Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

Lokkr 405 nm UV Resin Curing Light, 6 W

Lokkr 405 nm UV Resin Curing Light is a mains-powered lamp for curing 405 nm photosensitive resin prints. The listing claims six LEDs, an adjustable bracket and a 10–15 second cure at 5 cm, while noting that thicker parts need longer exposure.

At a glance

  • The listed wavelength is 405 nm, intended for compatible photosensitive resin prints.
  • The seller claims a 10–15 second cure from 5 cm, with longer exposure needed for thicker parts.
  • An adjustable rear bracket is described, with several possible mounting methods.
  • The listing also claims use for tasks such as ink and adhesive curing, nail curing and fluorescence detection.
Price
$33.14Save 15%

Reference price: $38.99

Price checked: 18 Nov 2026

View offer

Often bought together

Pros and cons

Pros

  • The stated wavelength and short-distance curing guidance make the intended use clear for compatible resin prints.
  • The bracket angle can be adjusted to direct the light toward a workpiece.

Cons

  • The listing says the light cannot cure liquid resin directly or filament prints.

Technical specifications

13 specifications
Identity and output
BrandLokkr
Power6W
Wavelength405nm
LED count6 high-power 405nm UV LEDs
Electrical
Input voltage90-230V
Frequency50- 60Hz
Batteries requiredNo
Dimensions and installation
Light body size115 * 85 * 75MM
Weight listed470 g
Package dimensions15.5 x 10.9 x 10.2 cm; 470 Grams
BracketAdjustable bracket angle
Use and curing
Listed curing time and distance10-15 seconds from a distance of 5 cm from the light
Lamp typeUV foot lamp with high brightness

What to know before buying

Listing details to confirm

Use eye protection because the listing warns of strong ultraviolet emission. Cure times depend on distance and part thickness, and the stated 10–15 seconds applies at 5 cm. The title and details describe the output as 6 W, while another listing claim compares each 1 W LED with a conventional 10 W lamp and describes power consumption as one tenth. Those figures are not directly reconciled, so confirm the electrical and output rating if it matters. Wall, pedestal and ceiling mounting are mentioned as possibilities, but included mounting hardware is not confirmed.

Who is it for?

A good fit for

  • Resin 3D-print users seeking a 405 nm lamp for curing already-printed compatible parts.
  • DIY users who can position the light close to the work and allow extra time for thicker pieces.

Less suited to

  • Users needing a lamp to cure liquid resin directly or filament prints.
  • Buyers who need a confirmed mount or a precisely established output rating without clarifying the listing discrepancy.
Lokkr 405 nm UV Resin Curing Light, 6 W · photo 2
Additional product photo 2

Customer reviews on Amazon

5 / 5 · 14 ratings
  • 5 stars100%100%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars0%0%
  • 1 star0%0%

The supplied evidence contains aggregate ratings but no written customer feedback. The recorded ratings are uniformly five-star across a small sample, which is a positive but limited signal and does not establish curing performance, ease of positioning or whether the listed output figures are accurate.

Frequently asked questions

What is this lamp intended to cure?

The listing describes it for 405 nm photosensitive resin prints. It specifically says it cannot cure liquid resin directly or filament prints.

How long does curing take?

The seller claims 10–15 seconds at a distance of 5 cm. Thicker parts need longer, so treat that time as guidance rather than a guaranteed result.

Can it be mounted?

The listing describes an adjustable rear bracket and mentions wall, pedestal and ceiling mounting options. It does not confirm which mounting hardware is included.

What safety precaution does the listing specify?

It advises using eye protection because the light emits strong ultraviolet light.

Lokkr 405 nm UV Resin Curing Light, 6 W · photo 3
Additional product photo 3

Alternative options

Product details in Markdown