1 / 7ELEGOO EL-SM-012 ESP-WROOM-32 USB-C Development Boards, 3-Pack
Pack: ELEGOO EL-SM-012 ESP-WROOM-32 development boards come as a three-board set with USB-C connectors and CP2102 USB-to-serial interfaces. Their listed dual-core processor, 2.4 GHz Wi-Fi, Bluetooth and peripheral connections suit embedded and IoT prototyping, though several generic specification fields conflict with the ESP32-specific description.
At a glance
- Three ESP-WROOM-32 development boards with USB-C and onboard CP2102 USB-to-UART interfaces.
- The description identifies 2.4 GHz 802.11 b/g/n Wi-Fi and Bluetooth 4.2, with station, access-point and combined AP+STA modes.
- GPIO, UART, SPI, I2C, PWM, ADC, DAC and capacitive-touch peripherals support connections to a range of project components.
- Arduino IDE, MicroPython and NodeMCU are named as supported environments or platforms.
Often bought together
Pros and cons
Pros
- A three-board pack supports multiple prototypes or spares without buying boards individually.
- USB-C and CP2102 provide a route for programming and serial debugging, subject to using a data-capable cable and suitable driver.
- The described dual-core ESP32 platform combines Wi-Fi and Bluetooth with a broad set of peripheral interfaces.
Cons
- The package is described as boards only, so cables, breadboards, sensors and power supplies must be sourced separately.
- GPIO uses 3.3 V logic, so directly applying 5 V to GPIO is not suitable.
Technical specifications
20 specifications| Brand | ELEGOO |
|---|---|
| Model | EL-SM-012 |
| Wireless connection listed | LAN, USB |
|---|---|
| Wireless standards described | 802.11bgn, Bluetooth |
| Wi-Fi band | 2.4GHz |
| Bluetooth version | Bluetooth 4.2 |
| Bluetooth connection distance | 10 m |
| USB connector | USB-C |
| USB-to-serial interface | CP2102 |
| Listed USB ports | 1 |
| RAM listed | 0.5 MB |
|---|---|
| Storage listed | 4 MB |
| Processor listed | Core i5 |
| Processor speed | 240 MHz |
| Processor brand | Espressif Systems |
| Processor count | 2 |
| ESP32 memory described | 520 KB on-chip SRAM and 4 MB SPI flash |
| Weight listed | 0.05 Kilograms |
|---|
| Number of boards | 3 |
|---|---|
| Warranty description | Six months |
What to know before buying
- Use a data-capable USB-C cable for programming. A CP210x driver may be needed if the computer does not create a serial port automatically.
- GPIO pin functions vary. Check the board pinout, avoid applying 5 V directly to GPIO, and note that ADC2 readings may be unavailable while Wi-Fi is active.
- Disconnect power before rewiring. Use separate, adequately rated supplies and suitable drivers for motors, relays, heaters and other high-current loads.
Listing details to confirm
Listing details are inconsistent: the generic fields call the processor Core i5 and list 0.5 MB RAM, while the ESP32 description specifies an Xtensa LX6 processor and 520 KB on-chip SRAM. The listing gives 4 MB storage and also describes 4 MB SPI flash, but cautions that production flash capacity should be confirmed. It also lists LAN and USB as wireless connection types despite describing Wi-Fi and Bluetooth, and the single USB-port count is not clearly reconciled with the board description. Confirm the exact configuration and pinout for the selected listing before purchase.
Who is it for?
A good fit for
- Makers building connected sensor, control, data-logging or smart-home prototypes who can supply their own wiring and peripherals.
- Classroom or development use where three ESP32 boards are useful for parallel projects or spares.
- Buyers comfortable checking ESP32 pin assignments, USB-to-serial setup and power requirements.
Less suited to
- Anyone seeking a ready-to-use kit with cables, breadboards, sensors or power supplies included.
- Projects that require 5 V-tolerant GPIO or dependable ADC2 readings while Wi-Fi is active.
- Buyers who need a clearly reconciled processor and memory specification without confirming the selected listing.

