1 / 7Product guide
Xiuganpo DS51150 Digital Servo, Aluminium
Xiuganpo DS51150 is a digital servo described for automation systems, with a listed aluminium material and a claimed load capacity of up to 150KG. The listing does not provide key integration details such as dimensions, operating voltage or interface specifications, so confirm suitability for your setup before buying.
At a glance
- Digital servo presented for automation systems.
- Manufacturer claims a load capacity up to 150KG, but gives no measurement conditions in the supplied details.
- The listing describes rapid response, precise control, compactness and support for various interfaces without supplying specific performance or compatibility figures.
Pros and cons
Pros
- Aluminium is the listed material.
- A stated load-capacity claim may be relevant for buyers assessing heavy-load applications, provided it is verified against their use case.
Technical specifications
2 specifications| Brand | Xiuganpo |
|---|
| Material listed | Aluminium |
|---|
What to know before buying
- The listing claims a load capacity of up to 150KG but does not specify test conditions or what the load figure represents. Response speed, precision, dimensions, operating voltage and supported interface types are also unspecified, so verify these against your system requirements.
What’s in the box
Included- no
Who is it for?
A good fit for
- Buyers seeking a digital servo for an automation project who can confirm its load, electrical and interface requirements before purchase.
- Builders for whom the listed aluminium material is relevant.
Less suited to
- Buyers who need verified torque, speed, voltage, dimensions or interface compatibility from the listing alone.
- Applications where an unqualified 150KG load claim cannot be checked against documented operating conditions.

Frequently asked questions
What material is listed for the Xiuganpo DS51150?
The listing gives Aluminium as the material.
What load capacity does the listing claim?
It claims the servo handles loads up to 150KG, but provides no test conditions or explanation of the load measure. Confirm the claim for your application.
Does the listing specify supported interfaces?
It claims support for various interfaces but does not identify them. Check compatibility with your controller before buying.

Alternative options

AKLOSIPYDs3225mg 25kg Waterproof Digital Servo For 1/8 1/10 1/12 Rc Car | Metal and plastic housing with copper gears and double ball bearings for stable PWM drive control in RC models
$36.79

Akozon 4412 1:10 Scale Remote Control Digital Servo with 12kg Large Torque Metal Gears for RV
$29.37

WOAEIUOS 20kg Low Profile Servo RC Digital Servo High Torque Full Metal Gear & Steering Servo Arm for 1/10 RC Car Tamiya Kyosho On-Road Touring Drift Car/Robot/Boat
$31.99

25KG Digital Servo 360 Continuous Rotation Metal RC Robot
$34.10

POENVFPO RC Waterproof Servo, Aluminum Alloy Cover 25KG Waterproof Digital Servo 270 Degree High Torsion for 1/10 1/12 RC Car Robot BoatBody Parts
$48.06

GOUP RC 20kg Low Profile Digital Servo of Metal Gear with 25T Metal Arm for 1/8 1/10 1/12 RC Car Model DIY Robot
$45.28

AgWenKui 2pcs 3D Printer Stepper Motor Drive Board for A4988/DRV8825 | 42 Stepper Motor Expansion Board & Control Shield Module, Compatible with A4988/DRV8825 Driver Modules
$9.99

12g/1.8 kg/10 Seconds Analog Servo Metal Gear, Metal Gear Servo, Robots Super Smooth for EMAX ES08MA II Fixed Wings
$17.78

Nema 17 Stepper Motor 34mm 1.5A 2 Phase 1.8 Degree with 90cm Cable, for 3D Printer, CNC Machine, 12V-24V
$19.99

AOWINHIT RC Accessories Metal Servo for WPL B16/B24/C34, High Performance, Lightweight, Silent Operation, 4.6Kg/cm Torque, Silver
$19.59

FullFun 388pcs Brass Threaded Inserts Heat Set Insert M2 M2.5 M3 M4 M5 M6 1/4-20 M8 Metric Female Knurled Embedment Nuts for Plastic and 3D Printing Injection Molding Assortment Kit
$23.99
$48.22$63.42
Save 24%