1 / 7Dpofirs Neptune 4 Plus/4 Max Hotend Kit, 0.4 mm Nozzle
Dpofirs’ Neptune 4 Plus/4 Max hotend kit is a fully assembled replacement listing with a brass 0.4 mm nozzle and a claimed operating capability up to 300℃. Its fitment is limited to the Plus and Max models, not the Neptune 4 or 4 Pro.
At a glance
- Listed as fully assembled, which may reduce assembly work for a compatible replacement.
- The listing claims the hotend can handle various filaments up to 300℃.
- The stated fitment is specific to Neptune 4 Plus and Neptune 4 Max models.
Pros and cons
Pros
- A 0.4 mm brass nozzle and 24V 80W heating specification are provided, making key replacement-part details easier to compare.
- The kit is described as fully assembled for direct use.
Cons
- The stated compatibility excludes Neptune 4 and Neptune 4 Pro, so it is unsuitable for those models.
Technical specifications
11 specifications| Brand | Dpofirs |
|---|---|
| Product type | Hotend Kit |
| Compatible printers | Neptune 4 Plus/4 MAXimum |
|---|---|
| Filament temperature claim | up to 300℃ |
| Filament diameter | Approx. 1.75mm / 0.07in |
| Power | 24V 80W |
|---|---|
| Nozzle diameter | Approx. 0.4mm / 0.02in |
| Nozzle material | Brass nozzle |
| Listed materials | Aluminum alloy, stainless steel, brass, silicone |
|---|
| Weight listed | 53 g |
|---|---|
| Package dimensions | 9 x 6 x 3 cm; 53 Grams |
What to know before buying
- The listing identifies Neptune 4 Plus and Neptune 4 MAXimum/Max as compatible and explicitly says Neptune 4 and Neptune 4 Pro are not suitable. Confirm your exact printer model before ordering. The claimed temperature capability is listing information, not an independent performance result.
- Before use, check component tightness and readjust the hot bed after installation, as the listing instructs.
Who is it for?
A good fit for
- Owners of an Elegoo Neptune 4 Plus or Neptune 4 Max seeking a listed fully assembled hotend replacement.
- Buyers matching their existing setup to the stated 0.4 mm brass nozzle and 1.75 mm filament diameter.
Less suited to
- Owners of a Neptune 4 or Neptune 4 Pro, which the listing explicitly excludes.
- Buyers who need independently confirmed temperature or material compatibility.

Frequently asked questions
Which printers does this hotend kit fit?
The listing states Neptune 4 Plus and Neptune 4 Max, and says it is not suitable for Neptune 4 or Neptune 4 Pro. Check the exact model before purchase.
What nozzle and filament sizes are listed?
It lists an approximately 0.4 mm brass nozzle and filament diameter of approximately 1.75 mm.
What temperature can it handle?
The listing claims support for various filaments up to 300℃. This is a product claim rather than an independently verified result.
Does it arrive assembled?
The title describes it as fully assembled and the product details say direct use. The listing also advises checking component tightness and readjusting the hot bed after installation.

Alternative options

All Metal Hot End Extruder Kit with Brass Nozzle for Neptune 4 Plus 3D Printer Upgrade
$25.31

Olzzdda Upgraded Neptune 4 All Metal Hotend Kit, High Temperature Resistant Ceramic Heating Block, with Brass Nozzle and Silicone Sleeve, for Elegoo Neptune 4/Neptune 4 Pro 3D Printer
$32.01

Microswiss FlowTech Hotend for Elegoo Neptune 4 Plus / 4 Max - Leakproof Nozzle - Cold Nozzle Change - High Flow - All Metal Design - Made in USA
$116.09

Neptune 4 Heating Block Kit Hot End Replacement Kit,0.4mm Brass Nozzle Heating Rod Heat Block Thermistor Throat Printing Hotend Kit for Elegoo Neptune 4 3D Printer
$16.50

Olzzdda Hotend For Elegoo Neptune 4 Plus/Neptune 4 Max Ceramic Print Head Extruder Hot End Kit Heater Block Heat Cartridge Thermistor With 2 Extra Pieces Steel Nozzle
$35.34

Xirbbo Hotend For Elegoo Neptune 4 Plus/Neptune 4 Max Print Head Extruder Hot End Kit Heater Block Heating Cartridge Thermistor With Extra 2Pc Hardness Nozzle 2Pc Brass Nozzle 1Pc Silicone
$35.34

OEBUAFI Metal Hotend Kit for Anycub Vyper Kobra Plus Kobra Max 3D Printers,High Accuracy Brass Printhead,Easy to Assemble
$20.38

3-Pack Hotend Nozzles Kit Fit for Flashforge AD5X 3D Printer, Quick-Detachable All Metal Nozzle 0.25mm 0.4mm 0.6mm with Heat Dissipation Copper Block
$29.36

ELEGOO Neptune 3 Pro FDM 3D Printer, Large Printing Size 225×225×280mm | Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen
$269.99

Hotend for Kobra S1, 3D Printer Extruder Print Head with All Metal Structure for Kobra S1 Combo 3D Printers, Quick Installation (0.2mm Nozzle)
$23.11

Multi Size Nozzles for ELEGOO Neptune 4 Plus/4Max 3D Printer, Brass Hotend Nozzles 0.2/0.4/0.6/0.8/1.0mm,M6 Thread High Temperature Pointed Wear Resistant Nozzle Cleaning Kit (0.2mm)
$11.95

3D Printer Nozzle Cleaning Needle, 3D Extruder Nozzle Cleaners 0.4mm Nozzle Cleaning Tool for 3D Printer Accessory, 10Pcs
$8.92