1 / 7Jiawu Ceramic Hotend Kit for Kobra 3
Jiawu’s ceramic hotend kit is listed for the Kobra 3 and Kobra 3 Combo, with a 0.4mm hardened steel nozzle and integrated terminal connector. The listing claims heating up to 400℃ and support for print speeds up to 600mm/s, but these are manufacturer claims rather than independently verified performance.
At a glance
- The listing describes a compact hotend module with an integrated terminal connector intended to simplify installation.
- A high-accuracy thermistor is claimed, alongside stable temperature control during printing.
- The listed filament range includes PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK and PEI.
Pros and cons
Pros
- The hardened steel nozzle and listed range of engineering filaments may suit users seeking an alternative to a basic nozzle setup.
- The integrated connector is intended to make the replacement a single-module installation.
Technical specifications
15 specifications| Brand | Jiawu |
|---|---|
| Part number | Jiawuw5rgepy8am |
| Product type | Upgrade Hotend Kit |
| Compatible printers | For Kobra 3, for Kobra 3 Combo |
|---|---|
| Material | CrZr Copper, Ti Alloy |
| Nozzle | 0.4mm Nozzle Material: Hardened Steel |
| Filament diameter | 1.75mm |
| Compatible filament | PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI, etc. |
| Maximum nozzle heating temperature | 400℃ |
|---|---|
| Supported print speeds | 600mm/s |
| Weight listed | 34 g |
|---|---|
| Package dimensions | 9 x 5 x 3 cm; 34 Grams |
| Installation | Direct installation and use |
| Batteries required | No |
|---|---|
| Country of origin | China |
What to know before buying
Listing details to confirm
The listing identifies the kit for Kobra 3 and Kobra 3 Combo and claims 400℃ heating and print speeds up to 600mm/s. These performance claims are not independently verified, so confirm printer compatibility and operating requirements before installation. The claimed filament range does not establish that every material is suitable for every printer setup.
Who is it for?
A good fit for
- Kobra 3 or Kobra 3 Combo owners looking for a replacement hotend with a hardened steel nozzle.
- Users whose printing plans involve the listed 1.75mm filament range and who can confirm printer and material requirements.
Less suited to
- Owners of printers other than the listed Kobra 3 and Kobra 3 Combo.
- Buyers needing independently verified temperature or high-speed performance specifications.

Customer reviews on Amazon
- 5 stars
64% 64% - 4 stars
36% 36% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
0% 0%
Only aggregate rating information is supplied, with a very small rating sample and a distribution limited to four- and five-star categories. This is too little to identify specific strengths, concerns or reasons for customer satisfaction. Buyers should assess the kit against the listed printer fit and treat the temperature and speed figures as manufacturer claims.
Frequently asked questions
Which printers is this hotend listed for?
The listing names the Anycubic Kobra 3 and Kobra 3 Combo. Confirm the exact printer revision and fit before ordering.
What nozzle and filament size are specified?
The listing specifies a 0.4mm hardened steel nozzle and a 1.75mm filament diameter.
Does the kit include a wrench?
The package list names one hotend kit and one wrench.
Are the 400℃ and 600mm/s figures verified performance?
No. They are listing claims. The supplied information does not independently verify either figure.

Alternative options

3D Printer Hot End Kit, Upgrade Ceramic Hotend Kit 0.4mm Hardened Steel Nozzle, Assembled Hotend Kit 3D Printer Replacement Parts for Kobra 3 Printer, for Kobra 3 Combo
$22.77

VGOL 3D Printer Extruder Hot End Kit Hotend/Printhead 0.4mm Brass Nozzle 100K Thermistor Heater Cartridge Heat Block Silicone Sleeve Compatible with Anycubic Compatible with Kobra 3
$23.09

YUYUEMI Kobra 3 Hotend Upgrade Set for Anycubic Kobra 3 Print Head Extruder Kit with 0.4mm Hardened Steel Nozzles 24v 60w High Speed 3D Printer
$24.85

Jiawu Upgrade Hotend Kit for Kobra 3, for Kobra 3 Combo, 3D Printer Hotend Kit, Ceramic Heating Block, Hardened Steel Nozzle Hot End Replacement, 600mm/s High Speed
$23.37

for Anycubic Kobra 3 Max Nozzle Kobra 3 Nozzle Steel Kobra 3 Max Nozzle Hardened Steel Nozzle 0.4mm, High Flow&High Speed Quick-Swap Print Head for Anycubic Kobra 3 Max/Kobra 3 Max Combo
$15.99

Kobra 3 Hardened Steel Nozzle,High Temperature High Hardness Wear Resistant Upgrade High Flow Nozzle for Anycubic Kobra 3 Nozzle Hot End Kit (0.4mm)
$9.99

Jiawu PEY PEI Build Plate, 256x268mm Rainbow PEY Starry Pattern Textured PEI Spring Steel Sheet Dual Sides, 3D Printer Heated Bed Spring Steel Flexible Platform, for Kobra 3/3 Combo
$25.02

Pyhodi Upgrade Hotend Kit, Ceramic Heater 0.4mm Hardened Steel Nozzle Aluminum Heatsink Hot End Kit for Kobra 3 Combo/ 3 V2 Combo
$29.43

Xlihdzum 10-Pack Brass Extruder Nozzles for Ender 3 V3 SE | High Speed Brass Nozzle 3D Printer Accessories Kit Brass Nozzles Set 8x0.4mm + 2x0.6mm for Extruder Nozzle Accessories
$20.99

OVAQUIXI Hotend Assembled Extruder Printhead Kit, Metal Design, Quick Install, Compatible for Anycubic Kobra 3 and Kobra 3 Combo
$29.01

Upgrade Ceramic Hotend Kit, Ceramic Heating Block Kit with 0.4mm Hardened Steel Nozzle, Ceramic Hotend Upgrade, All Metal Integrated Extruder Hot End Replacement for Kobra 3
$21.84

Creality Upgraded Sprite Extruder SE NEO Kit, Direct Drive Extruder, Upgrade Dual Gear Feeding Design for Ender-3 V2 Neo/Ender-3 Neo/Ender-3 Max Neo/Ender-2 Pro
$42.32