Aussie Deal ScoutDeals for Australia
BlogSearch
Product guide

cablecc OCuLink PCIe 4.0 SFF-8611 Cable, 80cm, 90° Down-Angled

The cablecc OCuLink PCIe 4.0 cable connects two SFF-8611 ports over an 80cm active cable, with a 90-degree down-angled connector for restricted clearance. It is intended for compatible OCuLink setups using internal devices or external graphics cards and SSDs, so confirm your available interface and connector orientation before ordering.

At a glance

  • Male-to-male OCuLink SFF-8611 connectors at both ends, according to the listing.
  • The listing describes an active cable for transmitting PCI Express 4.0 signals through the OCuLink protocol.
  • A 90-degree down-angled connector is intended to help with limited space around a female port.
  • The manufacturer claims data transfer rates up to 64Gbps. This is a listing claim, not an independent measurement.
Price
$28.89Save 15%

Reference price: $33.99

Price checked: 18 Nov 2026

View offer

Pros and cons

Pros

  • The 80cm length offers more reach than a short direct connection, where the setup has compatible OCuLink ports.
  • The angled design may help route the cable in a tight space near a port.
  • An active latch is described as locking the plug to its mating connector.

Technical specifications

16 specifications
Identity
Brandcablecc
ModelSF-014-DN-0.8M-CC
Connection and performance
Cable typePCIe 4.0
Connector typeSff-8611
Connector genderMale-to-Male
Data transfer rate64 Gigabits Per Second
Number of pins22
Frequency64 GHz
Special featureData Transfer
Physical details
Length80 Centimeters
ColourBlack
ShapeRound
Indoor or outdoor useIndoor
Compatibility and compliance
Compatible deviceseGPU SSD
Recommended usesConnecting internal devices, External graphics cards/SSDs
Specification metCE

What to know before buying

  • This requires a free OCuLink interface and matching SFF-8611 female ports. Confirm port placement and down-angle orientation before buying. The listing claims up to 64Gbps but gives a separate frequency figure of 64 GHz, which is not explained. Customer ratings are low and based on a small sample, with no written feedback supplied to explain the scores.

Who is it for?

A good fit for

  • PC builders connecting compatible OCuLink SFF-8611 ports between a controller and backplane.
  • Setups using an OCuLink connection for an external graphics card or SSD, provided the connected equipment supports the required interface.

Less suited to

  • Devices without a compatible OCuLink SFF-8611 port.
  • Buyers who need a straight connector or cannot accommodate the listed down-angled orientation.
cablecc OCuLink PCIe 4.0 SFF-8611 Cable, 80cm, 90° Down-Angled · photo 2
Additional product photo 2

Customer reviews on Amazon

2.4 / 5 · 4 ratings
  • 5 stars28%28%
  • 4 stars0%0%
  • 3 stars0%0%
  • 2 stars30%30%
  • 1 star42%42%

Customer rating data is mixed but leans negative, with a small sample and a spread across one-, two- and five-star categories. Without written feedback, the ratings do not explain the reasons. For a cable where connector fit, orientation and link performance matter, treat the scores as a reason to check the port match and return terms rather than evidence of a specific fault.

Frequently asked questions

What connectors does this cable use?

The listing specifies male OCuLink SFF-8611 connectors at both ends. Check that both connected devices have matching female ports.

How long is the cable?

The listed length is 80 Centimeters.

Will it fit in a tight space?

The listing describes a 90-degree down-angled connector for limited clearance. Confirm the angle and cable routing suit your port layout.

What transfer rate does the listing claim?

It claims up to 64Gbps. The listing also gives a 64 GHz frequency figure without explaining it, so neither figure should be treated as independently verified.

cablecc OCuLink PCIe 4.0 SFF-8611 Cable, 80cm, 90° Down-Angled · photo 3
Additional product photo 3

Alternative options

Product details in Markdown