Customer reviews on Amazon
- 5 stars
83% 83% - 4 stars
9% 9% - 3 stars
4% 4% - 2 stars
1% 1% - 1 star
3% 3%
Customer feedback reports positive impressions of quality, out-of-box operation, programming ease and built-in Wi-Fi, while USB-C connectivity receives mixed feedback. That is useful context for a development board whose described programming path depends on USB-C and CP2102, but it does not establish that every computer, cable or board behaves the same way. The overall rating distribution is mostly five-star, with a smaller spread of lower ratings, and does not explain the reasons for those ratings.
Positive themes
- Customer feedback highlights ease of programming, perceived quality and built-in Wi-Fi.
Mixed feedback
- USB-C connectivity receives mixed feedback.
Frequently asked questions
What comes in this package?
The product description specifies three USB-C ESP32 development boards only. It says USB cables, breadboards, jumper wires, sensors, batteries, power supplies and tutorials are not included.
Can these boards be programmed over USB-C?
The description says each board has a CP2102 USB-to-serial interface for programming and serial debugging. It recommends a data-capable USB-C cable, and a CP210x driver may be needed if no serial port appears.
Which wireless features are described?
The ESP32 description specifies 2.4 GHz 802.11 b/g/n Wi-Fi and Bluetooth 4.2, including BR/EDR and Bluetooth Low Energy. It lists station, access-point and combined AP+STA Wi-Fi modes.
Are the technical specifications fully consistent?
No. The listing's generic fields say Core i5 and 0.5 MB RAM, while its ESP32-specific description identifies an Xtensa LX6 and 520 KB on-chip SRAM. Check the listing details and production flash capacity before relying on a particular configuration.

Alternative options

ELEGOO 3PCS ESP-WROOM-32 Development Board Micro-USB, CP2102 Serial Chip | 2.4GHz Dual Mode WiFi+Bluetooth Dual Core Microcontroller for Arduino IDE, Support MicroPython, NodeMCU, AP/STA/AP+STA
$26.39

2Set ESP32 Development Board 30Pin Type-C CP2102 WiFi+Bluetooth Dual Core NodeMCU-32S Lua with ESP-WROOM-32 Expansion Board ESP-32S Breakout Terminal Adapter Board
$20.21

ELEGOO 3pcs ESP-32 Type C Development Board & 120pcs Dupont Wire
$3,908.00

Lonely Binary 3-Pack ESP32 WiFi BT + 3 Expansion Bases for Arduino IDE | WS2812 RGB LED on GPIO2; 3 bases: 2.54mm GPIO, screw & non-screw terminal; USB-C, pre-soldered, no solder; cable + case
$39.99

ELEGOO ESP-32 Super Starter Kit with Tutorial Compatible with Arduino IDE | Development Board, USB-C Dual Core Microcontroller Support AP/STA/AP+STA, CP2102 Chip, WiFi, Bluetooth, 200+ parts for IoT
$71.99

Lonely Binary TinkerBlock ESP32-S3 Starter Kit, 12 Sensors, for Arduino IDE | Dual USB-C Ports, WiFi and Bluetooth LE, works with Arduino IDE, MicroPython, ESP-IDF, IoT and Smart Home Projects
$44.99

DIANN ESP32 ESP-WROOM-32 ESP-32S Development Board CP2102 Ultra-Low Power Dual Core ESP32-DevKitC-32 with Expansion Board
$16.99

Fanttik E2 Ultra Electric Screwdriver, Screwdriver for Electronics (Grey) | 50 Magnetic Bits, Max.0.6N.m, RevoStor Magnetic Storage, 5/32''Hex Screwdriver for PC, 3D Printer, RC Cars, Drone
$140.00

ELEGOO 37-in-1 Sensor Modules Kit with Tutorial Compatible with Arduino | Upgraded Parts, Suitable for UNO R3 MEGA Nano, 100% Compatible with Arduino IDE and STM32, Most Commonly Used Modules
$38.24

Lonely Binary 3-Pack ESP32 Mini 8MB Double the Flash WiFi Bluetooth Dual Core Development Board Compatible with Arduino (8MB of Flash)
$34.99

REOLINK 2K 5MP 180° Security Video Doorbell Camera Outdoor PoE with Chime | No Fee for Local Storage, 4:3 View, Smart Detection & Alerts, Home Assistant Compatible, Plug & Play, Video Doorbell PoE
$129.19

