Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

eSUN eBOX Lite 3D Filament Dryer Box

The eSUN eBOX Lite is a heated dryer and storage box for 3D printer filament, with a transparent lid and adjustable heating time. Its listed temperature capability and spool fit are manufacturer claims, so check that they suit your filament and spool before buying.

At a glance

  • Heats and stores filament in the same enclosure, with a claimed heating range of 40℃ -55℃.
  • The listing claims the interior can reach 50℃-55℃ in just 2 hours.
  • Fits filament listed at 1.75mm, 2.85mm or 3.00mm and 0.5kg, 0.75kg or 1kg.
  • A transparent lid lets users check the filament without opening the box.
Price
$65.02Save 15%

Reference price: $76.49

Price checked: 18 Nov 2026

View offer

Often bought together

Pros and cons

Pros

  • The timer can be set from 0-18h, giving buyers a stated limit for unattended drying sessions.
  • The listing describes a built-in fan and insulation, intended to circulate heat and help maintain the interior environment.

Technical specifications

10 specifications
Identity
BrandeSUN
Drying and controls
Temperature range40℃ -55℃
Heating temperature reached50℃-55℃ in just 2 hours
Heating timer setting0-18h
Temperature setting levels1-3
Filament fit
Supported filament diameters1.75mm/2.85mm/3.00mm
Supported filament weights0.5kg/0.75kg/1kg
Maximum capacity200*73mm
Dimensions and installation
Weight listed1 Kilograms
Materials and protection
Material listedCotton

What to know before buying

Listing details to confirm

The listing gives both a 40℃ -55℃ operating range and a claim of reaching 50℃-55℃ in two hours, without clarifying the relationship between these figures. It also describes constant temperature and humidity without specifying a humidity range or measurement method. The capacity dimensions are given as 200*73mm without units, and the material is listed as cotton despite feature text describing insulation cotton. Treat these as listing details to confirm rather than established product defects.

Who is it for?

A good fit for

  • 3D printer owners who want to dry and feed filament from a covered box.
  • Buyers whose spools fall within the listed diameters, weights and maximum capacity.

Less suited to

  • Buyers who need a documented humidity target, verified drying performance or a specified temperature schedule for a particular filament.
eSUN eBOX Lite 3D Filament Dryer Box · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 69 ratings
  • 5 stars71%71%
  • 4 stars16%16%
  • 3 stars4%4%
  • 2 stars5%5%
  • 1 star4%4%

Customer feedback describes the dryer as working well and offering good value, while reports about noise are mixed. That may matter if it will run nearby or overnight. The listing claims a low-noise fan, but customer perceptions vary and do not establish a measured noise level.

Positive themes

  • Customers report that the dryer works well.
  • Customers describe it as good value for money.

Mixed feedback

  • Noise feedback is mixed, with some customers finding it relatively quiet and others saying it is a little noisy.

Frequently asked questions

Which filament diameters does the eBOX Lite support?

The listing names 1.75mm, 2.85mm and 3.00mm filament. Check spool dimensions as well, since the stated maximum capacity is 200*73mm and the listing does not specify units.

What temperature can it reach?

The listing specifies a 40℃ -55℃ temperature range and separately claims the box can reach 50℃-55℃ in two hours. It does not explain how those statements relate.

Can the box store filament while printing?

The product is described as a dry storage and filament-feeding box for use during printing. Confirm your spool fits its listed capacity before purchasing.

eSUN eBOX Lite 3D Filament Dryer Box · photo 3
Additional product photo 3

Alternative options

Product details in Markdown