1 / 7Filfeel DN32 Brass Swing Check Valve, 1-1/4-inch Thread
Filfeel DN32 Brass Swing Check Valve is listed for water systems, with threaded connections intended to allow water flow in one direction and limit backflow. Confirm the thread standard and installation fit for your plumbing before buying.
At a glance
- Swing-type check valve listed for one-way water flow and backflow prevention.
- Brass construction with threaded DN32 connections.
- The listing gives a 232 PSI pressure figure, but its wording and the separate pressure field do not establish how the rating applies.
Pros and cons
Pros
- Brass body and threaded connections suit buyers seeking a metal valve for a compatible water system.
- Both inlet and outlet are listed as 1.25 Inches, with the thread also specified as 1-1/4".
Technical specifications
16 specifications| Brand | Filfeel |
|---|---|
| Model | FILFEEL416e3apl8x |
| Valve type | Check Valve |
|---|---|
| Structure | Swing type |
| Connection | Thread |
| Thread size | 1-1/4" |
| Inlet connection size | 1.25 Inches |
| Nominal diameter | DN32 |
| Suitable fluid | Water |
| Flow direction | One way |
| Maximum operating pressure | 232 Pound per Square Inch |
|---|---|
| Operating temperature | Normal temperature |
| Material | Brass |
|---|---|
| Dimensions listed | 10 x 8 x 6 centimetres |
| Alternative size listing | Approx. 8.3 x 7cm / 3.3 x 2.8inch |
| Weight | Approx. 445g / 15.7oz |
What to know before buying
Listing details to confirm
The listing is inconsistent about dimensions, giving 10 x 8 x 6 centimetres as well as Approx. 8.3 x 7cm / 3.3 x 2.8inch. It also alternates between nominal pressure and maximum operating pressure for 232 PSI, and does not confirm the thread standard. Verify valve clearance, mating thread compatibility and pressure suitability for your installation.
What’s in the box
- No contents specifiedCheck selected pack
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- Water-system installations needing a DN32, 1-1/4-inch threaded swing check valve, provided the thread standard and pressure rating match the system.
Less suited to
- Installations where the thread standard, dimensions or pressure requirements must be confirmed from a detailed engineering specification.
Frequently asked questions
What connection size is listed?
The listing gives DN32 and 1.25 Inches for both inlet and outlet, and specifies a 1-1/4" thread. The thread standard is not confirmed, so check it against your fittings.
What pressure can it handle?
The listing states 232 Pound per Square Inch, but describes this both as nominal pressure and maximum operating pressure. Confirm the applicable rating for your system before installation.
Are the listed dimensions consistent?
No. One details field gives 10 x 8 x 6 centimetres, while the description gives Approx. 8.3 x 7cm / 3.3 x 2.8inch. Check the available installation space and listing before buying.
Alternative options
Zonon 2 Pcs 3/4 Inch Check Valve, One Way Spring Brass Check Valve | Non Return in Line, Backflow Prevention, NPT Male in FNPT out Thread for Garden Hose Well Pump Irrigation Chemical Industry
$50.09
Boltigen 2Pcs 1in NPT Spring Check Valve, Brass Non Return One Way Check Valve, Vertical Inline Water Backflow Preventer for Well, Pump, Tank (1" Female * 1'' Male)
$52.36
Litoexpe 1/2" One Way Inline Check Valve, Non Return Ozone Resistance PVDF Plastic One-Way Fuel Oil Water Gas Pump Air Check Valve, Pack of 2
$16.89
ChillWaves 304 Stainless Steel In-Line Split Check Valve 3/8" NPT Male x 3/8" NPT Female Thread, One-Way Non-return Check Valve，Prevent Water Back-flow(1-PACK)
$45.46
Camco RV Water Heater Backflow Preventer | Features a Heavy-Duty Brass with a Stainless Spring Construction and a 1/2-Inch Male x Female NPT (23303)
$29.04
ECSiNG 2Pcs BSP Male to Female Thread Check 1/4 Inch External Thread Brass Pneumatic Isolation Valve for Air Water Oil and Gas 40mm
$18.39
Products with discounts that might interest you
Offer details
- Amazon Prime savings offer