reduce the need to swap spools during multi-material or multi-colour workflows.
- Independent chambers offer flexibility when drying different filament types.
- The listed material range includes PLA, PETG, ABS, TPU, PC, PA and PAHT.
Cons
- The listed weight is 6.5 kilograms, so this is not a lightweight option to move around frequently.
Technical specifications
16 specifications| Brand | Lokkr |
|---|---|
| Listed model | SpacePi X4 Filament Dryer |
| Spool diameter | 200 Millimeters |
|---|---|
| Listed filament materials | PLA, PETG, ABS, TPU, PC, PA, PAHT |
| Supported filament diameters | 1.75mm/2.85mm |
| Supported spool dimensions | ≤200mm diameter, ≤150mm width |
| Spool size compatibility | 1kg/2kg spools |
| Heating chambers | two 200W PTC heating chambers |
|---|---|
| Maximum temperature | up to 85°C |
| Drying time | Adjustable (1-48 hours) |
| Power listed in description | 360W |
|---|---|
| Voltage listed in description | 220-240V or 100-120V, depending on region |
| Product dimensions listed | 382290270mm |
| Weight listed | 6.5 Kilograms |
| Housing claim | UL 94 V-0 flame-retardant housing |
|---|---|
| Safety features claimed | overheat, short-circuit, and dry-burn prevention |
What to know before buying
Listing details to confirm
Listing details are inconsistent or unconfirmed: it says two 200W heaters but lists 360W total power, gives multiple region-dependent voltage ranges without confirming the version supplied in Australia, and the listed dimensions lack separators or units. Confirm the selected model's power, voltage and dimensions before buying. The 85°C maximum and other performance and safety details are manufacturer claims, not independently verified here.
What’s in the box
Included- SpacePi X4 Filament Dryer
Who is it for?
A good fit for
- 3D printer users who want to dry and feed up to four spools at once.
- Users working with multiple listed filament types who want separately operated heating chambers.
- Buyers whose spools fit the stated maximum dimensions and who can confirm the local electrical configuration.
Less suited to
- Anyone who needs independently confirmed power, voltage or precise dimensions before purchase.
- Users who only need capacity for one or two spools.

Customer reviews on Amazon
- 5 stars
90% 90% - 4 stars
0% 0% - 3 stars
10% 10% - 2 stars
0% 0% - 1 star
0% 0%
Aggregate ratings lean strongly positive, with most recorded ratings in the five-star category and a smaller three-star portion. With no written feedback supplied, the ratings do not show what customers liked or criticised. Treat them as limited context rather than evidence of drying performance, particularly if you need the four-spool capacity or maximum temperature for a specific workflow.
Frequently asked questions
How many spools can the SpacePi X4 hold?
The listing claims capacity for four spools and says it can dry and print from four simultaneously. It also lists support for 1kg and 2kg spools within the stated size limits.
Which filaments does it support?
The listing names PLA, PETG, ABS, TPU, PC, PA and PAHT, and states support for 1.75mm and 2.85mm filament.
What should I check about the power supply?
The description lists two 200W heaters and 360W total power, while giving voltage ranges of 220-240V or 100-120V depending on region. Confirm the supplied Australian version's power and voltage before purchase.

Alternative options

Sovol Filament Dryer 2026, SH03 4 Spools Dry Box with 85℃ Max Temp | Dehydrator, Auto Dehumiditification, Dual Independent Heating Chambers for PLA PETG ABS TPU ASA PC PA 1.75/2.85mm
$144.49

Creality Space Pi X4 Filament Dryer 4 Roll 3D Printer Dry Box with 110W PTC Heater 360° Rapid Heating LCD Touch Screen One-Key Operation PLA PETG ABS TPU Nylon Compatible
$249.51

AUTENS 25L 3D Printer Filament Dryer Box, Holds 5 Rolls | Humidity Control for Filament Storage, Transparent Glass, Aluminum Alloy, Noiseless/Stackable, for PLA/ABS/PETG
$167.44

Chitu Systems E1 Filament Dryer 4 Spools, Dry Box with Auto Humidity Control, 10% More Energy Efficient, 4-Rolls 3D Printer Filament Dehydrator & Storage Box for 1.75mm PLA ABS TPU PETG
$203.99

Creality SpacePi X4L Filament Dryer, 4 Spools Dual Chamber Up to 75°C, LCD Touchscreen Moisture-Proof Storage for Multi-Color Printing
$195.00

Filament Storage Box for Bambu Labs P2S 3D Filament Dryer Box for Bambu Dry PLA Storage Airtight with Hygrometer for Bambu Lab P2S PLA Airtight -4 Pack for Sealing+4 Hygrometer+Label+Marker Pen, 4.0L
$42.99

Creality Official 2026 New Space Pi V2 Plus Filament Dryer, 2 Rolls 3D Printer Dryer Box Upgraded PTC Heating, 360° Real-Time Humidity Monitor, 75°C Faster Drying for 1.75/2.85mm PLA PETG ABS TPU PP
$139.99

Creality SpacePi X4 Filament Dryer Box, 4-Spools 3D Printer Storage Box, Dual Heating Chambers, 200W PTC Heats Up to 85°C Maximum Efficiency
$228.99

Fanttik F2 PRO Cordless Rotary Tool Kit,Engraving Pen,55 Accessories | Revostor Hub Rotary Tool Set with 5 Speed (25000rpm) for Grinding,3D Printed Sanding, Polishing, Drilling, Carving, Cutting
$150.00

Creality Official Raptor 3D Scanner for Automotive & Engineering Projects with Metrology-Grade 0.02mm Accuracy, 7 Blue Laser, Anti-Shake Tracking, Up to 60FPS Scanning Speed (Creality Scanner Raptor)
$1,699.00

2026 Upgraded Creality Space Pi V2 Plus Filament Dryer, 2-Roll 160W PTC | with 75℃ High-Temp, 360° Hot-Air Circulation, 2nd-Gen Smart Sensor & Touch Control for PLA ABS PETG1.75/2.85mm Filament
$126.65

Creality Official K2/K2 Pro/K2 Plus Extruder Kit, Original K2 Combo Dual Gears Extrusion Kit with Filament Break Sensor, 3D Printer Extruder Parts, Force Up to 80N for Filament Smooth Feed
$59.99