1 / 7Eosnow 12V 3-Speed Turntable Motor, 25mm Mount
Eosnow’s turntable motor is listed for 12V DC operation, with three speed settings and a 25mm mounting hole. It may suit a DIY turntable repair or rotating craft project, but the supplied details conflict about its speed range and voltage limits, so confirm compatibility before ordering.
At a glance
- Three listed speeds are intended to cover 33, 45 and 78 RPM record formats.
- The 25mm mounting hole may fit compatible turntable chassis or DIY mounting layouts.
- Clockwise rotation is specified, which matters when matching the motor to the platter drive.
Pros and cons
Pros
- Three speed settings provide a stated option for different record formats.
- The listing gives a mounting-hole size and rotation direction that can help assess fit and drive compatibility.
Technical specifications
10 specifications| Brand | Eosnow |
|---|
| Rated voltage | DC 12V |
|---|---|
| Operating voltage | 8.4-16.0V DC |
| Rated load | 8g.cm |
| Rotation direction | CW |
| Listed revolving speed | 78RPM |
| Speed settings | 33, 45, and 78 RPM |
| Bottom diameter | Approx. 32mm/1.3in |
|---|---|
| Mounting hole | Approx. 25mm/1in |
| Working temperature | -5℃ to + 60℃ conventional humidity |
What to know before buying
Listing details to confirm
The listing details are inconsistent: the title and specifications give a 12V rating, while other text says DC 9-12V and 8.4-16.0V DC operating voltage. It describes three speeds as 33, 45 and 78 RPM, yet separately calls 78RPM the revolving speed and describes 33 and 45 RPM as options. Confirm the required supply range and actual speed-selection behaviour before buying.
What’s in the box
- 1 motorCheck selected pack
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- DIY turntable repairs where clockwise rotation, a 25mm mounting hole and the stated speed settings match the existing setup.
- Rotating craft or display projects that can use a compatible mount and motor arrangement.
Less suited to
- Turntable replacements where the voltage range, shaft or mounting dimensions, or rotation direction have not been checked against the original motor.

Frequently asked questions
What speeds does this motor support?
The listing names 33, 45 and 78 RPM, but also separately describes 78RPM as its revolving speed. Confirm the selectable speeds with the listing before buying.
What voltage supply does it need?
The details list a DC 12V rating and an operating range of 8.4-16.0V DC, while other text says DC 9-12V. Check the supply requirements with the selected listing.
Will it fit my turntable?
The listed mounting hole is approximately 25mm/1in. Confirm the mount, drive arrangement and clockwise rotation suit your specific turntable.

Alternative options

High Torque DC Motor 12 V/24 V Permanent Magnet Motor Mini DC Motor DIY Generator Motor 30W CW/CCW with Moun
$40.00

HUSETOO 775 High Torque DC Motor, 12V/24V, 10K/20K RPM, Round Shaft, 1-Pack | For compatible chucks, couplers and polishing tools; 1 round-shaft motor with dual ball bearings, cooling fan and bracket.
$27.00

CHANCS Fixed Bracket Motor Holder TYC-50 50KTYZ Motor Universal Mounting High Hardness
$28.06

Greartisan DC 12V 100RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 37mm Diameter Gearbox
$30.50

Bringsmart JGY-370 DC Worm Gear Motor 3rpm 12 Volt High Torque Mini Turbine Worm Reducer Motor Self-Locking Micro Gear Motor (JGY-370 12V 3rpm)
$39.44

CHANCS Small Motor DC Gear Motor 6V 4RPM Low Speed Handicraft DIY Ferris Wheel Electric Advertising Light Box Motor
$18.59

Badafaci 25mm DC 12V Metal Gear Motor, Low Speed High Torque Brush Motor with Pure Copper Coil for Electronic Lock Robot Electric Curtain (12V 60RPM)
$15.50

10pcs Mini Generator Motors 3V-12V DC Motor Electric Motor for DIY Electronic Wind Turbine Fan Hand Cranked Power Model School Project Educational Physics Model Cars Airplanes Scientific Experiments
$22.99

12V 400RPM Low Speed Metal Gear Motor for Electronic Locks | Pure copper wire coil, wear-resistant metal gear, smooth and quiet operation for robots
$15.05

HUSETOO 775 High Torque DC Motor, 12V/24V, 10K/20K RPM, Round Shaft, 2-Pack | For chucks, couplers and polishing tools; 2 round-shaft motors with dual ball bearings, cooling fans and brackets.
$31.34

Mcbazel 360 Degree Motorized Rotating Display Stand, 5.7 Inches Electric Rotating Turntable with Low Noise for Jewelry/Photography Products/Watch/Cup and ect. - Black
$17.27

25mm DC Gear Motor 12V 60RPM Metal Gear High Torque | Pure copper coil, low noise slow drive, 4mm shaft 10mm length, for electronic locks robots curtains
$15.25