1 / 7Jectse NEMA 23 Stepper Motor Driver Kit, 23HS5628
The Jectse NEMA 23 Stepper Motor Driver Kit pairs a 23HS5628 motor with a TB6600 driver for CNC, engraving and 3D-printer motion projects. The listing describes closed-loop control and safety protections, but check the detailed specifications and package list against the selected listing before purchase.
At a glance
- Listing describes a closed-loop system intended to reduce lost steps and adjust current in response to load.
- Driver listing gives a 0.5-4.0A output-current range and 1–32 subdivision options, including the listed 2/A and 2/B settings.
- Motor is listed as a two-phase hybrid type with 1.8° step angle and 126N.cm holding torsion.
- Overheat, undervoltage and overcurrent protection are claimed for the driver.
Pros and cons
Pros
- Motor and driver are both specified, with current, step angle, shaft diameter and torque details to help assess project fit.
- The stated subdivision options and variable driver current give builders several listed setup choices.
Technical specifications
24 specifications| Brand | Jectse |
|---|---|
| Model | Jectse3yx4ug18ag |
| Driver model | TB6600 |
|---|---|
| Output current | 0.5-4.0A |
| Maximum power | 160W |
| Subdivision | 1, 2/A, 2/B, 4, 8, 16, 32 |
| Recommended power supply | Recommend using 5A Switching Power Supply |
| Motor model | 23HS5628 |
|---|---|
| Shaft diameter | 6.35mm |
| Current/phase | 2.8A |
| Holding torque | 12600g.cm |
| Step angle | 1.8° |
| Type | Hybrid |
| Step length | Approx. 56mm / 2.20in |
| Phase resistance | 0.9Ω |
| Phase inductance | 2.5mH |
| Holding torsion | 126N.cm |
| Rotor inertia | 300g.cm2 |
| Wires | 4 Wires |
| Operating temperature | -10 to 45℃ |
|---|---|
| Storage temperature | -40 to 70℃ |
| Humidity | No Condensation, No Water Droplets |
| Gas and dust conditions | No Flammable Gas and Conductive Dust |
| Materials | Alloy Steel, PCB, Aluminum Alloy, ABS |
|---|
What to know before buying
- The 5A switching power supply is recommended, but is not named in the package list. Confirm whether you have a suitable supply before planning installation.
- Environmental conditions are stated as no condensation or water droplets, and no flammable gas or conductive dust. These are listed operating limits, not an outdoor or wet-environment rating.
Listing details to confirm
The listing uses both “holding torque” at 12600g.cm and “holding torsion” at 126N.cm, and claims closed-loop operation while naming the driver TB6600 without clarifying how these details map to the supplied system. Confirm driver and control compatibility, torque specification and closed-loop implementation for your setup. The package list also conflicts with the separate “Included Components” value “no”.
What’s in the box
- MotorCheck selected pack
- DriverCheck selected pack
- Connecting cableCheck selected pack
- Driver controllerCheck selected pack
- KnobCheck selected pack
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- CNC, engraving or 3D-printer builders who need a NEMA 23 motor and driver combination and can verify controller and power-supply compatibility.
- Users whose design can make use of the listed 1.8° motor step angle and driver subdivision settings.
Less suited to
- Buyers who need a confirmed power supply included or a clearly documented closed-loop wiring and control arrangement.
- Installations exposed to condensation, water droplets, flammable gas or conductive dust.

Customer reviews on Amazon
- 5 stars
100% 100% - 4 stars
0% 0% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
0% 0%
The supplied evidence contains only a single aggregate rating and no written customer feedback. That small sample cannot establish how reliably the motor, driver or claimed closed-loop features perform in practical CNC or printer setups.
Frequently asked questions
What motor and driver models are listed?
The listing specifies a 23HS5628 motor and a TB6600 driver.
What power supply does the listing recommend?
It recommends using a 5A switching power supply. The package list does not name a power supply, so plan to confirm this before ordering.
Does the listing clearly confirm closed-loop operation?
It claims a closed-loop system intended to reduce lost steps, but does not explain the implementation alongside the TB6600 driver model. Check the selected listing and confirm compatibility with your controller.
What are the stated environmental limits?
The listing gives an operating temperature of -10 to 45℃ and storage temperature of -40 to 70℃. It also specifies no condensation, water droplets, flammable gas or conductive dust.

Alternative options

Generic Nema 23 Closed Loop Stepper Motor KIT, CNC KIT with 126N.cm 2.8A 56mm Nema 23 Motor with Cables & DM556 2 Phase Closed Loop Stepper Driver for 3D Printer, Engraving Machine
$46.99

Mini Linear Rail Guide Slide Actuator, 200mm Stroke T6x1 Screw NEMA11 Stepper Motor for DIY CNC Router Parts, Table Ball Screw Motion CNC Linear Guide Stage Actuator Stepper Motor
$74.41

Jectse Integrated Servo Stepper Motor 1.5Nm 3000RPM Closed Loop Encoder CNC Engraving Machine 3D Printer with Built in 1000 Line Encoder, Ideal for Industrial Robots
$77.04

Luocute Nema23 Stepper Motor, D M 556 Driver Kit 2.8A 126N.cm 56mm 2 Phase Hybrid Stepper Motor with Anti Resonance Design for Engraving Machine 3D Printer CNC Controller
$70.13

Generic Closed Loop Stepper Motor Kit, Nema 23 23HS5628 8mm Shaft Dia 126N.cm 2.8A 56mm with DM542 Microstep Driver, Closed Loop Stepper Driver for CNC Engraving Machine 3D Printer
$48.92

Stepper Motor Driver, TMC2209 V2.0 5 Sets Driver Module Ultra Quiet Stepper Motor Driver Module 2.5A Uart Nema17 Step Motor Driver Board Powerful 3D Printer Parts for TMC2208
$38.25

jojofuny 2 Pack NEMA 17 Stepper Motor Mount Bracket, Precision CNC Aluminum Motor Holder with Screws, Anti-Vibration Fixed Bracket for 3D Printer, CNC Router, Cutter, Makers and DIY Builders
$13.89

AgWenKui 2pcs 3D Printer Stepper Motor Drive Board for A4988/DRV8825 | 42 Stepper Motor Expansion Board & Control Shield Module, Compatible with A4988/DRV8825 Driver Modules
$9.99

FoxAlien Masuter Pro CNC Router Machine 3-Axis Desktop | Beginner Hobby Engraving Machine All-Metal Structure for Wood Acrylic MDF Nylon Routing Milling Carving
$699.99