Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

MILAPEAK 3:1 Adhesive Heat Shrink Tubing, 39 mm x 4 ft

MILAPEAK 3:1 adhesive heat shrink tubing is a 4-foot black polyolefin sleeve intended for cable and wire protection. Its large listed diameter suits bundling or covering larger connections, while the adhesive lining is intended to seal as the tube shrinks with heat.

At a glance

  • Dual-wall tubing with an adhesive lining that the listing says softens with heat to seal around a connection.
  • The stated 3:1 shrink ratio makes it suited to larger starting diameters that need a closer fit after shrinking.
  • The listing describes use for cable harnesses and solder-joint protection.
Price
$13.00Save 21%

Reference price: $16.44

Price checked: 18 Nov 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • Four feet of large-diameter tubing can cover longer sections or larger cable bundles than short repair sleeves.
  • Adhesive lining is intended to improve sealing against liquids, including salt water, when correctly heated.

Technical specifications

17 specifications
Identity
BrandMILAPEAK
Dimensions and installation
Dimensions listed121.9L x 3.8W centimetres
Weight listed0.15 Kilograms
Nominal wall thickness0.01 inches
Outside diameter1.5 Inches
Length4 Feet
Shrink ratio3:1
Minimum shrinkage temperature70°C
Full shrinkage temperature110°C maximum
Materials and protection
MaterialPolyolefin
ColourBlack
Operating temperature-55°C to + 125°C
Tensile strength10.4Mpa
Dielectric strength15 kV / mm
FlammabilityFlame Retardant
Voltage and temperature claimUL certified for up to 600V, 257 degrees Fahrenheit
Compliance claimRoHS Compliant

What to know before buying

Listing details to confirm

The listed dimensions are 121.9L x 3.8W centimetres, while the title and feature copy describe a 1.5-inch (39 mm) diameter when round. These measurements are presented differently, so confirm the flat and round sizing before purchase. The listing also gives both a 257°F maximum claim and a 110°C maximum full-shrink temperature. Treat the stated UL and RoHS compliance as listing claims, not independently verified certifications. Use a heat source carefully and allow the tubing to cool before touching, as the instructions specify.

Who is it for?

A good fit for

  • DIY cable repairs and wire-bundle covering where a large sleeve and adhesive lining are useful.
  • Buyers needing a 4-foot length of black 3:1 shrink tubing for cable harnesses or solder joints.

Less suited to

  • Small individual wires or connections where a large-diameter sleeve would be impractical.
  • Applications requiring independently confirmed electrical ratings or certification documentation.
MILAPEAK 3:1 Adhesive Heat Shrink Tubing, 39 mm x 4 ft · photo 2
Additional product photo 2

Customer reviews on Amazon

4.7 / 5 · 7,064 ratings
  • 5 stars80%80%
  • 4 stars14%14%
  • 3 stars4%4%
  • 2 stars1%1%
  • 1 star1%1%

Customer feedback reports good perceived quality, shrinkage and sealing, and appreciates the adhesive. The supplied summary also notes use for protecting hands from fibreglass. Those impressions may matter for cable-covering and sealing tasks, but do not establish the claimed dimensions, temperature limits or electrical ratings. The overall rating distribution is mostly five-star, with a smaller spread across lower star categories, so feedback is favourable overall but not uniform.

Positive themes

  • Customers report that the tubing shrinks well and provides a good seal.
  • Customers praise perceived quality, functionality and the amount of adhesive.

Frequently asked questions

What size is this tubing?

The title and feature text state 1.5 inches (39 mm) in diameter when round, while the dimensions field gives 121.9L x 3.8W centimetres. Check which measurement is relevant to your fit before buying.

How much does it shrink?

The listing specifies a 3:1 shrink ratio. It also lists a minimum shrinkage temperature of 70°C and full shrinkage temperature of 110°C maximum.

Does it include adhesive?

Yes. The listing describes dual-wall tubing with a heat-activated adhesive lining. It says the adhesive softens at 212°F to seal the connection.

What is included?

The listing says the package contains one 4-foot length of 1.5-inch (39 mm) dual-wall 3:1 adhesive-lined tubing.

MILAPEAK 3:1 Adhesive Heat Shrink Tubing, 39 mm x 4 ft · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.6
meite 7 mm V-Nails, 4,000 Pieces
meite 7 mm V-Nails, 4,000 Pieces

A$52.99

A$40.84

-23%
-23%
Product details in Markdown